kernel.git/drivers/target/target_core_iblock.c, branch linux-3.13.y

target: Pass through I/O topology for block backstores

2013-11-12T21:44:54Z

In addition to block size (already implemented), passing through alignment offset, logical-to-phys block exponent, I/O granularity and optimal I/O length will allow initiators to properly handle layout on LUNs with 4K block sizes. Tested with various weird values via scsi_debug module. One thing to look at with this patch is the new block limits values -- instead of granularity 1 optimal 8192, Lio will now be returning whatever the block device says, which may affect performance. Signed-off-by: Andy Grover Acked-by: Martin K. Petersen Signed-off-by: Nicholas Bellinger

target: Update copyright ownership/year information to 2013

2013-09-11T03:23:36Z

Update copyright ownership/year information for target-core, loopback, iscsi-target, tcm_qla2xx, vhost and iser-target. Signed-off-by: Nicholas Bellinger

target: Allow sbc_ops->execute_rw() to accept SGLs + data_direction

2013-09-09T21:29:28Z

COMPARE_AND_WRITE expects to be able to send down a DMA_FROM_DEVICE to obtain the necessary READ payload for comparision against the first half of the WRITE payload containing the verify user data. Currently virtual backends expect to internally reference SGLs, SGL nents, and data_direction, so change IBLOCK, FILEIO and RD sbc_ops->execute_rw() to accept this values as function parameters. Also add default sbc_execute_rw() handler for the typical case for cmd->execute_rw() submission using cmd->t_data_sg, cmd->t_data_nents, and cmd->data_direction). v2 Changes: - Add SCF_COMPARE_AND_WRITE command flag - Use sbc_execute_rw() for normal cmd->execute_rw() submission with expected se_cmd members. Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Martin Petersen Cc: Chris Mason Cc: James Bottomley Cc: Nicholas Bellinger Signed-off-by: Nicholas Bellinger

target: replace strict_strto() with kstrto()

2013-08-13T03:31:44Z

The usage of strict_strtoul() and strict_strtoull() is not preferred, because strict_strtoul() and strict_strtoull() are obsolete. Thus, kstrtoul() and kstrtoull() should be used. v2: Fix incorrect return in ft_add_tpg (Fengguang) Signed-off-by: Jingoo Han Signed-off-by: Nicholas Bellinger

target/iblock: Fix WCE=1 + DPOFUA=1 backend WRITE regression

2013-05-15T08:46:34Z

This patch fixes a regression bug introduced in v3.9-rc1 where if the underlying struct block_device for a IBLOCK backend is configured with WCE=1 + DPOFUA=1 settings, the rw = WRITE assignment no longer occurs in iblock_execute_rw(), and rw = 0 is passed to iblock_submit_bios() in effect causing a READ bio operation to occur. The offending commit is: commit d0c8b259f8970d39354c1966853363345d401330 Author: Nicholas Bellinger Date: Tue Jan 29 22:10:06 2013 -0800 target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status Note the WCE=1 + DPOFUA=0, WCE=0 + DPOFUA=1, and WCE=0 + DPOFUA=0 cases are not affected by this regression bug. Reported-by: Chris Boot Tested-by: Chris Boot Reported-by: Hannes Reinecke Cc: Signed-off-by: Nicholas Bellinger

target: Add sbc_execute_unmap() helper

2013-04-25T08:05:24Z

iblock_execute_unmap() and fd_execute_unmap share a lot of code. Add sbc_execute_unmap() helper to remove duplicated code for iblock_execute_unmap() and fd_execute_unmap(). Cc: Christoph Hellwig Cc: Martin K. Petersen Cc: Nicholas Bellinger Signed-off-by: Asias He Signed-off-by: Nicholas Bellinger

target/iblock: Add iblock_do_unmap() helper

2013-04-25T08:05:24Z

Add helper iblock_do_unmap() to remove duplicated code in iblock_execute_write_same_unmap() and iblock_execute_unmap(). Cc: Christoph Hellwig Cc: Martin K. Petersen Cc: Nicholas Bellinger Signed-off-by: Asias He Signed-off-by: Nicholas Bellinger

target: Add __exit annotation for module_exit functions

2013-02-28T03:12:10Z

Inclues sbp_exit, fileio_module_exit, iblock_module_exit and pscsi_module_exit. Note: rd_module_exit() can not be annotated by __exit, becasue it is called by target_core_init_configfs() which is annotated by __init. Signed-off-by: Asias He Signed-off-by: Nicholas Bellinger

target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectors

2013-02-23T20:46:14Z

Trivial, but WRITE SAME is an SBC command so it seems strange for a related function (defined in target_core_sbc.c) to be in the spc_ namespace. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger

target: Fix error checking for UNMAP commands

2013-02-13T20:16:05Z

SBC-3 (revision 35) says: The PARAMETER LIST LENGTH field specifies the length in bytes of the UNMAP parameter list that is available to be transferred from the Data-Out Buffer. If the parameter list length is greater than zero and less than 0008h (i.e., eight), then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to PARAMETER LIST LENGTH ERROR. A PARAMETER LIST LENGTH set to zero specifies that no data shall be sent. so our sense code for too-short descriptors was wrong, and we were incorrectly failing commands that didn't transfer any descriptors. While we're at it, also handle the UNMAP check: If the ANCHOR bit is set to one, and the ANC_SUP bit in the Logical Block Provisioning VPD page (see 6.6.4) is set to zero, then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD IN CDB. (chris boot: Fix wrong cut+paste comment in transport_send_check_condition_and_sense) Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger