kernel.git/drivers/usb/dwc2/platform.c, branch linux-3.16.y

usb: dwc2: Disable descriptor dma mode by default

2014-05-27T22:42:41Z

Even though the IP supports Descriptor DMA mode, it does not support SPLIT transactions in this mode. So the driver, in its currently form, will not support LS/FS devices when connected to a HS Hub if Descriptor DMA mode is enabled. So we should just default to disable descriptor dma mode. Signed-off-by: Dinh Nguyen Acked-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman

usb: dwc2: bail out early when booting with "nousb"

2014-02-04T20:59:14Z

Add usb_disabled() check to prevent kernel oops when booting with "nousb" in the cmdline: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at bus_add_device+0xe0/0x18c LR is at device_add_groups+0x1c/0x20 ... [] (bus_add_device) from [] (device_add+0x41c/0x538) [] (device_add) from [] (usb_new_device+0x270/0x35c) [] (usb_new_device) from [] (usb_add_hcd+0x4fc/0x760) [] (usb_add_hcd) from [] (dwc2_hcd_init+0x434/0x510) [] (dwc2_hcd_init) from [] (dwc2_driver_probe+0x130/0x170) [] (dwc2_driver_probe) from [] (platform_drv_probe+0x28/0x58) Signed-off-by: Andre Heider Acked-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman

Move DWC2 driver out of staging

2014-01-13T22:44:01Z

The DWC2 driver should now be in good enough shape to move out of staging. I have stress tested it overnight on RPI running mass storage and Ethernet transfers in parallel, and for several days on our proprietary PCI-based platform. Signed-off-by: Paul Zimmerman Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman