kernel.git/drivers/ssb/driver_mipscore.c, branch linux-3.8.y

ssb: extif: fix compile errors

2012-11-30T18:38:14Z

If CONFIG_SSB_EMBEDDED or CONFIG_SSB_DRIVER_MIPS is set and CONFIG_SSB_DRIVER_EXTIF is not set, it will cause compile problems because of missing functions. This patch fixes these problems. The mips driver now also uses ssb_chipco_available() instead of checking bus->chipco.dev manually. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville

ssb: add attribute to indicate a parallel flash is available

2012-10-19T19:52:48Z

Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville

ssb: move parallel flash config into an own struct

2012-10-19T19:52:44Z

This is a preparing step for adding serial flash support. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville

ssb: check for flash presentence

2012-08-10T19:27:02Z

We can not assume parallel flash is always present, there are boards with *serial* flash and probably some without flash at all. Define some bits by the way. Signed-off-by: Rafał Miłecki Reviewed-by: Hauke Mehrtens Signed-off-by: John W. Linville

ssb: add support for bcm5354

2012-02-06T19:55:36Z

This patch adds support the the BCM5354 SoC. It has a PMU and a constant not configurable clock. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville

Update my e-mail address

2011-07-07T13:18:01Z

Signed-off-by: Michael Buesch Signed-off-by: Jiri Kosina

ssb: fix interrupt assignment

2010-02-08T21:50:54Z

Explicitely enable shared interrupt 2 for any core that didn't get a dedicated IRQ anymore (fallthrough case) and for EXTIF cores to make gpio interrupts work. Also remove a bogus comment. Signed-off-by: Jochen Friedrich Signed-off-by: John W. Linville

MIPS: BC47xx: Fix SSB irq setup

2009-07-03T14:45:27Z

The current ssb irq setup in ssb_mipscore_init has the problem that it configures some device on some irq without checking that the irq is not taken by an other device. For example in my case PCI host is on irq 0 and IPSEC on irq 3. The current code: - store in dev->irq that IPSEC irq is 3 + 2 - do a set_irq 0->3 on PCI host But now IPSEC irq is not routed anymore to the mips code and dev->irq is wrong. This causes a problem described in [1]. This patch tries to solve the problem by making set_irq configure the device we want to take the irq on the shared irq0. The previous example becomes: - store in dev->irq that IPSEC irq is 3 + 2 - do a set_irq 0->3 on PCI host: - irq 3 is already taken by IPSEC. do a set_irq 3->0 on IPSEC I also added some code to print the irq configuration after irq setup to allow easier debugging. And I add extra checking in ssb_mips_irq to report device without irq or device with not routed irq. [1] http://www.danm.de/files/src/bcm5365p/REPORTED_DEVICES Signed-off-by: Matthieu CASTET Acked-by : Michael Buesch Tested-by: Florian Fainelli Signed-off-by: Ralf Baechle

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

2008-04-14T09:30:23Z

Conflicts: drivers/net/ehea/ehea_main.c drivers/net/wireless/iwlwifi/Kconfig drivers/net/wireless/rt2x00/rt61pci.c net/ipv4/inet_timewait_sock.c net/ipv6/raw.c net/mac80211/ieee80211_sta.c

ssb-mipscore: Fix interrupt vectors

2008-04-09T14:33:49Z

This fixes assignment of the interrupt vectors on the SSB MIPS core. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville