kernel.git/drivers/usb/dwc3/Makefile, branch linux-4.5.y

usb: dwc3: remove dwc3-qcom in favor of dwc3-of-simple

2015-12-15T15:12:41Z

Now that we have a generic dwc3-of-simple.c, we can use that instead of maintaining dwc3-qcom.c which is extremely similar. Cc: Ivan T. Ivanov Signed-off-by: Felipe Balbi

usb: dwc3: add generic OF glue layer

2015-12-15T15:12:41Z

For simple platforms which merely enable some clocks and populate its children, we can use this generic glue layer to avoid boilerplate code duplication. For now this supports Qcom and Xilinx, but if we find a way to add generic handling of regulators and optional PHYs, we can absorb exynos as well. Tested-by: Subbaraya Sundeep Bhatta Signed-off-by: Felipe Balbi

usb: dwc3: drop CONFIG_USB_DWC3_DEBUG

2015-07-29T14:59:18Z

now that we have no users of dev_dbg() in dwc3, we can safely remove CONFIG_USB_DWC3_DEBUG. If dev_dbg() is ever strictly necessary - and I don't see why it would, considering we want to rely on tracepoints for debug - we will depend on DYNAMIC_PRINTK to enable such messages. Signed-off-by: Felipe Balbi

usb: dwc3: add ULPI interface support

2015-05-13T17:06:52Z

Registers DWC3's ULPI interface with the ULPI bus when it's available. Signed-off-by: Heikki Krogerus Acked-by: David Cohen Signed-off-by: Felipe Balbi

usb: dwc3: remove reliance on dev_vdbg()

2015-01-27T20:00:10Z

By moving all dev_vdbg() to tracepoints, we can finally get rid of dev_vdbg() usage from dwc3. Signed-off-by: Felipe Balbi

usb: dwc3: Add Qualcomm DWC3 glue layer driver

2014-09-12T20:43:48Z

DWC3 glue layer is hardware layer around Synopsys DesignWare USB3 core. Its purpose is to supply Synopsys IP with required clocks, voltages and interface it with the rest of the SoC. Signed-off-by: Ivan T. Ivanov Signed-off-by: Andy Gross Signed-off-by: Felipe Balbi

usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC

2014-09-05T15:49:00Z

This patch adds the ST glue logic to manage the DWC3 HC on STiH407 SoC family. It manages the powerdown signal, and configures the internal glue logic and syscfg registers. [ balbi@ti.com : actually switch over to of_platform_depopulate() ] Signed-off-by: Giuseppe Cavallaro Signed-off-by: Peter Griffin Acked-by: Lee Jones Signed-off-by: Felipe Balbi

usb: dwc3: add tracepoints to aid debugging

2014-09-05T14:55:51Z

When we're debugging hard-to-reproduce and time-sensitive use cases, printk() poses too much overhead. That's when the kernel's tracing infrastructure comes into play. This patch implements a few initial tracepoints for the dwc3 driver. More traces can be added as necessary in order to ease the task of debugging dwc3. Reviewed-by: Paul Zimmerman Signed-off-by: Felipe Balbi

usb: dwc3: add Keystone specific glue layer

2013-12-12T19:43:07Z

Add Keystone platform specific glue layer to support USB3 Host mode. [ balbi@ti.com : fix order of clk_disable() and platform_device_unregister() ] Cc: Greg Kroah-Hartman Acked-by: Santosh Shilimkar Signed-off-by: WingMan Kwok Signed-off-by: Felipe Balbi

usb: dwc3: make glue layers selectable

2013-07-29T10:53:25Z

Glue layers are starting to have separate requirements. For example, OMAP's glue layer is starting to use extcon framework which no one else needs. In order to make it clear the proper dependencies, we are now allowing glue layers to be selectable so that each glue layer can list their own dependencies without messing with the core IP driver. Signed-off-by: Felipe Balbi