kernel.git/drivers/ssb/main.c, branch linux-2.6.33.y

ssb: Fix CONFIG_SSB_SDIOHOST typo

2010-02-03T21:55:20Z

This fixes a CONFIG_SSB_SDIOHOST typo. Signed-off-by: Michael Buesch Reported-by: Christoph Egger Tested-By: Albert Herranz Signed-off-by: John W. Linville

ssb: Fix SPROM writing

2009-11-23T22:05:41Z

The SPROM writing routines were broken since we rewrote the suspend handling on wireless devices, because SPROM writing depended on suspend. This patch changes it and freezes devices with the driver remove(), probe() callbacks instead. This also simplifies the whole logics a lot. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville

ssb: Implement SDIO host bus support

2009-09-09T15:19:00Z

Add support for communicating with a Sonics Silicon Backplane through a SDIO interface, as found in the Nintendo Wii WLAN daughter card. The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with a SDIO host interface. Signed-off-by: Albert Herranz Signed-off-by: Michael Buesch Signed-off-by: John W. Linville

ssb: Fail ssb modinit, if attach of the buses failed.

2009-09-08T20:31:08Z

SSB modinit should not succeed, if busattach failed. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville

ssb: struct device - replace bus_id with dev_name(), dev_set_name()

2008-11-21T16:06:03Z

This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. CC: Michael Buesch Acked-by: Greg Kroah-Hartman Signed-Off-By: Kay Sievers Signed-off-by: John W. Linville

[SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices

2008-09-27T14:45:37Z

For SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using coherent_dma_mask so that calls to dma_set_mask() succeed. It fixes the regression on the b44 driver introduced by commit f225763a7d6c92c4932dbd528437997078496fcc Signed-off-by: Aurelien Jarno Signed-off-by: Ralf Baechle

ssb: allow compilation on systems without PCI

2008-08-18T15:05:13Z

Makes ssb work on system without a PCI bus. Signed-off-by: Holger Schurig Signed-off-by: Michael Buesch Signed-off-by: John W. Linville

ssb, b43, b43legacy, b44: Rewrite SSB DMA API

2008-06-27T13:09:15Z

This is a rewrite of the DMA API for SSB devices. This is needed, because the old (non-existing) "API" made too many bad assumptions on the API of the host-bus (PCI). This introduces an almost complete SSB-DMA-API that maps to the lowlevel bus-API based on the bustype. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville

ssb: Fix coherent DMA mask for PCI devices

2008-06-13T20:14:52Z

This fixes setting the coherent DMA mask for PCI devices. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

2008-04-18T06:56:30Z