kernel.git/drivers/soc/tegra/pmc.c, branch linux-5.14.y

soc/tegra: Fix an error handling path in tegra_powergate_power_up()

2021-11-17T10:04:24Z

[ Upstream commit 986b5094708e508baa452a23ffe809870934a7df ] If an error occurs after a successful tegra_powergate_enable_clocks() call, it must be undone by a tegra_powergate_disable_clocks() call, as already done in the below and above error handling paths of this function. Update the 'goto' to branch at the correct place of the error handling path. Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support") Signed-off-by: Christophe JAILLET Reviewed-by: Jon Hunter Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

Merge tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-07-10T16:22:44Z

Pull ARM SoC updates from Olof Johansson: "A few SoC (code) changes have queued up this cycle, mostly for minor changes and some refactoring and cleanup of legacy platforms. This branch also contains a few of the fixes that weren't sent in by the end of the release (all fairly minor). - Adding an additional maintainer for the TEE subsystem (Sumit Garg) - Quite a significant modernization of the IXP4xx platforms by Linus Walleij, revisiting with a new PCI host driver/binding, removing legacy mach/* include dependencies and moving platform detection/config to drivers/soc. Also some updates/cleanup of platform data. - Core power domain support for Tegra platforms, and some improvements in build test coverage by adding stubs for compile test targets. - A handful of updates to i.MX platforms, adding legacy (non-PSCI) SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform data and board fixups for iMX6/7. ... and a few smaller changes and fixes for Samsung, OMAP, Allwinner, Rockchip" * tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits) MAINTAINERS: Add myself as TEE subsystem reviewer ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device" hw_random: ixp4xx: Add OF support hw_random: ixp4xx: Add DT bindings hw_random: ixp4xx: Turn into a module hw_random: ixp4xx: Use SPDX license tag hw_random: ixp4xx: enable compile-testing pata: ixp4xx: split platform data to its own header soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h PCI: ixp4xx: Add a new driver for IXP4xx PCI: ixp4xx: Add device tree bindings for IXP4xx ARM/ixp4xx: Make NEED_MACH_IO_H optional ARM/ixp4xx: Move the virtual IObases MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree ARM: debug: add UART early console support for MSTAR SoCs ARM: dts: ux500: Fix LED probing ARM: imx: add smp support for imx7d ARM: imx6q: drop of_platform_default_populate() from init_machine arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory soc/tegra: fuse: Fix Tegra234-only builds ...

soc/tegra: pmc: Add driver state syncing

2021-06-02T08:58:55Z

Add driver state syncing that is invoked once all PMC consumers are attached and ready. The consumers are the power domain clients. The synchronization callback is invoked once all client drivers are probed, the driver core handles this for us. This callback informs PMC driver that all voltage votes are initialized by each PD client and it's safe to begin voltage scaling of the core power domain. Signed-off-by: Dmitry Osipenko Reviewed-by: Ulf Hansson [treding@nvidia.com: squash DT backwards-compatibility patch] Signed-off-by: Thierry Reding

soc/tegra: pmc: Add core power domain

2021-06-02T08:58:42Z

NVIDIA Tegra SoCs have multiple power domains, each domain corresponds to an external SoC power rail. Core power domain covers vast majority of hardware blocks within a Tegra SoC. The voltage of a power domain should be set to a level which satisfies all devices within the power domain. Add support for the core power domain which controls voltage state of the domain. This allows us to support system-wide DVFS on Tegra20-210 SoCs. The PMC powergate domains now are sub-domains of the core domain, this requires device-tree updating, older DTBs are unaffected and will continue to work as before. Tested-by: Peter Geis # Ouya T30 Tested-by: Paul Fertser # PAZ00 T20 Tested-by: Nicolas Chauvet # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar # Ouya T30 Signed-off-by: Dmitry Osipenko Reviewed-by: Ulf Hansson [treding@nvidia.com: squash lockdep class removal patch] Signed-off-by: Thierry Reding

clk: tegra: Add stubs needed for compile-testing

2021-06-01T11:37:40Z

Add stubs needed for compile-testing of Tegra memory drivers. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

