kernel.git/drivers/target/target_core_iblock.c, branch linux-5.6.y

scsi: target/iblock: fix WRITE SAME zeroing

2020-05-06T06:16:46Z

commit 1d2ff149b263c9325875726a7804a0c75ef7112e upstream. SBC4 specifies that WRITE SAME requests with the UNMAP bit set to zero "shall perform the specified write operation to each LBA specified by the command". Commit 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") modified the iblock backend to call blkdev_issue_zeroout() when handling WRITE SAME requests with UNMAP=0 and a zero data segment. The iblock blkdev_issue_zeroout() call incorrectly provides a flags parameter of 0 (bool false), instead of BLKDEV_ZERO_NOUNMAP. The bool false parameter reflects the blkdev_issue_zeroout() API prior to commit ee472d835c26 ("block: add a flags argument to (__)blkdev_issue_zeroout") which was merged shortly before 2237498f0b5c. Link: https://lore.kernel.org/r/20200419163109.11689-1-ddiss@suse.de Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Reviewed-by: Bart Van Assche Signed-off-by: David Disseldorp Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target/iblock: Fix protection error with blocks greater than 512B

2019-12-19T23:50:34Z

The sector size of the block layer is 512 bytes, but integrity interval size might be different (in case of 4K block size of the media). At the initiator side the virtual start sector is the one that was originally submitted by the block layer (512 bytes) for the Reftag usage. The initiator converts the Reftag to integrity interval units and sends it to the target. So the target virtual start sector should be calculated at integrity interval units. prepare_fn() and complete_fn() don't remap correctly the Reftag when using incorrect units of the virtual start sector, which leads to the following protection error at the device: "blk_update_request: protection error, dev sdb, sector 2048 op 0x0:(READ) flags 0x10000 phys_seg 1 prio class 0" To fix that, set the seed in integrity interval units. Link: https://lore.kernel.org/r/1576078562-15240-1-git-send-email-israelr@mellanox.com Signed-off-by: Israel Rukshin Reviewed-by: Max Gurtovoy Reviewed-by: Sagi Grimberg Signed-off-by: Martin K. Petersen

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-07-06T16:56:20Z

Pull SCSI fixes from James Bottomley: "Two iscsi fixes. One for an oops in the client which can be triggered by the server authentication protocol and the other in the target code which causes data corruption" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported scsi: target/iblock: Fix overrun in WRITE SAME emulation

scsi: target/iblock: Fix overrun in WRITE SAME emulation

2019-07-02T20:35:52Z

WRITE SAME corrupts data on the block device behind iblock if the command is emulated. The emulation code issues (M - 1) * N times more bios than requested, where M is the number of 512 blocks per real block size and N is the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a device with 4k blocks, 7 * N more LBAs gets written after the requested range. The issue happens because the number of 512 byte sectors to be written is decreased one by one while the real bios are typically from 1 to 8 512 byte sectors per bio. Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Cc: Signed-off-by: Roman Bolshakov Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman

scsi: target/core: Use the SECTOR_SHIFT constant

2018-10-16T05:13:35Z

Instead of duplicating the SECTOR_SHIFT definition from , use it. This patch does not change any functionality. Reviewed-by: Christoph Hellwig Cc: Nicholas Bellinger Cc: Mike Christie Cc: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: target: iblock: split T10 PI SGL across command bios

2018-09-21T02:27:00Z

When T10 PI is enabled on a backing device for the iblock backstore, the PI SGL for the entire command is attached to the first bio only. This works fine if the command is covered by a single bio, but can result in ref tag errors in the client for the other bios in a multi-bio command, e.g. [ 47.631236] sda: ref tag error at location 2048 (rcvd 0) [ 47.637658] sda: ref tag error at location 4096 (rcvd 0) [ 47.644228] sda: ref tag error at location 6144 (rcvd 0) The command will be split into multiple bios if the number of data SG elements exceeds BIO_MAX_PAGES (see iblock_get_bio()). The bios may later be split again in the block layer on the host after iblock_submit_bios(), depending on the queue limits of the backing device. The block and SCSI layers will pass through the whole PI SGL down to the LLDD however that first bio is split up, but the LLDD may only use the portion that corresponds to the data length (depends on the LLDD, tested with scsi_debug). Split the PI SGL across the bios in the command, so each bio's bio_integrity_payload contains the protection information for the data in the bio. Use an sg_mapping_iter to keep track of where we are in PI SGL, so we know where to start with the next bio. Signed-off-by: Greg Edwards Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen

target: convert to bioset_init()/mempool_init()

2018-05-30T21:33:32Z

Convert the target code to embedded bio sets. Reviewed-by: Christoph Hellwig Signed-off-by: Kent Overstreet Signed-off-by: Jens Axboe

block: Use bioset_init() for fs_bio_set

2018-05-14T19:16:06Z

Minor optimization - remove a pointer indirection when using fs_bio_set. Signed-off-by: Kent Overstreet Signed-off-by: Jens Axboe

scsi: target: Fix fortify_panic kernel exception

2018-04-20T23:24:01Z

memcmp() requires the two buffers passed as arguments to be at least 'size' bytes long, otherwise a fortify_panic will trigger. Use memchr_inv() instead of memcmp() to determine whether the received payload is zeroed or not. The bug was found by running a block backstore via LIO. [ 496.212958] Call Trace: [ 496.212960] [c0000007e58e3800] [c000000000cbbefc] fortify_panic+0x24/0x38 (unreliable) [ 496.212965] [c0000007e58e3860] [d00000000f150c28] iblock_execute_write_same+0x3b8/0x3c0 [target_core_iblock] [ 496.212976] [c0000007e58e3910] [d000000006c737d4] __target_execute_cmd+0x54/0x150 [target_core_mod] [ 496.212982] [c0000007e58e3940] [d000000006d32ce4] ibmvscsis_write_pending+0x74/0xe0 [ibmvscsis] [ 496.212991] [c0000007e58e39b0] [d000000006c74fc8] transport_generic_new_cmd+0x318/0x370 [target_core_mod] [ 496.213001] [c0000007e58e3a30] [d000000006c75084] transport_handle_cdb_direct+0x64/0xd0 [target_core_mod] [ 496.213011] [c0000007e58e3aa0] [d000000006c75298] target_submit_cmd_map_sgls+0x1a8/0x320 [target_core_mod] [ 496.213021] [c0000007e58e3b30] [d000000006c75458] target_submit_cmd+0x48/0x60 [target_core_mod] [ 496.213026] [c0000007e58e3bd0] [d000000006d34c20] ibmvscsis_scheduler+0x370/0x600 [ibmvscsis] [ 496.213031] [c0000007e58e3c90] [c00000000013135c] process_one_work+0x1ec/0x580 [ 496.213035] [c0000007e58e3d20] [c000000000131798] worker_thread+0xa8/0x600 [ 496.213039] [c0000007e58e3dc0] [c00000000013a468] kthread+0x168/0x1b0 [ 496.213044] [c0000007e58e3e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4 [mkp: tweaked commit message] Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Signed-off-by: Bryant G. Ly Reviewed-by: Steven Royer Tested-by: Taylor Jakobson Cc: Christoph Hellwig Cc: Nicholas Bellinger Cc: # v4.13+ Signed-off-by: Martin K. Petersen