kernel.git/drivers/usb/core, branch linux-5.19.y

usb: add quirks for Lenovo OneLink+ Dock

2022-10-24T07:56:42Z

commit 37d49519b41405b08748392c6a7f193d9f77ecd2 upstream. The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers: 17ef:1018 upstream 17ef:1019 downstream These hubs suffer from two separate problems: 1) After the host system was suspended and woken up, the hubs appear to be in a random state. Some downstream ports (both internal to the built-in audio and network controllers, and external to USB sockets) may no longer be functional. The exact list of disabled ports (if any) changes from wakeup to wakeup. Ports remain in that state until the dock is power-cycled, or until the laptop is rebooted. Wakeup sources connected to the hubs (keyboard, WoL on the integrated gigabit controller) will wake the system up from suspend, but they may no longer work after wakeup (and in that case will no longer work as wakeup source in a subsequent suspend-wakeup cycle). This issue appears in the logs with messages such as: usb 1-6.1-port4: cannot disable (err = -71) usb 1-6-port2: cannot disable (err = -71) usb 1-6.1: clear tt 1 (80c0) error -71 usb 1-6-port4: cannot disable (err = -71) usb 1-6.4: PM: dpm_run_callback(): usb_dev_resume+0x0/0x10 [usbcore] returns -71 usb 1-6.4: PM: failed to resume async: error -71 usb 1-7: reset full-speed USB device number 5 using xhci_hcd usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad? usb 1-6.1-port1: cannot disable (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad? usb 1-6.1-port1: cannot disable (err = -71) 2) Some USB devices cannot be enumerated properly. So far I have only seen the issue with USB 3.0 devices. The same devices work without problem directly connected to the host system, to other systems or to other hubs (even when those hubs are connected to the OneLink+ dock). One very reliable reproducer is this USB 3.0 HDD enclosure: 152d:9561 JMicron Technology Corp. / JMicron USA Technology Corp. Mobius I have seen it happen sporadically with other USB 3.0 enclosures, with controllers from different manufacturers, all self-powered. Typical messages in the logs: xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 6, error -62 xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 7, error -62 usb 2-1-port4: attempt power cycle xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 8, error -62 xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 9, error -62 usb 2-1-port4: unable to enumerate USB device Through trial and error, I found that the USB_QUIRK_RESET_RESUME solved the second issue. Further testing then uncovered the first issue. Test results are summarized in this table: ======================================================================================= Settings USB2 hotplug USB3 hotplug State after waking up --------------------------------------------------------------------------------------- power/control=auto works fails broken usbcore.autosuspend=-1 works works broken OR power/control=on power/control=auto works (1) works (1) works and USB_QUIRK_RESET_RESUME power/control=on works works works and USB_QUIRK_RESET_RESUME HUB_QUIRK_DISABLE_AUTOSUSPEND works works works and USB_QUIRK_RESET_RESUME ======================================================================================= In those results, the power/control settings are applied to both hubs, both on the USB2 and USB3 side, before each test. From those results, USB_QUIRK_RESET_RESUME is required to reset the hubs properly after a suspend-wakeup cycle, and the hubs must not autosuspend to work around the USB3 issue. A secondary effect of USB_QUIRK_RESET_RESUME is to prevent the hubs' upstream links from suspending (the downstream ports can still suspend). This secondary effect is used in results (1). It is enough to solve the USB3 problem. Setting USB_QUIRK_RESET_RESUME on those hubs is the smallest patch that solves both issues. Prior to creating this patch, I have used the USB_QUIRK_RESET_RESUME via the kernel command line for over a year without noticing any side effect. Thanks to Oliver Neukum @Suse for explanations of the operations of USB_QUIRK_RESET_RESUME, and requesting more testing. Signed-off-by: Jean-Francois Le Fillatre Cc: stable Link: https://lore.kernel.org/r/20220927073407.5672-1-jflf_kernel@gmx.com Signed-off-by: Greg Kroah-Hartman

USB: core: Fix RST error in hub.c

2022-09-28T09:32:01Z

commit 766a96dc558385be735a370db867e302c8f22153 upstream. A recent commit added an invalid RST expression to a kerneldoc comment in hub.c. The fix is trivial. Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls") Cc: Reported-by: Stephen Rothwell Reviewed-by: Bagas Sanjaya Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

