kernel.git/drivers/soundwire/stream.c, branch linux-5.17.y

ASoC/SoundWire: dai: expand 'stream' concept beyond SoundWire

2021-12-24T14:06:47Z

The HDAudio ASoC support relies on the set_tdm_slots() helper to store the HDaudio stream tag in the tx_mask. This only works because of the pre-existing order in soc-pcm.c, where the hw_params() is handled for codec_dais *before* cpu_dais. When the order is reversed, the stream_tag is used as a mask in the codec fixup functions: /* fixup params based on TDM slot masks */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && codec_dai->tx_mask) soc_pcm_codec_params_fixup(&codec_params, codec_dai->tx_mask); As a result of this confusion, the codec_params_fixup() ends-up generating bad channel masks, depending on what stream_tag was allocated. We could add a flag to state that the tx_mask is really not a mask, but it would be quite ugly to persist in overloading concepts. Instead, this patch suggests a more generic get/set 'stream' API based on the existing model for SoundWire. We can expand the concept to store 'stream' opaque information that is specific to different DAI types. In the case of HDAudio DAIs, we only need to store a stream tag as an unsigned char pointer. The TDM rx_ and tx_masks should really only be used to store masks. Rename get_sdw_stream/set_sdw_stream callbacks and helpers as get_stream/set_stream. No functionality change beyond the rename. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Ranjani Sridharan Signed-off-by: Bard Liao Acked-By: Vinod Koul Link: https://lore.kernel.org/r/20211224021034.26635-5-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown

soundwire: stream: don't program mockup device ports

2021-08-02T05:38:22Z

Mockup devices don't take part in command/control operations and their virtual ports shall not be programmed. Signed-off-by: Bard Liao Reviewed-by: Rander Wang Link: https://lore.kernel.org/r/20210714032209.11284-9-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA

2021-08-02T05:38:22Z

This change is needed for support of mockup devices, which by construction will not provide any answer to a bank switch, but it's also legit for regular cases. If for some reason a device loses sync and cannot handle a bank switch, we should go ahead anyways. The devices can always resync later. The only case where the error flow should be used is when there is a Command_Aborted composite answer from SoundWire devices. Signed-off-by: Bard Liao Reviewed-by: Rander Wang Link: https://lore.kernel.org/r/20210714032209.11284-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: stream: Fix test for DP prepare complete

2021-06-20T11:16:18Z

In sdw_prep_deprep_slave_ports(), after the wait_for_completion() the DP prepare status register is read. If this indicates that the port is now prepared, the code should continue with the port setup. It is irrelevant whether the wait_for_completion() timed out if the port is now ready. The previous implementation would always fail if the wait_for_completion() timed out, even if the port was reporting successful prepare. This patch also fixes a minor bug where the return from sdw_read() was not checked for error - any error code with LSBits clear could be misinterpreted as a successful port prepare. Fixes: 79df15b7d37c ("soundwire: Add helpers for ports operations") Signed-off-by: Richard Fitzgerald Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20210618144745.30629-1-rf@opensource.cirrus.com Signed-off-by: Vinod Koul

soundwire: stream: fix memory leak in stream config error path

2021-04-06T04:51:35Z

When stream config is failed, master runtime will release all slave runtime in the slave_rt_list, but slave runtime is not added to the list at this time. This patch frees slave runtime in the config error path to fix the memory leak. Fixes: 89e590535f32 ("soundwire: Add support for SoundWire stream management") Signed-off-by: Rander Wang Reviewed-by: Keyon Jie Reviewed-by: Guennadi Liakhovetski Reviewed-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210331004610.12242-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: stream: remove useless bus initializations

2021-03-30T06:21:44Z

There is no need to assign a pointer to NULL if it's only used in a loop and assigned within that loop. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Rander Wang Reviewed-by: Kai Vehmanen Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210302091122.13952-12-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: stream: remove useless initialization

2021-03-30T06:21:44Z

Cppcheck complains about possible null pointer dereferences, but it's more like there are unnecessary initializations before walking through a list. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Rander Wang Reviewed-by: Kai Vehmanen Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210302091122.13952-11-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: stream: add missing \n in dev_err()

2021-03-23T06:49:53Z

We fixed a lot of warnings in 2019 but the magic of copy-paste keeps adding new ones... Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210323005855.20890-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

Merge tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

2020-10-01T20:59:55Z

Vinod writes: soundwire updates for 5.10-rc1 This round of update includes: - Generic bandwidth allocation algorithm from Intel folks - PM support for Intel chipsets - Updates to Intel drivers which makes sdw usable on latest laptops - Support for MMIO SDW controllers found in QC chipsets - Update to subsystem to use helpers in bitfield.h to manage register bits * tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits) soundwire: sysfs: add slave status and device number before probe soundwire: bus: add enumerated Slave device to device list soundwire: remove an unnecessary NULL check soundwire: cadence: add data port test fail interrupt soundwire: intel: enable test modes soundwire: enable Data Port test modes soundwire: intel: use {u32|u16}p_replace_bits soundwire: cadence: use u32p_replace_bits soundwire: qcom: get max rows and cols info from compatible soundwire: qcom: add support to block packing mode soundwire: qcom: clear BIT FIELDs before value set. soundwire: Add generic bandwidth allocation algorithm soundwire: cadence: add parity error injection through debugfs soundwire: bus: export broadcast read/write capability for tests ASoC: codecs: realtek-soundwire: ignore initial PARITY errors soundwire: bus: use quirk to filter out invalid parity errors soundwire: slave: add first_interrupt_done status soundwire: bus: filter-out unwanted interrupt reports ASoC/soundwire: bus: use property to set interrupt masks soundwire: qcom: fix SLIBMUS/SLIMBUS typo ...

soundwire: enable Data Port test modes

2020-09-23T09:59:29Z

Test modes are required for all SoundWire IP, and help debug integration issues. In theory each port can be configured with a different mode but to simplify this patch only offers separate configurations for the Master and Slave ports - this covers 99% of the intended cases during platform integration. The test mode value is set via platform-specific ways. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Rander Wang Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20200920193207.31241-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul