kernel.git/drivers/soc/qcom/Kconfig, branch linux-4.18.y

qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependency

2018-06-26T04:54:38Z

Without CONFIG_OF_RESERVED_MEM, gcc sees that the global cmd_db_header variable is never initialized, and through code optimization concludes that a lot of other code cannot possibly work after that: drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_addr': drivers/soc/qcom/cmd-db.c:197:21: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le32_to_cpu(ent.addr); drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data': drivers/soc/qcom/cmd-db.c:224:10: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] ent_len = le16_to_cpu(ent.len); drivers/soc/qcom/cmd-db.c:115:6: error: 'rsc_hdr.data_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 offset = le16_to_cpu(hdr->data_offset); ^~~~~~ drivers/soc/qcom/cmd-db.c:116:6: error: 'ent.offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 loffset = le16_to_cpu(ent->offset); ^~~~~~~ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data_len': drivers/soc/qcom/cmd-db.c:250:38: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le16_to_cpu(ent.len); ^ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_slave_id': drivers/soc/qcom/cmd-db.c:272:7: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] Using a hard CONFIG_OF_RESERVED_MEM dependency avoids this warning, and we can remove the CONFIG_OF dependency. Signed-off-by: Arnd Bergmann Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2018-06-12T01:19:45Z

Pull ARM SoC late updates from Olof Johansson: "This is a branch with a few merge requests that either came in late, or took a while longer for us to review and merge than usual and thus cut it a bit close to the merge window. We stage them in a separate branch and if things look good, we still send them up -- and that's the case here. This is mostly DT additions for Renesas platforms, adding IP block descriptions for existing and new SoCs. There are also some driver updates for Qualcomm platforms for SMEM/QMI and GENI, which is their generalized serial protocol interface" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits) soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver arm64: dts: renesas: salvator-common: Add ADV7482 support ARM: dts: r8a7740: Add CEU1 ARM: dts: r8a7740: Add CEU0 arm64: dts: renesas: salvator-common: enable VIN arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7795-es1: add CSI-2 node ...

drivers: qcom: add command DB driver

2018-05-25T20:53:52Z

Command DB is a simple database in the shared memory of QCOM SoCs, that provides information regarding shared resources. Some shared resources in the SoC have properties that are probed dynamically at boot by the remote processor. The information pertaining to the SoC and the platform are made available in the shared memory. Drivers can query this information using predefined strings. Signed-off-by: Mahesh Sivasubramanian Signed-off-by: Lina Iyer Reviewed-by: Bjorn Andersson Reviewed-by: Stephen Boyd Signed-off-by: Andy Gross

soc: qcom: Add APR bus driver

2018-05-11T03:13:26Z

This patch adds support to APR bus (Asynchronous Packet Router) driver. APR driver is made as a bus driver so that the apr devices can added removed more dynamically depending on the state of the services on the dsp. APR is used for communication between application processor and QDSP to use services on QDSP like Audio and others. Signed-off-by: Srinivas Kandagatla Reviewed-and-tested-by: Rohit kumar Acked-by: Andy Gross Reviewed-by: Bjorn Andersson Signed-off-by: Mark Brown

soc: qcom: Add GENI based QUP Wrapper driver

2018-04-25T05:12:05Z

This driver manages the Generic Interface (GENI) firmware based Qualcomm Universal Peripheral (QUP) Wrapper. GENI based QUP is the next generation programmable module composed of multiple Serial Engines (SE) and supports a wide range of serial interfaces like UART, SPI, I2C, I3C, etc. This driver also enables managing the serial interface independent aspects of Serial Engines. Signed-off-by: Karthikeyan Ramasubramanian Signed-off-by: Sagar Dharia Signed-off-by: Girish Mahadevan Reviewed-by: Evan Green Signed-off-by: Andy Gross

Merge tag 'rproc-v4.17' of git://github.com/andersson/remoteproc

2018-04-10T19:09:27Z

Pull remoteproc updates from Bjorn Andersson: - add support for generating coredumps for remoteprocs using devcoredump - add the Qualcomm sysmon driver for intra-remoteproc crash handling - a number of fixes in Qualcomm and IMX drivers * tag 'rproc-v4.17' of git://github.com/andersson/remoteproc: remoteproc: fix null pointer dereference on glink only platforms soc: qcom: qmi: add CONFIG_NET dependency remoteproc: imx_rproc: Slightly simplify code in 'imx_rproc_probe()' remoteproc: imx_rproc: Re-use existing error handling path in 'imx_rproc_probe()' remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()' samples: Introduce Qualcomm QMI sample client remoteproc: qcom: Introduce sysmon remoteproc: Pass type of shutdown to subdev remove remoteproc: qcom: Register segments for core dump soc: qcom: mdt-loader: Return relocation base remoteproc: Rename "load_rsc_table" to "parse_fw" remoteproc: Add remote processor coredump support remoteproc: Remove null character write of shared mem

soc: qcom: qmi: add CONFIG_NET dependency

2018-03-27T20:43:29Z

Access to the socket API and the root network namespace is only available when networking is enabled: ERROR: "kernel_sendmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "sock_release" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "sock_create_kern" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "kernel_getsockname" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "init_net" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "kernel_recvmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined! Adding a dependency on CONFIG_NET lets us build it in all randconfig builds. Fixes: 9b8a11e82615 ("soc: qcom: Introduce QMI encoder/decoder") Acked-by: Andy Gross Signed-off-by: Arnd Bergmann Signed-off-by: Bjorn Andersson

soc: qcom: rmtfs-mem: Add support for assigning memory to remote

2018-03-09T00:40:24Z

On some platform the remote processor's memory map is not statically configured in TrustZone, so each memory region that is to be accessed by the remote needs a call into TrustZone to set up the remote's permissions. Implement this for the rmtfs memory driver, to give the modem on 8996 access to the shared file system buffers. Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross

soc: qcom: Introduce QMI encoder/decoder

2017-12-20T21:38:34Z

Add the helper library for encoding and decoding QMI encoded messages. The implementation is taken from lib/qmi_encdec.c of the Qualcomm kernel (msm-3.18). Modifications has been made to the public API, source buffers has been made const and the debug-logging part was omitted, for now. Acked-by: Chris Lew Tested-by: Chris Lew Tested-by: Srinivas Kandagatla Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross

soc: qcom: smp2p: Access APCS as mailbox client

2017-12-20T21:38:34Z

Attempt to acquire the APCS IPC through the mailbox framework and fall back to the old syscon based approach, to allow us to move away from using the syscon. Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross