kernel.git/drivers/ufs/core, branch linux-6.1.y

scsi: ufs: core: Flush exception handling work when RPM level is zero

2026-03-04T12:20:52Z

[ Upstream commit f8ef441811ec413717f188f63d99182f30f0f08e ] Ensure that the exception event handling work is explicitly flushed during suspend when the runtime power management level is set to UFS_PM_LVL_0. When the RPM level is zero, the device power mode and link state both remain active. Previously, the UFS core driver bypassed flushing exception event handling jobs in this configuration. This created a race condition where the driver could attempt to access the host controller to handle an exception after the system had already entered a deep power-down state, resulting in a system crash. Explicitly flush this work and disable auto BKOPs before the suspend callback proceeds. This guarantees that pending exception tasks complete and prevents illegal hardware access during the power-down sequence. Fixes: 57d104c153d3 ("ufs: add UFS power management support") Signed-off-by: Thomas Yen Cc: Stable Tree Reviewed-by: Peter Wang Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20260129165156.956601-1-thomasyen@google.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Fix EH failure after W-LUN resume error

2026-01-17T15:39:29Z

[ Upstream commit b4bb6daf4ac4d4560044ecdd81e93aa2f6acbb06 ] When a W-LUN resume fails, its parent devices in the SCSI hierarchy, including the scsi_target, may be runtime suspended. Subsequently, the error handler in ufshcd_recover_pm_error() fails to set the W-LUN device back to active because the parent target is not active. This results in the following errors: google-ufshcd 3c2d0000.ufs: ufshcd_err_handler started; HBA state eh_fatal; ... ufs_device_wlun 0:0:0:49488: START_STOP failed for power mode: 1, result 40000 ufs_device_wlun 0:0:0:49488: ufshcd_wl_runtime_resume failed: -5 ... ufs_device_wlun 0:0:0:49488: runtime PM trying to activate child device 0:0:0:49488 but parent (target0:0:0) is not active Address this by: 1. Ensuring the W-LUN's parent scsi_target is runtime resumed before attempting to set the W-LUN to active within ufshcd_recover_pm_error(). 2. Explicitly checking for power.runtime_error on the HBA and W-LUN devices before calling pm_runtime_set_active() to clear the error state. 3. Adding pm_runtime_get_sync(hba->dev) in ufshcd_err_handling_prepare() to ensure the HBA itself is active during error recovery, even if a child device resume failed. These changes ensure the device power states are managed correctly during error recovery. Signed-off-by: Brian Kao Tested-by: Brian Kao Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20251112063214.1195761-1-powenkao@google.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Add ufshcd_update_evt_hist() for UFS suspend error

2026-01-11T14:19:17Z

[ Upstream commit c9f36f04a8a2725172cdf2b5e32363e4addcb14c ] If UFS resume fails, the event history is updated in ufshcd_resume(), but there is no code anywhere to record UFS suspend. Therefore, add code to record UFS suspend error event history. Fixes: dd11376b9f1b ("scsi: ufs: Split the drivers/scsi/ufs directory") Cc: stable@vger.kernel.org Signed-off-by: Seunghwan Baek Reviewed-by: Peter Wang Link: https://patch.msgid.link/20251210063854.1483899-2-sh8267.baek@samsung.com Signed-off-by: Martin K. Petersen [ Adjust context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: ufs: core: fix incorrect buffer duplication in ufshcd_read_string_desc()

2026-01-11T14:18:24Z

[ Upstream commit d794b499f948801f54d67ddbc34a6eac5a6d150a ] The function ufshcd_read_string_desc() was duplicating memory starting from the beginning of struct uc_string_id, which included the length and type fields. As a result, the allocated buffer contained unwanted metadata in addition to the string itself. The correct behavior is to duplicate only the Unicode character array in the structure. Update the code so that only the actual string content is copied into the new buffer. Fixes: 5f57704dbcfe ("scsi: ufs: Use kmemdup in ufshcd_read_string_desc()") Reviewed-by: Avri Altman Reviewed-by: Bart Van Assche Signed-off-by: Bean Huo Link: https://patch.msgid.link/20251107230518.4060231-3-beanhuo@iokpp.de Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Add a quirk to suppress link_startup_again

