kernel.git/drivers/serial/serial_cs.c, branch linux-2.6.22.y

serial: Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.

2007-02-16T23:19:16Z

Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter. Signed-off-by: Sergei Organov Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman

[PATCH] remove many unneeded #includes of sched.h

2007-02-14T16:09:54Z

After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau Acked-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] serial: replace kmalloc+memset with kzalloc

2007-02-14T16:09:52Z

Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation

2006-12-05T01:12:02Z

struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost all PCMICA driver right at the beginning, using the same calls but slightly different implementations. Unfiy this in the PCMCIA core. Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused label") from and Signed-off-by Adrian Bunk Signed-off-by: Dominik Brodowski

[PATCH] pcmcia: remove manf_id and card_id indirection

2006-12-05T01:09:20Z

As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski

[PATCH] pcmcia: IDs for Elan serial PCMCIA devcies

2006-12-05T01:09:19Z

Add IDs for Elan serial PCMCIA devices. In addition, move the pdaudio_cf driver from matching based on manf_id and card_id to the more specific prod_id1 and prod_id2 to avoid false positives. Signed-off-by: Tony Olech Signed-off-by: Dominik Brodowski

[SERIAL] Fix resume handling bug

2006-10-01T16:14:07Z

Unfortunately, pcmcia_dev_present() returns false when a device is suspended, so checking this on resume does not work too well. Omit this test. Signed-off-by: Russell King

[SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 card

2006-10-01T16:06:45Z

Mauro Ziliani reports that this card has a higher clock rate. Rather than tweak the 8250 driver to handle this, add a quirk to pass the correct clock rate to the driver. Signed-off-by: Russell King

[SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirk

2006-10-01T16:06:41Z

According to the existing code, Nokia only make single-port cards, but are detected as multi-port cards. Handle this in roughly the same way via the config quirk - forcing it to be a real single port card (info->multi=0) changes the way we allocate the IO memory, which might stop the card working. Signed-off-by: Russell King

[SERIAL] serial_cs: add configuration quirk

2006-10-01T16:06:37Z

Add a quirk primerily to handle tweaks to the link->conf structure, eg as required for Socket cards. Signed-off-by: Russell King