kernel.git/drivers/usb/core/hub.c, branch linux-3.4.y

Revert "USB: Add device quirk for ASUS T100 Base Station keyboard"

2016-10-26T15:15:44Z

This reverts commit eea5a87d270e8d6925063019c3b0f3ff61fcb49a. Conflicts: drivers/usb/core/quirks.c include/linux/usb/quirks.h Signed-off-by: Zefan Li

USB: fix invalid memory access in hub_activate()

2016-10-26T15:15:41Z

commit e50293ef9775c5f1cf3fcc093037dd6a8c5684ea upstream. Commit 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by: Alan Stern Reported-by: Alexandru Cornea Tested-by: Alexandru Cornea Fixes: 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") Signed-off-by: Greg Kroah-Hartman [lizf: Backported to 3.4: add forward declaration of hub_release()] Signed-off-by: Zefan Li

usb: core: Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset

2015-10-22T01:20:03Z

commit fb6d1f7df5d25299fd7b3e84b72b8851d3634764 upstream. Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset. Dissolve the function hub_port_finish_reset() completely and divide the actions to be taken into those which need to be done after each reset attempt and those which need to be done after the full procedure is complete, and place them in the appropriate places in hub_port_reset(). Also, remove an unneeded forward declaration of hub_port_reset(). Verbose Problem Description: USB 3.0 devices may be "lost for good" during a hub port reset. This makes Linux unable to boot from USB 3.0 devices in certain constellations of host controllers and devices, because the USB device is lost during initialization, preventing the rootfs from being mounted. The underlying problem is that in the affected constellations, during the processing inside hub_port_reset(), the hub link state goes from 0 to SS.inactive after the initial reset, and back to 0 again only after the following "warm" reset. However, hub_port_finish_reset() is called after each reset attempt and sets the state the connected USB device based on the "preliminary" status of the hot reset to USB_STATE_NOTATTACHED due to SS.inactive, yet when the following warm reset is complete and hub_port_finish_reset() is called again, its call to set the device to USB_STATE_DEFAULT is blocked by usb_set_device_state() which does not allow taking USB devices out of USB_STATE_NOTATTACHED state. Thanks to Alan Stern for guiding me to the proper solution and how to submit it. Link: http://lkml.kernel.org/r/trinity-25981484-72a9-4d46-bf17-9c1cf9301a31-1432073240136%20()%203capp-gmx-bs27 Signed-off-by: Robert Schlabbach Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman [lizf: Backported to 3.4: - adjust context - s/usb_clear_port_feature/clear_port_feature - hub_port_warm_reset_required() takes only two arguments] Signed-off-by: Zefan Li

USB: core: add device-qualifier quirk

2015-02-02T09:05:12Z

commit 2a159389bf5d962359349a76827b2f683276a1c7 upstream. Add new quirk for devices that cannot handle requests for the device_qualifier descriptor. A USB-2.0 compliant device must respond to requests for the device_qualifier descriptor (even if it's with a request error), but at least one device is known to misbehave after such a request. Suggested-by: Bjørn Mork Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman Signed-off-by: Zefan Li

USB: Add device quirk for ASUS T100 Base Station keyboard

2015-02-02T09:04:39Z

commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 upstream. This full-speed USB device generates spurious remote wakeup event as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result, Linux can't enter system suspend and S0ix power saving modes once this keyboard is used. This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk. With this quirk set, wakeup capability will be ignored during device configure. This patch could be back-ported to kernels as old as 2.6.39. Signed-off-by: Lu Baolu Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman Signed-off-by: Zefan Li

usb: hub: take hub->hdev reference when processing from eventlist

2014-12-01T10:02:29Z

commit c605f3cdff53a743f6d875b76956b239deca1272 upstream. During surprise device hotplug removal tests, it was observed that hub_events may try to call usb_lock_device on a device that has already been freed. Protect the usb_device by taking out a reference (under the hub_event_lock) when hub_events pulls it off the list, returning the reference after hub_events is finished using it. Signed-off-by: Joe Lawrence Suggested-by: David Bulkow for using kref Suggested-by: Alan Stern for placement Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman Signed-off-by: Zefan Li

