kernel.git/drivers/usb/core/hub.c, branch linux-3.14.y

usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices

2016-09-07T06:29:59Z

commit 8a1b2725a60d3267135c15e80984b4406054f650 upstream. Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

USB: fix invalid memory access in hub_activate()

2016-08-16T07:29:01Z

commit e50293ef9775c5f1cf3fcc093037dd6a8c5684ea upstream. Commit 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by: Alan Stern Reported-by: Alexandru Cornea Tested-by: Alexandru Cornea Fixes: 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") Signed-off-by: Greg Kroah-Hartman [ luis: backported to 3.16: - Added forward declaration of hub_release() which mainline had with commit 32a6958998c5 ("usb: hub: convert khubd into workqueue") ] Signed-off-by: Luis Henriques Signed-off-by: Charles (Chas) Williams Signed-off-by: Greg Kroah-Hartman

Revert "usb: hub: do not clear BOS field during reset device"

2016-04-20T06:40:46Z

commit e5bdfd50d6f76077bf8441d130c606229e100d40 upstream. This reverts commit d8f00cd685f5c8e0def8593e520a7fef12c22407. Tony writes: This upstream commit is causing an oops: d8f00cd685f5 ("usb: hub: do not clear BOS field during reset device") This patch has already been included in several -stable kernels. Here are the affected kernels: 4.5.0-rc4 (current git) 4.4.2 4.3.6 (currently in review) 4.1.18 3.18.27 3.14.61 How to reproduce the problem: Boot kernel with slub debugging enabled (otherwise memory corruption will cause random oopses later instead of immediately) Plug in USB 3.0 disk to xhci USB 3.0 port dd if=/dev/sdc of=/dev/null bs=65536 (where /dev/sdc is the USB 3.0 disk) Unplug USB cable while dd is still going Oops is immediate: Reported-by: Tony Battersby Cc: Du, Changbin Cc: Roger Quadros Signed-off-by: Greg Kroah-Hartman

usb: hub: fix a typo in hub_port_init() leading to wrong logic

2016-04-12T16:12:40Z

commit 0d5ce778c43bf888328231bcdce05d5c860655aa upstream. A typo of j for i led to a logic bug. To rule out future confusion, the variable names are made meaningful. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

usb: retry reset if a device times out

2016-04-12T16:12:40Z

commit 264904ccc33c604d4b3141bbd33808152dfac45b upstream. Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.html Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

usb: hub: do not clear BOS field during reset device

2016-02-17T20:34:38Z

commit d8f00cd685f5c8e0def8593e520a7fef12c22407 upstream. In function usb_reset_and_verify_device, the old BOS descriptor may still be used before allocating a new one. (usb_unlocked_disable_lpm function uses it under the situation that it fails to disable lpm.) So we cannot set the udev->bos to NULL before that, just keep what it was. It will be overwrite when allocating a new one. Crash log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [] usb_enable_link_state+0x2d/0x2f0 Call Trace: [] ? usb_set_lpm_timeout+0x12b/0x140 [] usb_enable_lpm+0x81/0xa0 [] usb_disable_lpm+0xa8/0xc0 [] usb_unlocked_disable_lpm+0x2c/0x50 [] usb_reset_and_verify_device+0xc3/0x710 [] ? usb_sg_wait+0x13d/0x190 [] usb_reset_device+0x133/0x280 [] usb_stor_port_reset+0x61/0x70 [] usb_stor_invoke_transport+0x88/0x520 Signed-off-by: Du, Changbin Signed-off-by: Greg Kroah-Hartman

USB: add quirk for devices with broken LPM

2016-01-23T04:34:52Z

commit ad87e03213b552a5c33d5e1e7a19a73768397010 upstream. Some USB device / host controller combinations seem to have problems with Link Power Management. For example, Steinar found that his xHCI controller wouldn't handle bandwidth calculations correctly for two video cards simultaneously when LPM was enabled, even though the bus had plenty of bandwidth available. This patch introduces a new quirk flag for devices that should remain disabled for LPM, and creates quirk entries for Steinar's devices. Signed-off-by: Alan Stern Reported-by: Steinar H. Gunderson Signed-off-by: Greg Kroah-Hartman

usb: core: hub: use new USB_RESUME_TIMEOUT

2015-05-06T19:59:13Z

commit bbc78c07a51f6fd29c227b1220a9016e585358ba upstream. Make sure we're using the new macro, so our resume signaling will always pass certification. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

USB: core: add device-qualifier quirk

2014-11-14T17:00:05Z

commit 2a159389bf5d962359349a76827b2f683276a1c7 upstream. Add new quirk for devices that cannot handle requests for the device_qualifier descriptor. A USB-2.0 compliant device must respond to requests for the device_qualifier descriptor (even if it's with a request error), but at least one device is known to misbehave after such a request. Suggested-by: Bjørn Mork Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: Add device quirk for ASUS T100 Base Station keyboard

2014-10-15T06:36:43Z

commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 upstream. This full-speed USB device generates spurious remote wakeup event as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result, Linux can't enter system suspend and S0ix power saving modes once this keyboard is used. This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk. With this quirk set, wakeup capability will be ignored during device configure. This patch could be back-ported to kernels as old as 2.6.39. Signed-off-by: Lu Baolu Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman