kernel.git/drivers/thunderbolt/tb.h, branch linux-5.4.y

thunderbolt: Make sure device runtime resume completes before taking domain lock

2019-06-12T10:30:46Z

When a device is authorized from userspace by writing to authorized attribute we first take the domain lock and then runtime resume the device in question. There are two issues with this. First is that the device connected notifications are blocked during this time which means we get them only after the authorization operation is complete. Because of this the authorization needed flag from the firmware notification is not reflecting the real authorization status anymore. So what happens is that the "authorized" keeps returning 0 even if the device was already authorized properly. Second issue is that each time the controller is runtime resumed the connection_id field of device connected notification may be different than in the previous resume. We need to use the latest connection_id otherwise the firmware rejects the authorization command. Fix these by moving runtime resume operations to happen before the domain lock is taken, and waiting for the updated device connected notification from the firmware before we allow runtime resume of a device to complete. While there add missing locking to tb_switch_nvm_read(). Fixes: 09f11b6c99fe ("thunderbolt: Take domain lock in switch sysfs attribute callbacks") Reported-by: Pengfei Xu Signed-off-by: Mika Westerberg

thunderbolt: Make priority unsigned in struct tb_path

2019-04-25T09:18:27Z

Clang warns: drivers/thunderbolt/tunnel.c:504:17: warning: implicit truncation from 'int' to bit-field changes value from 5 to -3 [-Wbitfield-constant-conversion] path->priority = 5; ^ ~ 1 warning generated. The priority member in struct tb_path is only ever assigned a positive number: $ rg -n priority drivers/thunderbolt/path.c drivers/thunderbolt/tunnel.c:99: path->priority = 3; drivers/thunderbolt/tunnel.c:308: path->priority = 2; drivers/thunderbolt/tunnel.c:323: path->priority = 1; drivers/thunderbolt/tunnel.c:504: path->priority = 5; Furthermore, that value is only assigned to an unsigned integer in tb_path_activate (the priority member in struct tb_regs_hop). Fixes: 44242d6c9703 ("thunderbolt: Add support for DMA tunnels") Link: https://github.com/ClangBuiltLinux/linux/issues/454 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Mika Westerberg

thunderbolt: Make __TB_[SW|PORT]_PRINT take const parameters

2019-04-18T08:18:53Z

The printing macros do not modify the passed object so make them const. While there make tb_route() to take const parameter as well. Signed-off-by: Mika Westerberg

thunderbolt: Add support for DMA tunnels

2019-04-18T08:18:53Z

In addition to PCIe and Display Port tunnels it is also possible to create tunnels that forward DMA traffic from the host interface adapter (NHI) to a NULL port that is connected to another domain through a Thunderbolt cable. These tunnels can be used to carry software messages such as networking packets. To support this we introduce another tunnel type (TB_TUNNEL_DMA) that supports paths from NHI to NULL port and back. Signed-off-by: Mika Westerberg

thunderbolt: Run tb_xdp_handle_request() in system workqueue

2019-04-18T08:18:53Z

We run all XDomain requests during discovery in tb->wq and since it only runs one work at the time it means that sending back reply to the other domain may be delayed too much depending whether there is an active XDomain discovery request running. To make sure we can send reply to the other domain as soon as possible run tb_xdp_handle_request() in system workqueue instead. Since the device can be hot-removed in the middle we need to make sure the domain structure is still around when the function is run so increase reference count before we schedule the reply work. Signed-off-by: Mika Westerberg

thunderbolt: Add support for Display Port tunnels

2019-04-18T08:18:53Z

Display Port tunnels are somewhat more complex than PCIe tunnels as it requires 3 tunnels (AUX Rx/Tx and Video). In addition we are not supposed to create the tunnels immediately when a DP OUT is enumerated. Instead we need to wait until we get hotplug event to that adapter port or check if the port has HPD set before tunnels can be established. This adds Display Port tunneling support to the software connection manager. Signed-off-by: Mika Westerberg

thunderbolt: Generalize port finding routines to support all port types

2019-04-18T08:18:53Z

We will be needing these routines to find Display Port adapters as well so modify them to take port type as the second parameter. Signed-off-by: Mika Westerberg

thunderbolt: Scan only valid NULL adapter ports in hotplug

2019-04-18T08:18:53Z

The only way to expand Thunderbolt topology is through the NULL adapter ports (typically ports 1, 2, 3 and 4). There is no point handling Thunderbolt hotplug events on any other port. Add a helper function (tb_port_is_null()) that can be used to determine if the port is NULL port, and use it in software connection manager code when hotplug event is handled. Signed-off-by: Mika Westerberg

thunderbolt: Add support for full PCIe daisy chains

2019-04-18T08:18:53Z

Currently the software connection manager (tb.c) has only supported creating a single PCIe tunnel, no PCIe device daisy chaining has been supported so far. This updates the software connection manager so that it now can create PCIe tunnels for full chain of six devices. Because PCIe allows DMA and opens possibility for DMA attacks we change security level to "user" meaning that PCIe tunneling requires that the userspace authorizes the devices first. This makes it possible to block PCIe tunneling completely while still allowing other types of tunnels to be automatically created. Signed-off-by: Mika Westerberg

thunderbolt: Discover preboot PCIe paths the boot firmware established

2019-04-18T08:18:53Z

In Apple Macs the boot firmware (EFI) connects all devices automatically when the system is started, before it hands over to the OS. Instead of ignoring we discover all those PCIe tunnels and record them using our internal structures, just like we do when a device is connected after the OS is already up. By doing this we can properly tear down tunnels when devices are disconnected. Also this allows us to resume the existing tunnels after system suspend/resume cycle. Signed-off-by: Mika Westerberg