2025-12-06T21:12:36Z

commit d34caa89a132cd69efc48361d4772251546fdb88 upstream. ufshcd_link_startup() has a facility (link_startup_again) to issue DME_LINKSTARTUP a 2nd time even though the 1st time was successful. Some older hardware benefits from that, however the behaviour is non-standard, and has been found to cause link startup to be unreliable for some Intel Alder Lake based host controllers. Add UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE to suppress link_startup_again, in preparation for setting the quirk for affected controllers. Fixes: 7dc9fb47bc9a ("scsi: ufs: ufs-pci: Add support for Intel ADL") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20251024085918.31825-3-adrian.hunter@intel.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: ufs: core: Initialize value of an attribute returned by uic cmd

2025-12-06T21:12:11Z

[ Upstream commit 6fe4c679dde3075cb481beb3945269bb2ef8b19a ] If ufshcd_send_cmd() fails, *mib_val may have a garbage value. It can get an unintended value of an attribute. Make ufshcd_dme_get_attr() always initialize *mib_val. Fixes: 12b4fdb4f6bc ("[SCSI] ufs: add dme configuration primitives") Signed-off-by: Wonkon Kim Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20251020061539.28661-2-wkon.kim@samsung.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Use link recovery when h8 exit fails during runtime resume

2025-08-15T10:05:07Z

[ Upstream commit 35dabf4503b94a697bababe94678a8bc989c3223 ] If the h8 exit fails during runtime resume process, the runtime thread enters runtime suspend immediately and the error handler operates at the same time. It becomes stuck and cannot be recovered through the error handler. To fix this, use link recovery instead of the error handler. Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths") Signed-off-by: Seunghui Lee Link: https://lore.kernel.org/r/20250717081213.6811-1-sh043.lee@samsung.com Reviewed-by: Bean Huo Acked-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Fix spelling of a sysfs attribute name

2025-07-10T13:59:46Z

[ Upstream commit 021f243627ead17eb6500170256d3d9be787dad8 ] Change "resourse" into "resource" in the name of a sysfs attribute. Fixes: d829fc8a1058 ("scsi: ufs: sysfs: unit descriptor") Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org Reviewed-by: Avri Altman Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: core: ufs: Fix a hang in the error handler

2025-06-27T10:07:21Z

[ Upstream commit 8a3514d348de87a9d5e2ac00fbac4faae0b97996 ] ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because resuming involves submitting a SCSI command and ufshcd_queuecommand() returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has been called instead of before. Backtrace: __switch_to+0x174/0x338 __schedule+0x600/0x9e4 schedule+0x7c/0xe8 schedule_timeout+0xa4/0x1c8 io_schedule_timeout+0x48/0x70 wait_for_common_io+0xa8/0x160 //waiting on START_STOP wait_for_completion_io_timeout+0x10/0x20 blk_execute_rq+0xe4/0x1e4 scsi_execute_cmd+0x108/0x244 ufshcd_set_dev_pwr_mode+0xe8/0x250 __ufshcd_wl_resume+0x94/0x354 ufshcd_wl_runtime_resume+0x3c/0x174 scsi_runtime_resume+0x64/0xa4 rpm_resume+0x15c/0xa1c __pm_runtime_resume+0x4c/0x90 // Runtime resume ongoing ufshcd_err_handler+0x1a0/0xd08 process_one_work+0x174/0x808 worker_thread+0x15c/0x490 kthread+0xf4/0x1ec ret_from_fork+0x10/0x20 Signed-off-by: Sanjeev Yadav [ bvanassche: rewrote patch description ] Fixes: 62694735ca95 ("[SCSI] ufs: Add runtime PM support for UFS host controller driver") Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20250523201409.1676055-1-bvanassche@acm.org Reviewed-by: Peter Wang Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: bsg: Set bsg_queue to NULL after removal

2025-02-21T12:49:59Z

[ Upstream commit 1e95c798d8a7f70965f0f88d4657b682ff0ec75f ] Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access. Signed-off-by: Guixin Liu Link: https://lore.kernel.org/r/20241218014214.64533-3-kanie@linux.alibaba.com Reviewed-by: Avri Altman Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin