kernel.git/drivers/soc/xilinx, branch linux-5.11.yHosts the 0x221E linux distro kernel.
https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-5.11.y2020-12-09T18:36:33Zsoc: xilinx: vcu: use vcu-settings syscon registers2020-12-09T18:36:33ZMichael Tretter2020-11-09T13:48:17Zurn:sha1:30b79eb1f92ed5974885d374a4107c94e2dd3e03
Switch the "logicoreip" registers to the new xlnx,vcu-settings binding
to be able to read the settings if the settings are specified in a
separate device tree node that is shared with other drivers.
If the driver is not able to find a node with the new binding, fall back
to check for the logicore register bank to be backwards compatible.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Link: https://lore.kernel.org/r/20201109134818.4159342-4-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
soc: xilinx: vcu: drop useless success message2020-12-09T18:36:33ZMichael Tretter2020-11-09T13:48:15Zurn:sha1:853e69d6c87c463563eb33e060d0ab6566b1452b
The message that the driver was successfully probed only adds useless
noise. Drop the message.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Link: https://lore.kernel.org/r/20201109134818.4159342-2-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
soc: xilinx: Fix error code in zynqmp_pm_probe()2020-06-18T08:07:17ZDan Carpenter2020-06-05T11:00:20Zurn:sha1:a6f2f0fdc73aacc6e10ae48ae78634dba26702d4
This should be returning PTR_ERR() but it returns IS_ERR() instead.
Fixes: ffdbae28d9d1 ("drivers: soc: xilinx: Use mailbox IPI callback")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20200605110020.GA978434@mwanda
firmware: xilinx: Remove eemi ops for set_requirement2020-04-28T13:45:09ZRajan Vaja2020-04-24T20:58:00Zurn:sha1:cbbbda71fe37fe70e610d5ec3977fc6a096280ed
Use direct function call instead of using eemi ops for
set_requirement.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-19-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: xilinx: Remove eemi ops for release_node2020-04-28T13:45:09ZRajan Vaja2020-04-24T20:57:59Zurn:sha1:07fb1a4619fcb35f79d0adc13c8678f7726337ef
Use direct function call instead of using eemi ops for release_node.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-18-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: xilinx: Remove eemi ops for request_node2020-04-28T13:45:09ZRajan Vaja2020-04-24T20:57:58Zurn:sha1:bf8b27ed2324b5108439593dcfb9ab264a745ee7
Use direct function call instead of using eemi ops for request_node.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-17-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: xilinx: Remove eemi ops for set_suspend_mode2020-04-28T13:45:08ZRajan Vaja2020-04-24T20:57:57Zurn:sha1:951d0a97e41caff96c180ca416093276bfd9a4fd
Use direct function call instead of eemi ops for set_suspend_mode.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-16-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: xilinx: Remove eemi ops for init_finalize2020-04-28T13:45:08ZRajan Vaja2020-04-24T20:57:56Zurn:sha1:9474da950d1e39f71cbfeaba87367fa146635a88
Use direct function call instead of eemi ops for init_finalize.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-15-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: xilinx: Remove eemi ops for get_api_version2020-04-28T13:38:38ZRajan Vaja2020-04-24T20:57:43Zurn:sha1:b9b3a8be28b31a3dbcb0ced07aa0d869f45cdb69
Use direct function calls instead of using eemi ops. So remove
eemi ops for get_api_version and use direct function call.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-2-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers: soc: xilinx: fix firmware driver Kconfig dependency2020-04-15T06:15:55ZArnd Bergmann2020-04-08T15:52:15Zurn:sha1:d0384eedcde21276ac51f57c641f875605024b32
The firmware driver is optional, but the power driver depends on it,
which needs to be reflected in Kconfig to avoid link errors:
aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'
The firmware driver can probably be allowed for compile-testing as
well, so it's best to drop the dependency on the ZYNQ platform
here and allow building as long as the firmware code is built-in.
Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200408155224.2070880-1-arnd@arndb.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>