kernel.git/drivers/thermal/Kconfig, branch linux-3.17.y

Merge branches 'exynos-fix', 'for-rc', 'int3403-fix', 'misc', 'rcar-thermal' and 'sti-thermal' of .git into next

2014-07-22T02:13:00Z

thermal: allow building dove_thermal with mvebu

2014-07-15T14:25:11Z

DT-enabled Dove has moved from ARCH_DOVE in mach-dove to MACH_DOVE in mach-mvebu. As non-DT ARCH_DOVE will stay to rot for a while, add a new DT-only MACH_DOVE to thermal Kconfig. This was originally supposed to go in via "ARM: dove: prepare new Dove DT Kconfig" patch from Sebastian Hesselbarth for 3.15, but slipped through the cracks. I've tested on CuBox that without this patch you can't compile dove_thermal into a mach-mvebu based kernel, and with this patch I can build the driver and it works as expected run-time. v2: non-ascii char creeped in somehow Signed-off-by: Riku Voipio Cc: Sebastian Hesselbarth Cc: Zhang Rui Cc: Eduardo Valentin Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Sebastian Hesselbarth Signed-off-by: Zhang Rui

thermal: sti: Introduce ST Thermal core code

2014-07-15T14:01:22Z

This core is shared by both ST's 'memory mapped' and 'system configuration register' based Thermal controllers. Signed-off-by: Ajit Pal Singh Signed-off-by: Lee Jones Acked-by: Pavel Machek Signed-off-by: Zhang Rui

Merge branches 'armada-375-380-soc-support', 'eduardo-thermal-soc-fixes', 'intel-soc-dts-thermal' and 'thermal-soc-fixes' of .git into next

2014-05-15T09:18:02Z

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc-fixes

2014-05-15T08:41:34Z

thermal: Intel SoC DTS thermal

2014-05-15T08:37:24Z

In the Intel SoCs like Bay Trail, there are 2 additional digital temperature sensors(DTS), in addition to the standard DTSs in the core. Also they support 4 programmable thresholds, out of which two can be used by OSPM. These thresholds can be used by OSPM thermal control. Out of these two thresholds, one is used by driver and one user mode can change via thermal sysfs to get notifications on threshold violations. The driver defines one critical trip points, which is set to TJ MAX - offset. The offset can be changed via module parameter (default 5C). Also it uses one of the thresholds to get notification for this temperature violation. This is very important for orderly shutdown as the many of these devices don't have ACPI thermal zone, and expects that there is some other thermal control mechanism present in OSPM. When a Linux distro is used without additional specialized thermal control program, BIOS can do force shutdown when thermals are not under control. When temperature reaches critical, the Linux thermal core will initiate an orderly shutdown. Signed-off-by: Srinivas Pandruvada Signed-off-by: Zhang Rui

thermal: offer Samsung thermal support only when ARCH_EXYNOS is defined

2014-05-06T18:51:32Z

Menu for Samsung thermal support is visible on all Samsung platforms while thermal drivers are currently available only for EXYNOS SoCs. Fix it by replacing PLAT_SAMSUNG dependency with ARCH_EXYNOS one. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kyungmin Park Acked-by: Amit Daniel Kachhap Signed-off-by: Eduardo Valentin

Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-04-05T22:37:40Z

Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...

thermal,rcar_thermal: Add dependency on HAS_IOMEM

2014-03-03T15:15:02Z

Commit beeb5a1e (thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST) broke build on archs wihout io memory. On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/thermal/rcar_thermal.c:404: undefined reference to `devm_ioremap_resource' drivers/thermal/rcar_thermal.c:426: undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger Acked-by: Laurent Pinchart Acked-by: Kuninori Morimoto Signed-off-by: Zhang Rui

Thermal: update INT3404 thermal driver help text

2014-03-03T15:12:49Z

Signed-off-by: Zhang Rui