kernel.git/drivers/usb/core/port.c, branch linux-6.2.y

usb: core: stop USB enumeration if too many retries

2022-11-08T15:50:21Z

When a broken USB accessory connects to a USB host, usbcore might keep doing enumeration retries. If the host has a watchdog mechanism, the kernel panic will happen on the host. This patch provides an attribute early_stop to limit the numbers of retries for each port of a hub. If a port was marked with early_stop attribute, unsuccessful connection attempts will fail quickly. In addition, if an early_stop port has failed to initialize, it will ignore all future connection events until early_stop attribute is clear. Signed-off-by: Ray Chi Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20221107072754.3336357-1-raychi@google.com Signed-off-by: Greg Kroah-Hartman

usb: core: Use kstrtobool() instead of strtobool()

2022-11-03T14:46:01Z

strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file () Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/f01ef2ddaf12a6412127611617786adc1234e0b4.1667336095.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman

usb: hub: port: add sysfs entry to switch port power

2022-06-12T04:49:46Z

In some cases the port of an hub needs to be disabled or switched off and on again. E.g. when the connected device needs to be re-enumerated. Or it needs to be explicitly disabled while the rest of the usb tree stays working. For this purpose this patch adds an sysfs switch to enable/disable the port on any hub. In the case the hub is supporting power switching, the power line will be disabled to the connected device. When the port gets disabled, the associated device gets disconnected and removed from the logical usb tree. No further device will be enumerated on that port until the port gets enabled again. Reviewed-by: Alan Stern Signed-off-by: Michael Grzeschik Link: https://lore.kernel.org/r/20220607114522.3359148-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman

usb: core: Unregister device on component_add() failure

2022-02-11T09:57:21Z

Commit 8c67d06f3fd9 ("usb: Link the ports to the connectors they are attached to") creates a link to the USB Type-C connector for every new port that is added when possible. If component_add() fails, usb_hub_create_port_device() prints a warning but does not unregister the device and does not return errors to the callers. Syzbot reported a "WARNING in component_del()". Fix this issue in usb_hub_create_port_device by calling device_unregister() and returning the errors from component_add(). Fixes: 8c67d06f3fd9 ("usb: Link the ports to the connectors they are attached to") Reported-and-tested-by: syzbot+60df062e1c41940cae0f@syzkaller.appspotmail.com Reviewed-by: Heikki Krogerus Signed-off-by: Fabio M. De Francesco Link: https://lore.kernel.org/r/20220209164500.8769-1-fmdefrancesco@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: Link the ports to the connectors they are attached to

2021-12-30T11:13:04Z

Creating link to the USB Type-C connector for every new port that is added when possible. Reviewed-by: Andy Shevchenko Acked-by: Rafael J. Wysocki Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20211223082349.45616-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

USB: core: Constify static attribute_group structs

2020-11-26T12:40:42Z

These are never modified, so make them const to allow the compiler to put them in read-only memory. Done with the help of coccinelle. Signed-off-by: Rikard Falkeborn Link: https://lore.kernel.org/r/20201125162500.37228-2-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: core: port: do error out if usb_autopm_get_interface() fails

2020-03-04T09:58:16Z

Reviewing a fresh portion of coverity defects in USB core (specifically CID 1458999), Alan Stern noted below in [1]: On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote: > A revised search finds line 997 in drivers/usb/core/hub.c and lines > 216, 269 in drivers/usb/core/port.c. (I didn't try looking in any > other directories.) AFAICT all three of these should check the > return value, although a error message in the kernel log probably > isn't needed. Factor out the usb_port_runtime_{resume,suspend}() changes into a standalone patch to allow conflict-free porting on top of stable v3.9+. [1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@iolanthe.rowland.org Fixes: 971fcd492cebf5 ("usb: add runtime pm support for usb port device") Cc: stable@vger.kernel.org # v3.9+ Suggested-by: Alan Stern Signed-off-by: Eugeniu Rosca Acked-by: Alan Stern Link: https://lore.kernel.org/r/20200226175036.14946-3-erosca@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman

USB: Disable USB2 LPM at shutdown

2019-08-05T15:19:46Z

The QCA Rome USB Bluetooth controller has several issues once LPM gets enabled: - Fails to get enumerated in coldboot. [1] - Drains more power (~ 0.2W) when the system is in S5. [2] - Disappears after a warmboot. [2] The issue happens because the device lingers at LPM L1 in S5, so device can't get enumerated even after a reboot. Disable LPM at shutdown to solve the issue. [1] https://bugs.launchpad.net/bugs/1757218 [2] https://patchwork.kernel.org/patch/10607097/ Signed-off-by: Kai-Heng Feng Link: https://lore.kernel.org/r/20190805142412.23965-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman

usb: export firmware port location in sysfs

2018-10-02T19:05:30Z

The platform firmware "location" data is used to find port peer relationships. But firmware is an unreliable source, and there are real world examples of errors leading to missing or wrong peer relationships. Debugging this is currently hard. Exporting the location attribute makes it easier to spot mismatches between the firmware data and the real world. Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

usb: hub: Per-port setting to use old enumeration scheme

2018-05-31T10:48:17Z

The "old" enumeration scheme is considerably faster (it takes ~244ms instead of ~356ms to get the descriptor). It is currently only possible to use the old scheme globally (/sys/module/usbcore/parameters/old_scheme_first), which is not desirable as the new scheme was introduced to increase compatibility with more devices. However, in our case, we care about time-to-active for a specific USB device (which we make the firmware for), on a specific port (that is pogo-pin based: not a standard USB port). This new sysfs option makes it possible to use the old scheme on a single port only. Signed-off-by: Nicolas Boichat Signed-off-by: Greg Kroah-Hartman