Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-3.8.y 2012-12-06T14:05:54Z 2012-12-06T14:05:54Z Bastian Hecht 2012-11-07T11:40:05Z urn:sha1:746aeffdd97263d8356870a5dfbbdb5f927378e2 The MSIOF hardware block is used in the SH Mobile series as well, so we add it here. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2012-12-06T14:02:53Z Wolfram Sang 2012-12-04T05:42:28Z urn:sha1:266904c77911fdc0a064d97e2f06034b824c23ac This driver is obsolete and can't even be built anymore since the platform it depends has been removed. The STMP series is completely covered by the MXS platform these days, so spi-mxs can be used instead. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2012-12-06T13:58:31Z Grant Likely 2012-12-06T13:58:31Z urn:sha1:a34fc82e234255b657e62c3ce0c12e9439a59e80 Pull in the changes Mark has queued up for SPI 2012-12-05T23:14:38Z Alexander Shiyan 2012-11-07T17:30:29Z urn:sha1:161b96c383c442f4d7dabbb8500a5fbd551b344d This patch add new driver for CLPS711X SPI master controller. Due to platform limitations driver supports only 8 bit transfer mode. Chip select control is handled via GPIO. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2012-11-14T02:04:53Z Laxman Dewangan 2012-11-14T00:24:47Z urn:sha1:8528547bcc33622176a27963dc8a2513d116b832 NVIDIA's Tegra20 have the SPI (SFLASH) controller to interface with spi flash device which is used for system boot. Add the spi driver for this controller. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 2012-10-30T18:38:35Z Laxman Dewangan 2012-10-30T07:04:05Z urn:sha1:dc4dc36056392c0b0b1ca9e81bebff964b9297e0 Tegra20/Tegra30 supports the spi interface through its SLINK controller. Add spi driver for SLINK controller. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 2012-10-10T02:10:41Z Linus Torvalds 2012-10-10T02:10:41Z urn:sha1:b7e97d22113bcaafff93774e3085f5b567eaba9c Pull slave-dmaengine updates from Vinod Koul: "This time we have Andy updates on dw_dmac which is attempting to make this IP block available as PCI and platform device though not fully complete this time. We also have TI EDMA moving the dma driver to use dmaengine APIs, also have a new driver for mmp-tdma, along with bunch of small updates. Now for your excitement the merge is little unusual here, while merging the auto merge on linux-next picks wrong choice for pl330 (drivers/dma/pl330.c) and this causes build failure. The correct resolution is in linux-next. (DMA: PL330: Fix build error) I didn't back merge your tree this time as you are better than me so no point in doing that for me :)" Fixed the pl330 conflict as in linux-next, along with trivial header file conflicts due to changed includes. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) dma: tegra: fix interrupt name issue with apb dma. dw_dmac: fix a regression in dwc_prep_dma_memcpy dw_dmac: introduce software emulation of LLP transfers dw_dmac: autoconfigure data_width or get it via platform data dw_dmac: autoconfigure block_size or use platform data dw_dmac: get number of channels from hardware if possible dw_dmac: fill optional encoded parameters in register structure dw_dmac: mark dwc_dump_chan_regs as inline DMA: PL330: return ENOMEM instead of 0 from pl330_alloc_chan_resources DMA: PL330: Remove redundant runtime_suspend/resume functions DMA: PL330: Remove controller clock enable/disable dmaengine: use kmem_cache_zalloc instead of kmem_cache_alloc/memset DMA: PL330: Set the capability of pdm0 and pdm1 as DMA_PRIVATE ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE dma: tegra: use list_move_tail instead of list_del/list_add_tail mxs/dma: Enlarge the CCW descriptor area to 4 pages dw_dmac: utilize slave_id to pass request line dmaengine: mmp_tdma: add dt support dmaengine: mmp-pdma support spi: davici - make davinci select edma ... 2012-10-09T07:08:04Z Linus Torvalds 2012-10-09T07:08:04Z urn:sha1:de390bba797aa9a554bc1769b6a8771605854d79 Pull MIPS update from Ralf Baechle: "This is the MIPS update for 3.7. A fair chunk of them are platform updates to the Cavium Octeon SOC (which involves machine generated header files of considerable size), Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx platforms. Support for the commercial MIPS simulator MIPSsim has been removed as MIPS Technologies is shifting away from this product and Qemu is offering various more powerful platforms. The generic MIPS code can now also probe for no-execute / write-only TLB features implemented without the full SmartMIPS extension as permitted by the latest MIPS processor architecture. Lots of small changes to generic code." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits) MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x MIPS: BCM63XX: Properly handle mac address octet overflow MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user. MIPS: Replace `-' in defconfig filename wth `_' for consistency. MIPS: Wire kcmp syscall. MIPS: MIPSsim: Remove the MIPSsim platform. MIPS: NOTIFY_RESUME is not needed in TIF masks MIPS: Merge the identical "return from syscall" per-ABI code MIPS: Unobfuscate _TIF..._MASK MIPS: Prevent hitting do_notify_resume() with !user_mode(regs). MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'. MIPS: Add base architecture support for RI and XI. MIPS: Optimise TLB handlers for MIPS32/64 R2 cores. MIPS: uasm: Add INS and EXT instructions. MIPS: Avoid pipeline stalls on some MIPS32R2 cores. MIPS: Make VPE count to be one-based. MIPS: Add new end of interrupt functionality for GIC. MIPS: Add EIC support for GIC. MIPS: Code clean-ups for the GIC. ... 2012-10-01T12:29:49Z Stephen Warren 2012-09-28T16:15:48Z urn:sha1:536a53a300d0d40152796eefb0a9e6e36ca37f7d The current SPI driver has many issues. Examples are: * Segfaulting on most transfers due to expecting all transfers to have both RX and TX buffers. * Hanging on TX transfers since the whole driver flow is driven by RX DMA completion, but the HW is only told to enable RX for RX transfers. * Use of clk_disable_unprepare() from atomic context. * Once those and other minor issues are fixed, the driver still doesn't actually work. * The driver also implements a deprecated API to the SPI core. For this reason, simply remove the driver completely. This has two advantages: 1) This will remove the last use of Tegra's <mach/dma.h>, which will allow that file to be removed, which is required for single zImage work. 2) The downstream driver is significaly different from the current code. I believe a patch to re-add the downstream driver (with appropriate cleanup) will be much simpler to review if it's a new file rather than randomly interspered with essentially unrelated existing code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 2012-09-28T13:05:29Z Mark Brown 2012-09-28T13:05:29Z urn:sha1:f4b81dd83e38277a3d1e6661f0fa8eea8cfe784b