kernel.git/drivers/usb/chipidea/core.c, branch linux-5.4.y

usb: chipidea: wait controller resume finished for wakeup irq

2024-01-25T22:34:29Z

commit 128d849074d05545becf86e713715ce7676fc074 upstream. After the chipidea driver introduce extcon for id and vbus, it's able to wakeup from another irq source, in case the system with extcon ID cable, wakeup from usb ID cable and device removal, the usb device disconnect irq may come firstly before the extcon notifier while system resume, so we will get 2 "wakeup" irq, one for usb device disconnect; and one for extcon ID cable change(real wakeup event), current driver treat them as 2 successive wakeup irq so can't handle it correctly, then finally the usb irq can't be enabled. This patch adds a check to bypass further usb events before controller resume finished to fix it. Fixes: 1f874edcb731 ("usb: chipidea: add runtime power management support") cc: Acked-by: Peter Chen Signed-off-by: Xu Yang Signed-off-by: Li Jun Link: https://lore.kernel.org/r/20231228110753.1755756-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: fix missing goto in `ci_hdrc_probe`

2023-05-17T09:35:49Z

[ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ] From the comment of ci_usb_phy_init, it returns an error code if usb_phy_init has failed, and it should do some clean up, not just return directly. Fix this by goto the error handling. Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core") Reviewed-by: Dongliang Mu Acked-by: Peter Chen Signed-off-by: Yinhao Hu Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: core: fix possible concurrent when switch role

2023-04-05T09:16:41Z

commit 451b15ed138ec15bffbebb58a00ebdd884c3e659 upstream. The user may call role_store() when driver is handling ci_handle_id_switch() which is triggerred by otg event or power lost event. Unfortunately, the controller may go into chaos in this case. Fix this by protecting it with mutex lock. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: Acked-by: Peter Chen Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipdea: core: fix return -EINVAL if request role is the same with current role

2023-04-05T09:16:41Z

commit 3670de80678961eda7fa2220883fc77c16868951 upstream. It should not return -EINVAL if the request role is the same with current role, return non-error and without do anything instead. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: Acked-by: Peter Chen Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20230317061516.2451728-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

USB: chipidea: fix interrupt deadlock

2021-11-17T08:48:27Z

commit 9aaa81c3366e8393a62374e3a1c67c69edc07b8a upstream. Chipidea core was calling the interrupt handler from non-IRQ context with interrupts enabled, something which can lead to a deadlock if there's an actual interrupt trying to take a lock that's already held (e.g. the controller lock in udc_irq()). Add a wrapper that can be used to fake interrupts instead of calling the handler directly. Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Fixes: 876d4e1e8298 ("usb: chipidea: core: add wakeup support for extcon") Cc: Peter Chen Cc: stable@vger.kernel.org # 4.4 Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20211021083447.20078-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: add wakeup support for extcon

2020-07-22T07:33:10Z

commit 876d4e1e8298ad1f94d9e9392fc90486755437b4 upstream. If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode. Cc: Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Reported-by: Philippe Schenker Tested-by: Philippe Schenker Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add role switch class support

2019-08-28T02:39:53Z

USB role is fully controlled by usb role switch consumer(e.g. typec), usb port can be at host mode(USB_ROLE_HOST), device mode connected to host(USB_ROLE_DEVICE), or not connecting any partner(USB_ROLE_NONE). Signed-off-by: Li Jun Signed-off-by: Peter Chen

USB: chipidea: convert platform driver to use dev_groups

2019-08-09T05:55:44Z

Platform drivers now have the option to have the platform core create and remove any needed sysfs attribute files. So take advantage of that and do not register "by hand" any sysfs files. Cc: Peter Chen Link: https://lore.kernel.org/r/20190805193636.25560-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usb: Remove dev_err() usage after platform_get_irq()

2019-07-30T18:29:18Z

We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20190730181557.90391-47-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Use dev_err() instead of pr_err()

2019-06-14T09:40:12Z

dev_err() is more appropriate for printing error messages inside drivers, so switch to dev_err(). While at it also add the missing newlines. Signed-off-by: Fabio Estevam Signed-off-by: Peter Chen