Revert "usb: add quirks for Lenovo OneLink+ Dock"

2022-09-28T09:32:00Z

[ Upstream commit 58bfe7d8e31014d7ce246788df99c56e3cfe6c68 ] This reverts commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58. The quirk does not work properly, more work is needed to determine what should be done here. Reported-by: Oliver Neukum Cc: Jean-Francois Le Fillatre Cc: stable Fixes: 3d5f70949f1b ("usb: add quirks for Lenovo OneLink+ Dock") Link: https://lore.kernel.org/r/9a17ea86-079f-510d-e919-01bc53a6d09f@gmx.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: add quirks for Lenovo OneLink+ Dock

2022-09-28T09:31:59Z

[ Upstream commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58 ] The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers: 17ef:1018 upstream 17ef:1019 downstream Those two controllers both have problems with some USB3.0 devices, particularly self-powered ones. Typical error messages include: Timeout while waiting for setup device command device not accepting address X, error -62 unable to enumerate USB device By process of elimination the controllers themselves were identified as the cause of the problem. Through trial and error the issue was solved by using USB_QUIRK_RESET_RESUME for both chips. Signed-off-by: Jean-Francois Le Fillatre Cc: stable Link: https://lore.kernel.org/r/20220824191320.17883-1-jflf_kernel@gmx.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: core: Prevent nested device-reset calls

2022-09-08T09:24:06Z

commit 9c6d778800b921bde3bff3cff5003d1650f942d1 upstream. Automatic kernel fuzzing revealed a recursive locking violation in usb-storage: ============================================ WARNING: possible recursive locking detected 5.18.0 #3 Not tainted -------------------------------------------- kworker/1:3/1205 is trying to acquire lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 but task is already holding lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 ... stack backtrace: CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2988 [inline] check_deadlock kernel/locking/lockdep.c:3031 [inline] validate_chain kernel/locking/lockdep.c:3816 [inline] __lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053 lock_acquire kernel/locking/lockdep.c:5665 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630 __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747 usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109 r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622 usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458 device_remove drivers/base/dd.c:545 [inline] device_remove+0x11f/0x170 drivers/base/dd.c:537 __device_release_driver drivers/base/dd.c:1222 [inline] device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248 usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627 usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118 usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114 This turned out not to be an error in usb-storage but rather a nested device reset attempt. That is, as the rtl8712 driver was being unbound from a composite device in preparation for an unrelated USB reset (that driver does not have pre_reset or post_reset callbacks), its ->remove routine called usb_reset_device() -- thus nesting one reset call within another. Performing a reset as part of disconnect processing is a questionable practice at best. However, the bug report points out that the USB core does not have any protection against nested resets. Adding a reset_in_progress flag and testing it will prevent such errors in the future. Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/ Cc: stable@vger.kernel.org Reported-and-tested-by: Rondreis Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

