kernel.git/drivers/tty/serial/8250, branch linux-4.8.y

serial: 8250_port: fix runtime PM use in __do_stop_tx_rs485()

2016-10-22T10:40:21Z

commit b3965767d86cf4534dfe1affbde0453d3224ed7f upstream. There are calls to serial8250_rpm_{get|put}() in __do_stop_tx_rs485() that are certainly placed in a wrong location. I dunno how it had been tested with runtime PM enabled because it is obvious "sleep in atomic context" error. Besides that serial8250_rpm_get() is called immediately after an IO just happened. It implies that the device is already powered on, see implementation of serial8250_em485_rts_after_send() and serial8250_clear_fifos() for the details. There is no bug have been seen due to, as I can guess, use of auto suspend mode when scheduled transaction to suspend is invoked quite lately than it's needed for a few writes to the port. It might be possible to trigger a warning if stop_tx_timer fires when device is suspended. Refactor the code to use runtime PM only in case of timer function. Fixes: 0c66940d584d ("tty/serial/8250: fix RS485 half-duplex RX") Cc: "Matwey V. Kornilov" Tested-by: Yegor Yefremov Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Check the data->pclk when get apb_pclk

2016-10-22T10:40:21Z

commit e16b46f190a22587898b331f9d58583b0b166c9a upstream. It should check the data->pclk, not data->clk when get apb_pclk. Fixes: c8ed99d4f6a8("serial: 8250_dw: Add support for deferred probing") Signed-off-by: Kefeng Wang Tested-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

serial: 8250: added acces i/o products quad and octal serial cards

2016-08-31T14:28:26Z

Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by: Jimi Damon Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8250_mid: fix divide error bug if baud rate is 0

2016-08-31T13:49:26Z

Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Reported-by: "Mendez Salinas, Fernando" Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

Revert "tty/serial/8250: use mctrl_gpio helpers"

2016-08-31T13:36:01Z

Serial console is broken in v4.8-rcX. Mika and I independently bisected down to commit 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers"). Since neither author nor anyone else didn't propose a solution we better revert it for now. This reverts commit 4ef03d328769eddbfeca1f1c958fdb181a69c341. Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.com Signed-off-by: Andy Shevchenko Tested-by: Heikki Krogerus Tested-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

8250/fintek: rename IRQ_MODE macro

2016-08-18T16:16:13Z

A bugfix for the fintek driver required defining some macros, but one of them clashes with a system header on ARM: drivers/tty/serial/8250/8250_fintek.c:34:0: error: "IRQ_MODE" redefined [-Werror] #define IRQ_MODE 0x70 In file included from /git/arm-soc/arch/arm/include/asm/ptrace.h:13:0, from /git/arm-soc/arch/arm/include/asm/irqflags.h:6, from /git/arm-soc/include/linux/irqflags.h:15, from /git/arm-soc/arch/arm/include/asm/bitops.h:27, from /git/arm-soc/include/linux/bitops.h:36, from /git/arm-soc/include/linux/kernel.h:10, from /git/arm-soc/include/linux/list.h:8, from /git/arm-soc/include/linux/module.h:9, from /git/arm-soc/drivers/tty/serial/8250/8250_fintek.c:11: arch/arm/include/uapi/asm/ptrace.h:55:0: note: this is the location of the previous definition This renames the newly introduced 'IRQ_MODE' macro to FINTEK_IRQ_MODE. Signed-off-by: Arnd Bergmann Fixes: 4da22f1418cb ("serial: 8250_fintek: fix the mismatched IRQ mode") Link: https://patchwork.kernel.org/patch/9200119/ Acked-by: Ji-Ze Hong (Peter Hong) Acked-by: Ricardo Ribalda Delgado Signed-off-by: Greg Kroah-Hartman

serial: 8250_ingenic: drop #if conditional surrounding earlycon code

2016-06-25T21:31:04Z

The #if defined(CONFIG_SERIAL_EARLYCON) && !defined(MODULE) conditional has been added to the OF_EARLYCON_DECLARE() define. The same conditional can be dropped from 8250_ingenic.c because the unused symbols will be marked as __maybe_unsed. Also, the Kconfig dependency can become much simpler. Signed-off-by: Masahiro Yamada Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

serial: 8250_mtk: drop !defined(MODULE) conditional

2016-06-25T21:31:04Z

The !defined(MODULE) conditional has been added to the OF_EARLYCON_DECLARE() define. This commit partially reverts commit 3f5921a60f74 ("serial: 8250/mediatek: fix building with SERIAL_8250=m"). Signed-off-by: Masahiro Yamada Acked-by: Matthias Brugger Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

serial: 8250_uniphier: drop !defined(MODULE) conditional

2016-06-25T21:31:04Z

The !defined(MODULE) conditional has been added to the OF_EARLYCON_DECLARE() define. Now we can revert commit a2d3ea2f2399 ("serial: 8250/uniphier: fix modular build"). Signed-off-by: Masahiro Yamada Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

tty/serial/8250: use mctrl_gpio helpers

2016-06-25T21:30:42Z

This patch permits the usage for GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI signals. Signed-off-by: Yegor Yefremov Signed-off-by: Greg Kroah-Hartman