kernel.git/drivers/tty/hvc/Kconfig, branch linux-4.18.y

Merge tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2018-04-05T01:43:49Z

Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver patches for 4.17-rc1 Not all that big really, most are just small fixes and additions to existing drivers. There's a bunch of work on the imx serial driver recently for some reason, and a new embedded serial driver added as well. Full details are in the shortlog. All of these have been in the linux-next tree for a while with no reported issues" * tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits) serial: expose buf_overrun count through proc interface serial: mvebu-uart: fix tx lost characters tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe() tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP 8250-men-mcb: add support for 16z025 and 16z057 powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused serial: stm32: fix initialization of RS485 mode ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards vt: change SGR 21 to follow the standards serdev: Fix typo in serdev_device_alloc ARM: dts: STi: Fix aliases property name for STi boards tty: st-asc: Update tty alias serial: stm32: add support for RS485 hardware control mode dt-bindings: serial: stm32: add RS485 optional properties selftests: add devpts selftests devpts: comment devpts_mntget() devpts: resolve devpts bind-mounts devpts: hoist out check for DEVPTS_SUPER_MAGIC serial: 8250: Add Nuvoton NPCM UART serial: mxs-auart: disable clks of Alphascale ASM9260 ...

tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers

2018-03-26T13:57:24Z

The blackfin architecture is getting removed, so these drivers are not needed any more. Acked-by: Greg Kroah-Hartman Acked-by: Aaron Wu Signed-off-by: Arnd Bergmann

tty: New RISC-V SBI console driver

2018-03-09T18:19:28Z

The RISC-V ISA defines a simple console that is availiable via SBI calls on all systems. The SBI console is designed to be availiable at all times, so while it's most natural to use this as an early printk target it's also possible to use this as the system console when there isn't a better one availiable. This patch adds support for the RISC-V SBI console via the HVC infastructure. It's entirely independent from our early printk support, which results in early boot messages appearing twice over the SBI console. As far as I can tell that's the fault of our early printk support (we should support earlycon) as opposed to this driver. There is one checkpatch.pl warning here: to check the MAINTAINERS file. They're all matched by the "K: riscv" line. Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman

x86/lguest: Remove lguest support

2017-08-24T07:57:28Z

Lguest seems to be rather unused these days. It has seen only patches ensuring it still builds the last two years and its official state is "Odd Fixes". Remove it in order to be able to clean up the paravirt code. Signed-off-by: Juergen Gross Acked-by: Rusty Russell Acked-by: Thomas Gleixner Cc: Linus Torvalds Cc: Peter Zijlstra Cc: boris.ostrovsky@oracle.com Cc: lguest@lists.ozlabs.org Cc: rusty@rustcorp.com.au Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com Signed-off-by: Ingo Molnar

s390/hvc_iucv: fix broken Kconfig select statement

2017-06-12T14:25:58Z

Select statements in Kconfig do not necessarily enable all required dependencies and can lead to broken configs. This is also the case for the "select IUCV" statement within HVC_IUCV: warning: (HVC_IUCV) selects IUCV which has unmet direct dependencies (NET && S390) Just add the missing "depends on NET" to avoid broken configs. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

ARM64: TTY: hvc_dcc: Add support for ARM64 dcc

2015-10-04T16:49:27Z

Add support for debug communications channel based hvc console for arm64 cpus. Signed-off-by: Abhimanyu Kapur Signed-off-by: Timur Tabi Signed-off-by: Greg Kroah-Hartman

tty/hvc: remove celleb-only beat driver

2015-05-10T17:19:06Z

The beat hvc driver is only used by celleb. celleb has been dropped [1], so drop the drivers. [1] http://patchwork.ozlabs.org/patch/451730/ CC: Greg Kroah-Hartman CC: Jiri Slaby CC: Valentin Rothberg CC: mpe@ellerman.id.au CC: linuxppc-dev@lists.ozlabs.org Signed-off-by: Daniel Axtens Signed-off-by: Greg Kroah-Hartman

tty: Added a CONFIG_TTY option to allow removal of TTY

2013-01-19T00:15:27Z

The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach Reviewed-by: Jamey Sharp Reviewed-by: Josh Triplett Signed-off-by: Greg Kroah-Hartman

tty/serial: remove CONFIG_EXPERIMENTAL dependencies

2012-09-18T15:19:27Z

As discussed at the kernel summit this year, CONFIG_EXPERIMENTAL means nothing, so let's get rid of it. Cc: Kees Cook Cc: Alan Cox Cc: Benjamin Herrenschmidt Cc: Stefano Stabellini Cc: Stephen Rothwell Cc: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman

Merge tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

2012-03-23T03:16:14Z

Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook.