kernel.git/drivers/usb/chipidea/udc.c, branch linux-4.19.y

usb: chipidea: udc: enable suspend interrupt after usb reset

2024-11-08T15:19:17Z

[ Upstream commit e4fdcc10092fb244218013bfe8ff01c55d54e8e4 ] Currently, suspend interrupt is enabled before pullup enable operation. This will cause a suspend interrupt assert right after pullup DP. This suspend interrupt is meaningless, so this will ignore such interrupt by enable it after usb reset completed. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240823073832.1702135-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: udc: check request status before setting device address

2022-07-02T14:27:34Z

commit b24346a240b36cfc4df194d145463874985aa29b upstream. The complete() function may be called even though request is not completed. In this case, it's necessary to check request status so as not to set device address wrongly. Fixes: 10775eb17bee ("usb: chipidea: udc: update gadget states according to ch9") cc: Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: don't do hardware access if gadget has stopped

2019-09-06T08:22:15Z

commit cbe85c88ce80fb92956a0793518d415864dcead8 upstream. After _gadget_stop_activity is executed, we can consider the hardware operation for gadget has finished, and the udc can be stopped and enter low power mode. So, any later hardware operations (from usb_ep_ops APIs or usb_gadget_ops APIs) should be considered invalid, any deinitializatons has been covered at _gadget_stop_activity. I meet this problem when I plug out usb cable from PC using mass_storage gadget, my callstack like: vbus interrupt->.vbus_session-> composite_disconnect ->pm_runtime_put_sync(&_gadget->dev), the composite_disconnect will call fsg_disable, but fsg_disable calls usb_ep_disable using async way, there are register accesses for usb_ep_disable. So sometimes, I get system hang due to visit register without clock, sometimes not. The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution. See: http://marc.info/?l=linux-usb&m=138541769810983&w=2. Cc: #v4.9+ Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20190820020503.27080-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: workaround for endpoint conflict issue

2019-06-25T03:35:53Z

commit c19dffc0a9511a7d7493ec21019aefd97e9a111b upstream. An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub. The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs. There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest. Cc: #v3.14+ Cc: Fabio Estevam Cc: Greg KH Cc: Sergei Shtylyov Cc: Jun Li Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

USB: chipidea: Remove redundant license text

2017-11-07T14:45:01Z

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Thierry Reding Cc: Jonathan Hunter Acked-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02Z

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: chipidea: do charger detection in vbus session

2017-09-21T03:15:56Z

In case the usb phy has the capability to detect usb charger type, do it when vbus is on. Signed-off-by: Li Jun Signed-off-by: Peter Chen

usb: chipidea: udc: Support SKB alignment quirk

2017-08-24T09:40:42Z

NVIDIA Tegra20 UDC can't cope with unaligned DMA and require a USB gadget quirk that avoids SKB buffer alignment to be set in order to make Ethernet Gadget working. Later Tegra generations do not require that quirk. Let's add a new platform data flag that allows to enable USB gadget quirk for platforms that require it. Signed-off-by: Dmitry Osipenko Acked-by: Peter Chen Signed-off-by: Peter Chen

usb: chipidea: udc: compress return logic into line

2017-07-19T01:49:11Z

Simplify return logic to avoid unnecessary variable assignment. This issue was detected using Coccinelle and the following semantic patch: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Gustavo A. R. Silva Signed-off-by: Peter Chen

usb: chipidea: udc: fix NULL pointer dereference if udc_start failed

2017-05-18T01:07:14Z

Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET] too early in ci_hdrc_gadget_init(), if udc_start() fails due to some reason, the ci->roles[CI_ROLE_GADGET] check in ci_hdrc_gadget_destroy can't protect us. We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if udc_start() succeed. [ 1.398550] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 1.448600] PC is at dma_pool_free+0xb8/0xf0 [ 1.453012] LR is at dma_pool_free+0x28/0xf0 [ 2.113369] [] dma_pool_free+0xb8/0xf0 [ 2.118857] [] destroy_eps+0x4c/0x68 [ 2.124165] [] ci_hdrc_gadget_destroy+0x28/0x50 [ 2.130461] [] ci_hdrc_probe+0x588/0x7e8 [ 2.136129] [] platform_drv_probe+0x50/0xb8 [ 2.142066] [] driver_probe_device+0x1fc/0x2a8 [ 2.148270] [] __device_attach_driver+0x9c/0xf8 [ 2.154563] [] bus_for_each_drv+0x58/0x98 [ 2.160317] [] __device_attach+0xc4/0x138 [ 2.166072] [] device_initial_probe+0x10/0x18 [ 2.172185] [] bus_probe_device+0x94/0xa0 [ 2.177940] [] device_add+0x3f0/0x560 [ 2.183337] [] platform_device_add+0x180/0x240 [ 2.189541] [] ci_hdrc_add_device+0x440/0x4f8 [ 2.195654] [] ci_hdrc_usb2_probe+0x13c/0x2d8 [ 2.201769] [] platform_drv_probe+0x50/0xb8 [ 2.207705] [] driver_probe_device+0x1fc/0x2a8 [ 2.213910] [] __driver_attach+0xac/0xb0 [ 2.219575] [] bus_for_each_dev+0x60/0xa0 [ 2.225329] [] driver_attach+0x20/0x28 [ 2.230816] [] bus_add_driver+0x1d0/0x238 [ 2.236571] [] driver_register+0x60/0xf8 [ 2.242237] [] __platform_driver_register+0x44/0x50 [ 2.248891] [] ci_hdrc_usb2_driver_init+0x18/0x20 [ 2.255365] [] do_one_initcall+0x38/0x128 [ 2.261121] [] kernel_init_freeable+0x1ac/0x250 [ 2.267414] [] kernel_init+0x10/0x100 [ 2.272810] [] ret_from_fork+0x10/0x50 Cc: stable Fixes: 3f124d233e97 ("usb: chipidea: add role init and destroy APIs") Signed-off-by: Jisheng Zhang Signed-off-by: Peter Chen