USB: Avoid runtime suspend loops for HCDs that can't handle suspend/resume

2014-06-11T19:04:13Z

commit 8ef42ddd9a53b73e6fc3934278710c27f80f324f upstream. Not all host controller drivers have bus-suspend and bus-resume methods. When one doesn't, it will cause problems if runtime PM is enabled in the kernel. The PM core will attempt to suspend the controller's root hub, the suspend will fail because there is no bus-suspend routine, and a -EBUSY error code will be returned to the PM core. This will cause the suspend attempt to be repeated shortly thereafter, in a never-ending loop. Part of the problem is that the original error code -ENOENT gets changed to -EBUSY in usb_runtime_suspend(), on the grounds that the PM core will interpret -ENOENT as meaning that the root hub has gotten into a runtime-PM error state. While this change is appropriate for real USB devices, it's not such a good idea for a root hub. In fact, considering the root hub to be in a runtime-PM error state would not be far from the truth. Therefore this patch updates usb_runtime_suspend() so that it adjusts error codes only for non-root-hub devices. Furthermore, the patch attempts to prevent the problem from occurring in the first place by not enabling runtime PM by default for root hubs whose host controller driver doesn't have bus_suspend and bus_resume methods. Signed-off-by: Alan Stern Reported-by: Will Deacon Tested-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

USB: unbind all interfaces before rebinding any

2014-05-06T14:51:45Z

commit 6aec044cc2f5670cf3b143c151c8be846499bd15 upstream. When a driver doesn't have pre_reset, post_reset, or reset_resume methods, the USB core unbinds that driver when its device undergoes a reset or a reset-resume, and then rebinds it afterward. The existing straightforward implementation can lead to problems, because each interface gets unbound and rebound before the next interface is handled. If a driver claims additional interfaces, the claim may fail because the old binding instance may still own the additional interface when the new instance tries to claim it. This patch fixes the problem by first unbinding all the interfaces that are marked (i.e., their needs_binding flag is set) and then rebinding all of them. The patch also makes the helper functions in driver.c a little more uniform and adjusts some out-of-date comments. Signed-off-by: Alan Stern Reported-and-tested-by: "Poulain, Loic" Signed-off-by: Greg Kroah-Hartman

usb: hub: Clear Port Reset Change during init/resume

2014-04-14T13:44:29Z

commit e92aee330837e4911553761490a8fb843f2053a6 upstream. This patch adds the Port Reset Change flag to the set of bits that are preemptively cleared on init/resume of a hub. In theory this bit should never be set unexpectedly... in practice it can still happen if BIOS, SMM or ACPI code plays around with USB devices without cleaning up correctly. This is especially dangerous for XHCI root hubs, which don't generate any more Port Status Change Events until all change bits are cleared, so this is a good precaution to have (similar to how it's already done for the Warm Port Reset Change flag). Signed-off-by: Julius Werner Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: - Adjust context - s/usb_clear_port_feature/clear_port_feature/] Signed-off-by: Ben Hutchings [yangyl: Backported to 3.4: Adjust context] Signed-off-by: Yang Yingliang Signed-off-by: Greg Kroah-Hartman

usb: Disable USB 2.0 Link PM before device reset.

2014-04-14T13:44:27Z

commit dcc01c0864823f91c3bf3ffca6613e2351702b87 upstream. Before the USB core resets a device, we need to disable the L1 timeout for the roothub, if USB 2.0 Link PM is enabled. Otherwise the port may transition into L1 in between descriptor fetches, before we know if the USB device descriptors changed. LPM will be re-enabled after the full device descriptors are fetched, and we can confirm the device still supports USB 2.0 LPM after the reset. We don't need to wait for the USB device to exit L1 before resetting the device, since the xHCI roothub port diagrams show a transition to the Reset state from any of the Ux states (see Figure 34 in the 2012-08-14 xHCI specification update). This patch should be backported to kernels as old as 3.2, that contain the commit 65580b4321eb36f16ae8b5987bfa1bb948fc5112 "xHCI: set USB2 hardware LPM". That was the first commit to enable USB 2.0 hardware-driven Link Power Management. Signed-off-by: Sarah Sharp [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings Cc: Yang Yingliang Signed-off-by: Greg Kroah-Hartman