usb: xhci_plat_remove: avoid NULL dereference

2022-08-17T13:15:38Z

[ Upstream commit d7de14d74d6551f0d097430f9893ce82ad17e5b8 ] Since commit 4736ebd7fcaff1eb8481c140ba494962847d6e0a ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports") xhci->shared_hcd can be NULL, which causes the following Oops on reboot: [ 710.124450] systemd-shutdown[1]: Rebooting. [ 710.298861] xhci-hcd xhci-hcd.2.auto: remove, state 4 [ 710.304217] usb usb3: USB disconnect, device number 1 [ 710.317441] xhci-hcd xhci-hcd.2.auto: USB bus 3 deregistered [ 710.323280] xhci-hcd xhci-hcd.2.auto: remove, state 1 [ 710.328401] usb usb2: USB disconnect, device number 1 [ 710.333515] usb 2-3: USB disconnect, device number 2 [ 710.467649] xhci-hcd xhci-hcd.2.auto: USB bus 2 deregistered [ 710.475450] Unable to handle kernel NULL pointer dereference at virtual address 00000000000003b8 [ 710.484425] Mem abort info: [ 710.487265] ESR = 0x0000000096000004 [ 710.491060] EC = 0x25: DABT (current EL), IL = 32 bits [ 710.496427] SET = 0, FnV = 0 [ 710.499525] EA = 0, S1PTW = 0 [ 710.502716] FSC = 0x04: level 0 translation fault [ 710.507648] Data abort info: [ 710.510577] ISV = 0, ISS = 0x00000004 [ 710.514462] CM = 0, WnR = 0 [ 710.517480] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b0050000 [ 710.523976] [00000000000003b8] pgd=0000000000000000, p4d=0000000000000000 [ 710.530961] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 710.536551] Modules linked in: rfkill input_leds snd_soc_simple_card snd_soc_simple_card_utils snd_soc_nau8822 designware_i2s snd_soc_core dw_hdmi_ahb_audio snd_pcm_dmaengine arm_ccn panfrost ac97_bus gpu_sched snd_pcm at24 fuse configfs sdhci_of_dwcmshc sdhci_pltfm sdhci nvme led_class mmc_core nvme_core bt1_pvt polynomial tp_serio snd_seq_midi snd_seq_midi_event snd_seq snd_timer snd_rawmidi snd_seq_device snd soundcore efivarfs ipv6 [ 710.575286] CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 5.19.0-rc7-00043-gfd8619f4fd54 #1 [ 710.583822] Hardware name: T-Platforms TF307-MB/BM1BM1-A, BIOS 5.6 07/06/2022 [ 710.590972] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 710.597949] pc : usb_remove_hcd+0x34/0x1e4 [ 710.602067] lr : xhci_plat_remove+0x74/0x140 [ 710.606351] sp : ffff800009f3b7c0 [ 710.609674] x29: ffff800009f3b7c0 x28: ffff000800960040 x27: 0000000000000000 [ 710.616833] x26: ffff800008dc22a0 x25: 0000000000000000 x24: 0000000000000000 [ 710.623992] x23: 0000000000000000 x22: ffff000805465810 x21: ffff000805465800 [ 710.631149] x20: ffff000800f80000 x19: 0000000000000000 x18: ffffffffffffffff [ 710.638307] x17: ffff000805096000 x16: ffff00080633b800 x15: ffff000806537a1c [ 710.645465] x14: 0000000000000001 x13: 0000000000000000 x12: ffff00080378d6f0 [ 710.652621] x11: ffff00080041a900 x10: ffff800009b204e8 x9 : ffff8000088abaa4 [ 710.659779] x8 : ffff000800960040 x7 : ffff800009409000 x6 : 0000000000000001 [ 710.666936] x5 : ffff800009241000 x4 : ffff800009241440 x3 : 0000000000000000 [ 710.674094] x2 : ffff000800960040 x1 : ffff000800960040 x0 : 0000000000000000 [ 710.681251] Call trace: [ 710.683704] usb_remove_hcd+0x34/0x1e4 [ 710.687467] xhci_plat_remove+0x74/0x140 [ 710.691400] platform_remove+0x34/0x70 [ 710.695165] device_remove+0x54/0x90 [ 710.698753] device_release_driver_internal+0x200/0x270 [ 710.703992] device_release_driver+0x24/0x30 [ 710.708273] bus_remove_device+0xe0/0x16c [ 710.712293] device_del+0x178/0x390 [ 710.715797] platform_device_del.part.0+0x24/0x90 [ 710.720514] platform_device_unregister+0x30/0x50 [ 710.725232] dwc3_host_exit+0x20/0x30 [ 710.728907] dwc3_remove+0x174/0x1b0 [ 710.732494] platform_remove+0x34/0x70 [ 710.736254] device_remove+0x54/0x90 [ 710.739840] device_release_driver_internal+0x200/0x270 [ 710.745078] device_release_driver+0x24/0x30 [ 710.749359] bus_remove_device+0xe0/0x16c [ 710.753380] device_del+0x178/0x390 [ 710.756881] platform_device_del.part.0+0x24/0x90 [ 710.761598] platform_device_unregister+0x30/0x50 [ 710.766314] of_platform_device_destroy+0xe8/0x100 [ 710.771119] device_for_each_child_reverse+0x70/0xc0 [ 710.776099] of_platform_depopulate+0x48/0x90 [ 710.780468] __dwc3_of_simple_teardown+0x28/0xe0 [ 710.785099] dwc3_of_simple_shutdown+0x20/0x30 [ 710.789555] platform_shutdown+0x30/0x40 [ 710.793490] device_shutdown+0x138/0x32c [ 710.797425] __do_sys_reboot+0x1c4/0x2ac [ 710.801362] __arm64_sys_reboot+0x30/0x40 [ 710.805383] invoke_syscall+0x50/0x120 [ 710.809146] el0_svc_common.constprop.0+0x68/0x124 [ 710.813950] do_el0_svc+0x3c/0xcc [ 710.817275] el0_svc+0x60/0x12c [ 710.820428] el0t_64_sync_handler+0xc0/0x13c [ 710.824710] el0t_64_sync+0x18c/0x190 [ 710.828386] Code: a9025bf5 f942c420 f9001fe0 d2800000 (b943ba62) [ 710.834498] ---[ end trace 0000000000000000 ]--- [ 710.875958] pstore: crypto_comp_compress failed, ret = -22! [ 710.895047] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 710.902757] Kernel Offset: disabled [ 710.906255] CPU features: 0x800,00004811,00001082 [ 710.910971] Memory Limit: none [ 710.927474] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- To avoid the problem check for NULL in usb_remove_hcd. Fixes: 4736ebd7fcaf ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports") Signed-off-by: Alexey Sheplyakov Link: https://lore.kernel.org/r/20220722141700.1271439-1-asheplyakov@basealt.ru Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: HCD: Fix URB giveback issue in tasklet function

