kernel.git/drivers/thermal/samsung, branch linux-4.5.y

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

2015-11-11T17:03:01Z

Pull thermal updates from Zhang Rui: - Implement generic devfreq cooling mechanism through frequency reduction for devices using devfreq. From Ørjan Eide and Javi Merino. - Introduce OMAP3 support on TI SoC thermal driver. From Pavel Mack and Eduardo Valentin. - A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and Rockchip thermal drivers. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits) thermal: exynos: Directly return 0 instead of using local ret variable thermal: exynos: Remove unneeded semicolon thermal: exynos: Use IS_ERR() because regulator cannot be NULL thermal: exynos: Fix first temperature read after registering sensor thermal: exynos: Fix unbalanced regulator disable on probe failure devfreq_cooling: return on allocation failure thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r dt-bindings: rockchip-thermal: Add the pinctrl states in this document thermal: devfreq_cooling: Make power a u64 thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister thermal: underflow bug in imx_set_trip_temp() thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula thermal: imx: register irq handler later in probe thermal: rockhip: fix setting thermal shutdown polarity thermal: rockchip: fix handling of invalid readings devfreq_cooling: add trace information thermal: Add devfreq cooling PM / OPP: get the voltage for all OPPs tools/thermal: tmon: use pkg-config also for CFLAGS linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS ...

thermal: exynos: Directly return 0 instead of using local ret variable

2015-11-04T19:10:39Z

The 'ret' variable in exynos5440_tmu_initialize() is initialized to 0 and returned as is. Replace it with direct return statement. This also fixes coccinelle warning: drivers/thermal/samsung/exynos_tmu.c:611:5-8: Unneeded variable: "ret". Return "0" on line 654 Reviewed-by: Alim Akhtar Acked-by: Lukasz Majewski Tested-by: Lukasz Majewski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Eduardo Valentin

thermal: exynos: Remove unneeded semicolon

2015-11-04T19:10:09Z

Remove semicolons after switch statement. Acked-by: Lukasz Majewski Tested-by: Lukasz Majewski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Eduardo Valentin

thermal: exynos: Use IS_ERR() because regulator cannot be NULL

2015-11-04T19:09:39Z

The NULL check in probe's error path is not needed because in that time the regulator cannot be NULL (regulator_get() returns valid pointer or ERR_PTR). Reviewed-by: Alim Akhtar Acked-by: Lukasz Majewski Tested-by: Lukasz Majewski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Eduardo Valentin

thermal: exynos: Fix first temperature read after registering sensor

2015-11-04T19:08:30Z

Thermal core could not read the temperature after registering the thermal sensor with thermal_zone_of_sensor_register() because the driver was not yet initialized. The call trace looked like: exynos_tmu_probe() thermal_zone_of_sensor_register() of_thermal_set_mode() thermal_zone_device_update() exynos_get_temp() if (!data->tmu_read) return -EINVAL; exynos_map_dt_data() data->tmu_read = ... This produced an error in dmesg: thermal thermal_zone0: failed to read out thermal zone (-22) Register the thermal_zone_device later, after parsing Device Tree and enabling necessary clocks, but before calling exynos_tmu_initialize() which uses the registered thermal_zone_device. Reviewed-by: Alim Akhtar Tested-by: Alim Akhtar Acked-by: Lukasz Majewski Tested-by: Lukasz Majewski Signed-off-by: Krzysztof Kozlowski Fixes: 3b6a1a805f34 ("thermal: samsung: core: Exynos TMU rework to use device tree for configuration") Signed-off-by: Eduardo Valentin

thermal: exynos: Fix unbalanced regulator disable on probe failure

2015-11-04T19:07:51Z

During probe if the regulator could not be enabled, the error exit path would still disable it. This could lead to unbalanced counter of regulator enable/disable. The patch moves code for getting and enabling the regulator from exynos_map_dt_data() to probe function because it is really not a part of getting Device Tree properties. Acked-by: Lukasz Majewski Tested-by: Lukasz Majewski Reviewed-by: Alim Akhtar Signed-off-by: Krzysztof Kozlowski Fixes: 5f09a5cbd14a ("thermal: exynos: Disable the regulator on probe failure") Cc: Signed-off-by: Eduardo Valentin

thermal: exynos: Fix register read in TMU

2015-10-16T23:08:56Z

The value of emul_con was getting overwritten if the selected soc is SOC_ARCH_EXYNOS5260. And so as a result we were reading from the wrong register in the case of SOC_ARCH_EXYNOS5260. Fixes: 488c7455d74c ("thermal: exynos: Add the support for Exynos5433 TMU") Signed-off-by: Sudip Mukherjee Reviewed-by: Krzysztof Kozlowski Reviewed-by: Chanwoo Choi Acked-by: Lukasz Majewski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim

Merge branches 'thermal-core' and 'thermal-intel' of .git into next

2015-09-02T02:08:02Z

thermal: consistently use int for temperatures

2015-08-03T15:15:50Z

The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer Acked-by: Geert Uytterhoeven Reviewed-by: Jean Delvare Reviewed-by: Lukasz Majewski Reviewed-by: Darren Hart Reviewed-by: Heiko Stuebner Reviewed-by: Peter Feuerer Cc: Punit Agrawal Cc: Zhang Rui Cc: Eduardo Valentin Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare Cc: Peter Feuerer Cc: Heiko Stuebner Cc: Lukasz Majewski Cc: Stephen Warren Cc: Thierry Reding Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck Cc: Rafael J. Wysocki Cc: Maxime Ripard Cc: Darren Hart Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui

thermal: exynos: Remove unused code related to platform_data on probe()

2015-08-03T02:36:57Z

This patch removes the unused code related to struct exynos_tmu_platform_data because exynos_tmu_probe() don't handle the struct exynos_tmu_platform_data *pdata. Test HW: Exynos4412 - Trats2 board Cc: Zhang Rui Cc: Eduardo Valentin Cc: Lukasz Majewski Signed-off-by: Chanwoo Choi Signed-off-by: Lukasz Majewski Tested-by: Lukasz Majewski Signed-off-by: Eduardo Valentin