kernel.git/drivers/usb/core, branch linux-5.12.y

usb: core: hub: Disable autosuspend for Cypress CY7C65632

2021-06-23T12:44:05Z

commit a7d8d1c7a7f73e780aa9ae74926ae5985b2f895f upstream. The Cypress CY7C65632 appears to have an issue with auto suspend and detecting devices, not too dissimilar to the SMSC 5534B hub. It is easiest to reproduce by connecting multiple mass storage devices to the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts result in the devices not being detected. It is however possible to make them appear using lsusb -v. Disabling autosuspend for this hub resolves the issue. Fixes: 1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org Signed-off-by: Andrew Lunn Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch Signed-off-by: Greg Kroah-Hartman

usb: core: reduce power-on-good delay time of root hub

2021-06-03T07:09:52Z

commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream. Return the exactly delay time given by root hub descriptor, this helps to reduce resume time etc. Due to the root hub descriptor is usually provided by the host controller driver, if there is compatibility for a root hub, we can fix it easily without affect other root hub Acked-by: Alan Stern Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

USB: usbfs: Don't WARN about excessively large memory allocations

2021-06-03T07:09:31Z

commit 4f2629ea67e7225c3fd292c7fe4f5b3c9d6392de upstream. Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers. To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers. CC: Andrew Morton CC: Reported-and-tested-by: syzbot+882a85c0c8ec4a3e2281@syzkaller.appspotmail.com Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/20210518201835.GA1140918@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

usb: core: hub: fix race condition about TRSMRCY of resume

2021-05-19T08:56:40Z

commit 975f94c7d6c306b833628baa9aec3f79db1eb3a1 upstream. This may happen if the port becomes resume status exactly when usb_port_resume() gets port status, it still need provide a TRSMCRY time before access the device. CC: Reported-by: Tianping Fang Acked-by: Alan Stern Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20210512020738.52961-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: core: hub: Fix PM reference leak in usb_port_resume()

2021-05-12T06:39:38Z

[ Upstream commit 025f97d188006eeee4417bb475a6878d1e0eed3f ] pm_runtime_get_sync will increment pm usage counter even it failed. thus a pairing decrement is needed. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot Signed-off-by: Bixuan Cui Link: https://lore.kernel.org/r/20210408130831.56239-1-cuibixuan@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: Add reset-resume quirk for WD19's Realtek Hub

2021-05-07T10:53:26Z

commit ca91fd8c7643d93bfc18a6fec1a0d3972a46a18a upstream. Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work after the system resumes from suspend with remote wakeup enabled device connected: [ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71) [ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71) Information of this hub: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 5 D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=5487 Rev= 1.47 S: Manufacturer=Dell Inc. S: Product=Dell dock C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms The failure results from the ETIMEDOUT by chance when turning on the suspend feature for the specified port of the hub. The port seems to be in an unknown state so the hub_activate during resume fails the hub_port_status, then the hub will fail to work. The quirky hub needs the reset-resume quirk to function correctly. Acked-by: Alan Stern Signed-off-by: Chris Chiu Cc: stable Link: https://lore.kernel.org/r/20210420174651.6202-1-chris.chiu@canonical.com Signed-off-by: Greg Kroah-Hartman

USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 Ethernet

2021-05-07T10:53:26Z

commit 8f23fe35ff1e5491b4d279323a8209a31f03ae65 upstream. This is another branded 8153 device that doesn't work well with LPM enabled: [ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71 So disable LPM to resolve the issue. Signed-off-by: Kai-Heng Feng BugLink: https://bugs.launchpad.net/bugs/1922651 Link: https://lore.kernel.org/r/20210412135455.791971-1-kai.heng.feng@canonical.com Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem

2021-03-23T12:27:40Z

This LTE modem (M.2 card) has a bug in its power management: there is some kind of race condition for U3 wake-up between the host and the device. The modem firmware sometimes crashes/locks when both events happen at the same time and the modem fully drops off the USB bus (and sometimes re-enumerates, sometimes just gets stuck until the next reboot). Tested with the modem wired to the XHCI controller on an AMD 3015Ce platform. Without the patch, the modem dropped of the USB bus 5 times in 3 days. With the quirk, it stayed connected for a week while the 'runtime_suspended_time' counter incremented as excepted. Signed-off-by: Vincent Palatin Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org Cc: stable Signed-off-by: Greg Kroah-Hartman

drm: Use USB controller's DMA mask when importing dmabufs

2021-03-11T10:11:33Z

USB devices cannot perform DMA and hence have no dma_mask set in their device structure. Therefore importing dmabuf into a USB-based driver fails, which breaks joining and mirroring of display in X11. For USB devices, pick the associated USB controller as attachment device. This allows the DRM import helpers to perform the DMA setup. If the DMA controller does not support DMA transfers, we're out of luck and cannot import. Our current USB-based DRM drivers don't use DMA, so the actual DMA device is not important. Tested by joining/mirroring displays of udl and radeon under Gnome/X11. v8: * release dmadev if device initialization fails (Noralf) * fix commit description (Noralf) v7: * fix use-before-init bug in gm12u320 (Dan) v6: * implement workaround in DRM drivers and hold reference to DMA device while USB device is in use * remove dev_is_usb() (Greg) * collapse USB helper into usb_intf_get_dma_device() (Alan) * integrate Daniel's TODO statement (Daniel) * fix typos (Greg) v5: * provide a helper for USB interfaces (Alan) * add FIXME item to documentation and TODO list (Daniel) v4: * implement workaround with USB helper functions (Greg) * use struct usb_device->bus->sysdev as DMA device (Takashi) v3: * drop gem_create_object * use DMA mask of USB controller, if any (Daniel, Christian, Noralf) v2: * move fix to importer side (Christian, Daniel) * update SHMEM and CMA helpers for new PRIME callbacks Signed-off-by: Thomas Zimmermann Fixes: 6eb0233ec2d0 ("usb: don't inherity DMA properties for USB devices") Tested-by: Pavel Machek Reviewed-by: Greg Kroah-Hartman Acked-by: Christian König Acked-by: Daniel Vetter Acked-by: Noralf Trønnes Cc: Christoph Hellwig Cc: Greg Kroah-Hartman Cc: # v5.10+ Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.de Signed-off-by: Maarten Lankhorst

Merge tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2021-02-25T18:17:31Z

Pull Kbuild updates from Masahiro Yamada: - Fix false-positive build warnings for ARCH=ia64 builds - Optimize dictionary size for module compression with xz - Check the compiler and linker versions in Kconfig - Fix misuse of extra-y - Support DWARF v5 debug info - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x exceeded the limit - Add generic syscall{tbl,hdr}.sh for cleanups across arches - Minor cleanups of genksyms - Minor cleanups of Kconfig * tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits) initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD kbuild: remove deprecated 'always' and 'hostprogs-y/m' kbuild: parse C= and M= before changing the working directory kbuild: reuse this-makefile to define abs_srctree kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig kconfig: omit --oldaskconfig option for 'make config' kconfig: fix 'invalid option' for help option kconfig: remove dead code in conf_askvalue() kconfig: clean up nested if-conditionals in check_conf() kconfig: Remove duplicate call to sym_get_string_value() Makefile: Remove # characters from compiler string Makefile: reuse CC_VERSION_TEXT kbuild: check the minimum linker version in Kconfig kbuild: remove ld-version macro scripts: add generic syscallhdr.sh scripts: add generic syscalltbl.sh arch: syscalls: remove $(srctree)/ prefix from syscall tables arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work gen_compile_commands: prune some directories kbuild: simplify access to the kernel's version ...