2022-08-17T13:13:57Z

commit 26c6c2f8a907c9e3a2f24990552a4d77235791e6 upstream. Usb core introduce the mechanism of giveback of URB in tasklet context to reduce hardware interrupt handling time. On some test situation(such as FIO with 4KB block size), when tasklet callback function called to giveback URB, interrupt handler add URB node to the bh->head list also. If check bh->head list again after finish all URB giveback of local_list, then it may introduce a "dynamic balance" between giveback URB and add URB to bh->head list. This tasklet callback function may not exit for a long time, which will cause other tasklet function calls to be delayed. Some real-time applications(such as KB and Mouse) will see noticeable lag. In order to prevent the tasklet function from occupying the cpu for a long time at a time, new URBS will not be added to the local_list even though the bh->head list is not empty. But also need to ensure the left URB giveback to be processed in time, so add a member high_prio for structure giveback_urb_bh to prioritize tasklet and schelule this tasklet again if bh->head list is not empty. At the same time, we are able to prioritize tasklet through structure member high_prio. So, replace the local high_prio_bh variable with this structure member in usb_hcd_giveback_urb. Fixes: 94dfd7edfd5c ("USB: HCD: support giveback of URB in tasklet context") Cc: stable Reviewed-by: Alan Stern Signed-off-by: Weitao Wang Link: https://lore.kernel.org/r/20220726074918.5114-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman

USB: new quirk for Dell Gen 2 devices

2022-05-20T19:18:23Z

Add USB_QUIRK_NO_LPM and USB_QUIRK_RESET_RESUME quirks for Dell usb gen 2 device to not fail during enumeration. Found this bug on own testing Signed-off-by: Monish Kumar R Cc: stable Link: https://lore.kernel.org/r/20220520130044.17303-1-monish.kumar.r@intel.com Signed-off-by: Greg Kroah-Hartman

usb: hub: Simplify error and success path in port_over_current_notify

2022-05-19T16:14:49Z

kasprintf() returns NULL or valid pointer. Since kfree() can handle NULL pointer condition, simplify error and success paths in function port_over_current_notify() by removing multiple error path labels. Signed-off-by: Bhuvanesh Surachari Signed-off-by: Eugeniu Rosca Link: https://lore.kernel.org/r/1652369834-4480-1-git-send-email-erosca@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman

usb: core: hcd: Add support for deferring roothub registration

2022-05-12T11:59:59Z

It has been observed with certain PCIe USB cards (like Inateck connected to AM64 EVM or J7200 EVM) that as soon as the primary roothub is registered, port status change is handled even before xHC is running leading to cold plug USB devices not detected. For such cases, registering both the root hubs along with the second HCD is required. Add support for deferring roothub registration in usb_add_hcd(), so that both primary and secondary roothubs are registered along with the second HCD. This patch has been added and reverted earier as it triggered a race in usb device enumeration. That race is now fixed in 5.16-rc3, and in stable back to 5.4 commit 6cca13de26ee ("usb: hub: Fix locking issues with address0_mutex") commit 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20220510091630.16564-2-kishon@ti.com Signed-off-by: Greg Kroah-Hartman