kernel.git/drivers/tty/serial/8250, branch linux-6.10.y

serial: 8250: omap: Cleanup on error in request_irq

2024-10-04T14:33:18Z

[ Upstream commit 35e648a16018b747897be2ccc3ce95ff23237bb5 ] If devm_request_irq fails, the code does not cleanup many things that were setup before. Instead of directly returning ret we should jump to err. Fixes: fef4f600319e ("serial: 8250: omap: Fix life cycle issues for interrupt handlers") Signed-off-by: Markus Schneider-Pargmann Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Link: https://lore.kernel.org/r/20240807141227.1093006-4-msp@baylibre.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"

2024-08-29T15:35:34Z

commit 0863bffda1131fd2fa9c05b653ad9ee3d8db127e upstream. This reverts commit 68e6939ea9ec3d6579eadeab16060339cdeaf940. Kevin reported that this causes a crash during suspend on platforms that dont use PM domains. Link: https://lore.kernel.org/r/7ha5hgpchq.fsf@baylibre.com Cc: Thomas Richard Fixes: 68e6939ea9ec ("serial: 8250_omap: Set the console genpd always on if no console suspend") Cc: stable Reported-by: Kevin Hilman Signed-off-by: Griffin Kroah-Hartman Link: https://lore.kernel.org/r/20240814111747.82371-1-griffin@kroah.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_omap: Fix Errata i2310 with RX FIFO level check

2024-07-03T14:10:57Z

Errata i2310[0] says, Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts. Commit 9d141c1e6157 ("serial: 8250_omap: Implementation of Errata i2310") which added the workaround but missed ensuring RX FIFO is really empty before applying the errata workaround as recommended in the errata text. Fix this by adding back check for UART_OMAP_RX_LVL to be 0 for workaround to take effect. [0] https://www.ti.com/lit/pdf/sprz536 page 23 Fixes: 9d141c1e6157 ("serial: 8250_omap: Implementation of Errata i2310") Cc: stable@vger.kernel.org Reported-by: Vignesh Raghavendra Closes: https://lore.kernel.org/all/e96d0c55-0b12-4cbf-9d23-48963543de49@ti.com/ Signed-off-by: Udit Kumar Link: https://lore.kernel.org/r/20240625160725.2102194-1-u-kumar1@ti.com Signed-off-by: Greg Kroah-Hartman

Revert "serial: 8250: Add preferred console in serial8250_isa_init_ports()"

2024-06-25T05:57:55Z

This reverts commit a8b04cfe7dad84e65df5996e14b435fd356fe62c. Let's roll back all of the serial core and printk console changes that went into 6.10-rc1 as there still are problems with them that need to be sorted out. Link: https://lore.kernel.org/r/ZnpRozsdw6zbjqze@tlindgre-MOBL1 Reported-by: Petr Mladek Reported-by: Tony Lindgren Cc: Jiri Slaby Cc: John Ogness Cc: Sergey Senozhatsky Cc: Andy Shevchenko Cc: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman

serial: 8250_omap: Implementation of Errata i2310

2024-06-24T14:12:41Z

As per Errata i2310[0], Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts, therefore apply Errata i2310 solution. [0] https://www.ti.com/lit/pdf/sprz536 page 23 Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") Cc: stable@vger.kernel.org Signed-off-by: Udit Kumar Link: https://lore.kernel.org/r/20240619105903.165434-1-u-kumar1@ti.com Signed-off-by: Greg Kroah-Hartman

tty: serial: 8250: Fix port count mismatch with the device

2024-06-24T14:12:27Z

Normally, the number of ports is indicated by the third digit of the device ID on Moxa PCI serial boards. For example, `0x1121` indicates a device with 2 ports. However, `CP116E_A_A` and `CP116E_A_B` are exceptions; they have 8 ports, but the third digit of the device ID is `6`. This patch introduces a function to retrieve the number of ports on Moxa PCI serial boards, addressing the issue described above. Fixes: 37058fd5d239 ("tty: serial: 8250: Add support for MOXA Mini PCIe boards") Cc: stable Signed-off-by: Crescent Hsieh Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240617063058.18866-1-crescentcy.hsieh@moxa.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level

2024-06-04T12:08:09Z

The FIFO is 64 bytes, but the FCR is configured to fire the TX interrupt when the FIFO is half empty (bit 3 = 0). Thus, we should only write 32 bytes when a TX interrupt occurs. This fixes a problem observed on the PXA168 that dropped a bunch of TX bytes during large transmissions. Fixes: ab28f51c77cd ("serial: rewrite pxa2xx-uart to use 8250_core") Signed-off-by: Doug Brown Link: https://lore.kernel.org/r/20240519191929.122202-1-doug@schmorgal.com Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Revert "Move definitions to the shared header"

2024-06-04T12:07:58Z

This reverts commit d9666dfb314e1ffd6eb9c3c4243fe3e094c047a7. The container of the struct dw8250_port_data is private to the actual driver. In particular, 8250_lpss and 8250_dw use different data types that are assigned to the UART port private_data. Hence, it must not be used outside the specific driver. Fix the mistake made in the past by moving the respective definitions to the specific driver. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240514190730.2787071-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw

2024-06-04T12:07:58Z

The container of the struct dw8250_port_data is private to the actual driver. In particular, 8250_lpss and 8250_dw use different data types that are assigned to the UART port private_data. Hence, it must not be used outside the specific driver. Currently the only cpr_val is required by the common code, make it be available via struct dw8250_port_data. This fixes the UART breakage on Intel Galileo boards. Fixes: 593dea000bc1 ("serial: 8250: dw: Allow to use a fallback CPR value if not synthesized") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240514190730.2787071-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-05-24T15:38:28Z

Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes that missed the 6.9-final merge window, but have been in my tree for weeks (my fault, travel caused me to miss this) These fixes include: - more n_gsm fixes for reported problems - 8520_mtk driver fix - 8250_bcm7271 driver fix - sc16is7xx driver fix All of these have been in linux-next for weeks without any reported problems" * tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler serial: 8250_bcm7271: use default_mux_rate if possible serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup tty: n_gsm: fix missing receive state reset after mode switch tty: n_gsm: fix possible out-of-bounds in gsm0_receive()