Merge tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2021-04-30T20:04:30Z

Pull pin control updates from Linus Walleij: "There is a lot going on! Core changes: - A semantic change to handle pinmux and pinconf in explicit order while up until now we depended on the semantic order in the device tree. The device tree is a functional programming language and does not imply any order, so the right thing is for the pin control core to provide these semantics. - Add a new pinmux-select debugfs file which makes it possible to go in and select functions for a pin manually (iteratively, at the prompt) for debugging purposes. - Fixes to gpio regmap handling for a new pin control driver making use of regmap-gpio. - Use octal permissions on debugfs files. New drivers: - A massive rewrite of the former custom pin control driver for MIPS Broadcom devices to instead use the pin control subsystem. New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368, BCM63268 and BCM6318 SoC variants are implemented. - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are supported. - Support for the Rockchip RK3568/RK3566 pin controller. - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000. - Support for Mediatek MTK8195. - Add a new Xilinx ZynqMP pin control driver. Driver improvements and non-urgent fixes: - Modularization and improvements of the Rockchip drivers. - Some new pins added to the description of new Renesas SoCs. - Clarifications of the GPIO base calculation in the Intel driver. - Fix the function names for the MPP54 and MPP55 pins in the Armada CP110 pin controller. - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350. - Support for ACPI probing of the Qualcomm SC8180x. - Fix interrupt clear status on rockchip - Fix some missing pins on the Ingenic JZ4770, some semantic fixes for the behaviour of the Ingenic pin controller. Add DMIC pins for JZ4780, X1000, X1500 and X1830. - A slew of janitorial like of_node_put() calls" * tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: Add Xilinx ZynqMP pinctrl driver support firmware: xilinx: Add pinctrl support pinctrl: rockchip: do coding style for mux route struct pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param pinctrl: Introduce MODE group in enum pin_config_param pinctrl: Keep enum pin_config_param ordered by name dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver pinctrl: core: Fix kernel doc string for pin_get_name() pinctrl: mediatek: use spin lock in mtk_rmw pinctrl: add drive for I2C related pins on MT8195 pinctrl: add pinctrl driver on mt8195 dt-bindings: pinctrl: mt8195: add pinctrl file and binding document pinctrl: Ingenic: Add pinctrl driver for X2000. pinctrl: Ingenic: Add pinctrl driver for JZ4775. pinctrl: Ingenic: Add pinctrl driver for JZ4755. pinctrl: Ingenic: Add pinctrl driver for JZ4750. pinctrl: Ingenic: Add pinctrl driver for JZ4730. dt-bindings: pinctrl: Add bindings for new Ingenic SoCs. pinctrl: Ingenic: Reformat the code. pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs. ...

pinctrl: Introduce MODE group in enum pin_config_param

2021-04-22T00:03:01Z

Better to have a MODE group of settings to keep them together when ordered alphabetically. Hence, rename PIN_CONFIG_LOW_POWER_MODE to PIN_CONFIG_MODE_LOW_POWER. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210412140741.39946-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij

soc/tegra: pmc: Print out domain name when reset fails to acquire

2021-03-26T12:10:25Z

Print out domain name when reset fails to acquire for debugging purposes and to make formatting of GENPD errors consistent in the driver. Tested-by: Peter Geis # Ouya T30 Tested-by: Nicolas Chauvet # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar # Ouya T30 Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

soc/tegra: pmc: Ensure that clock rates aren't too high

2021-03-26T12:10:25Z

Switch all clocks of a power domain to a safe rate which is suitable for all possible voltages in order to ensure that hardware constraints aren't violated when power domain state toggles. Tested-by: Peter Geis # Ouya T30 Tested-by: Nicolas Chauvet # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar # Ouya T30 Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

soc/tegra: pmc: Fix completion of power-gate toggling

2021-03-26T12:10:25Z

The SW-initiated power gate toggling is dropped by PMC if there is contention with a HW-initiated toggling, i.e. when one of CPU cores is gated by cpuidle driver. Software should retry the toggling after 10 microseconds on Tegra20/30 SoCs, hence add the retrying. On Tegra114+ the toggling method was changed in hardware, the TOGGLE_START bit indicates whether PMC is busy or could accept the command to toggle, hence handle that bit properly. The problem pops up after enabling dynamic power gating of 3D hardware, where 3D power domain fails to turn on/off "randomly". The programming sequence and quirks are documented in TRMs, but PMC driver obliviously re-used the Tegra20 logic for Tegra30+, which strikes back now. The 10 microseconds and other timeouts aren't documented in TRM, they are taken from downstream kernel. Link: https://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=commit;h=311dd1c318b70e93bcefec15456a10ff2b9eb0ff Link: https://nv-tegra.nvidia.com/gitweb/?p=linux-3.10.git;a=commit;h=7f36693c47cb23730a6b2822e0975be65fb0c51d Tested-by: Peter Geis # Ouya T30 Tested-by: Nicolas Chauvet # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar # Ouya T30 Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding