kernel.git/drivers/soc/fsl/qe, branch linux-4.9.y

soc: fsl: qe: Check of ioremap return value

2022-03-08T18:00:58Z

[ Upstream commit a222fd8541394b36b13c89d1698d9530afd59a9c ] As the possible failure of the ioremap(), the par_io could be NULL. Therefore it should be better to check it and return error in order to guarantee the success of the initiation. But, I also notice that all the caller like mpc85xx_qe_par_io_init() in `arch/powerpc/platforms/85xx/common.c` don't check the return value of the par_io_init(). Actually, par_io_init() needs to check to handle the potential error. I will submit another patch to fix that. Anyway, par_io_init() itsely should be fixed. Fixes: 7aa1aa6ecec2 ("QE: Move QE from arch/powerpc to drivers/soc") Signed-off-by: Jiasheng Jiang Signed-off-by: Li Yang Signed-off-by: Sasha Levin

soc/fsl/qe: Fix an error code in qe_pin_request()

2020-01-29T09:24:20Z

[ Upstream commit 5674a92ca4b7e5a6a19231edd10298d30324cd27 ] We forgot to set "err" on this error path. Fixes: 1a2d397a6eb5 ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()") Signed-off-by: Dan Carpenter Signed-off-by: Li Yang Signed-off-by: Sasha Levin

soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift()

2018-11-10T15:42:42Z

[ Upstream commit 96fc74333f84cfdf8d434c6c07254e215e2aad00 ] There is a copy and paste bug so we accidentally use the RX_ shift when we're in TX_ mode. Fixes: bb8b2062aff3 ("fsl/qe: setup clock source for TDM mode") Signed-off-by: Dan Carpenter Signed-off-by: Zhao Qiang Signed-off-by: Li Yang (cherry picked from commit 3cb31b634052ed458922e0c8e2b4b093d7fb60b9) Signed-off-by: Olof Johansson Signed-off-by: Sasha Levin

soc/fsl/qe: round brg_freq to 1kHz granularity

2018-03-24T10:00:19Z

[ Upstream commit 2ccf80b7566cc035d903dd0ac5d7ebd25c2c1060 ] Because of integer computation rounding in u-boot (that sets the QE brg-frequency DTS prop), the clk value is 99999999 Hz even though it is 100 MHz. When setting brg clks that are exact divisors of 100 MHz, this small differnce plays a role and can result in lower clks to be output (for instance 20 MHz - divide by 5 - results in 16.666 MHz - divide by 6). This patch fixes that by "forcing" the brg_clk to the nearest kHz when the difference is below 2 integer rounding errors (i.e. 4). Signed-off-by: Valentin Longchamp Signed-off-by: Scott Wood Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

soc/fsl/qe: fix gpio save_regs functions

2016-09-25T07:38:56Z

of_mm_gpiochip_add_data() calls mm_gc->save_regs() before setting the data. Therefore ->save_regs() cannot use gpiochip_get_data() An Oops is encountered without this fix. fixes: 1e714e54b5ca5 ("powerpc: qe_lib-gpio: use gpiochip data pointer") Signed-off-by: Christophe Leroy Cc: Reviewed-by: Linus Walleij Signed-off-by: Scott Wood

soc/fsl/qe: fix Oops on CPM1 (and likely CPM2)

2016-09-25T07:38:52Z

Commit 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram") has changed the way muram is managed. genalloc uses kmalloc(), hence requires the SLAB to be up and running. On powerpc 8xx, cpm_reset() is called early during startup. cpm_reset() then calls cpm_muram_init() before SLAB is available, hence the following Oops. cpm_reset() cannot be called during initcalls because the CPM is needed for console. This patch removes the call to cpm_muram_init() from cpm_reset(). cpm_muram_init() will be called from a new function called cpm_init() which is declared as subsys_initcall, unless cpm_muram_alloc() is called earlier for the serial console in which case cpm_muram_init() will be called from there. The reason for calling it from two places is that some drivers (e.g. i2c-cpm) need some of the initialisations done by cpm_muram_init() but don't call cpm_muram_alloc(). The console driver calls cpm_muram_alloc() but some platforms might not use the CPM serial ports for console. [ 0.000000] Unable to handle kernel paging request for data at address 0x00000008 [ 0.000000] Faulting instruction address: 0xc01acce0 [ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.000000] PREEMPT CMPC885 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5 [ 0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000 [ 0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000 [ 0.000000] REGS: c0537e50 TRAP: 0300 Not tainted (4.4.14-s3k-dev-g0886ed8-svn) [ 0.000000] MSR: 00001032 CR: 28044428 XER: 00000000 [ 0.000000] DAR: 00000008 DSISR: c0000000 GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8 GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000 GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001 [ 0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc [ 0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c [ 0.000000] Call Trace: [ 0.000000] [c0537f00] [00000200] 0x200 (unreliable) [ 0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c [ 0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8 [ 0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30 [ 0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168 [ 0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380 [ 0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98 [ 0.000000] Instruction dump: [ 0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6 [ 0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f [ 0.000000] ---[ end trace dc8fa200cb88537f ]--- fixes: 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram") Cc: stable@vger.linux.org Signed-off-by: Christophe Leroy [scottwood: Removed some string changes unrelated to bugfix] Signed-off-by: Scott Wood

fsl/qe: use of_property_read_bool

2016-09-25T07:38:51Z

Use of_property_read_bool to check for the existence of a property. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression e1,e2; statement S2,S1; @@ - if (of_get_property(e1,e2,NULL)) + if (of_property_read_bool(e1,e2)) S1 else S2 // Signed-off-by: Julia Lawall Signed-off-by: Scott Wood

soc/fsl/qe: Use of_adress_to_resource() in get_qe_base()

2016-09-25T04:01:17Z

modify get_qe_base function with of_address_to_resource instead of of_get_property and of_translate_address. Signed-off-by: Zhao Qiang Signed-off-by: Scott Wood

soc/fsl/qe: Use resource_size

2016-09-25T03:46:55Z

Use the function resource_size instead of explicit computation. Problem found using Coccinelle. Signed-off-by: Vaishali Thakkar Signed-off-by: Scott Wood

fsl/qe: Add QE TDM lib

2016-06-07T22:56:31Z

QE has module to support TDM, some other protocols supported by QE are based on TDM. add a qe-tdm lib, this lib provides functions to the protocols using TDM to configurate QE-TDM. Signed-off-by: Zhao Qiang Signed-off-by: David S. Miller