kernel.git/drivers/scsi/ufs, branch linux-5.4.y

scsi: ufs: core: Fix spelling of a sysfs attribute name

2025-07-17T16:24:58Z

[ Upstream commit 021f243627ead17eb6500170256d3d9be787dad8 ] Change "resourse" into "resource" in the name of a sysfs attribute. Fixes: d829fc8a1058 ("scsi: ufs: sysfs: unit descriptor") Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org Reviewed-by: Avri Altman Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: bsg: Delete bsg_dev when setting up bsg fails

2025-03-13T11:42:58Z

[ Upstream commit fcf247deb3c3e1c6be5774e3fa03bbd018eff1a9 ] We should remove the bsg device when bsg_setup_queue() fails to release the resources. Fixes: df032bf27a41 ("scsi: ufs: Add a bsg endpoint that supports UPIUs") Signed-off-by: Guixin Liu Link: https://lore.kernel.org/r/20241218014214.64533-2-kanie@linux.alibaba.com Reviewed-by: Avri Altman Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic

2024-08-19T03:33:51Z

commit ab9fd06cb8f0db0854291833fc40c789e43a361f upstream. The ufshcd_add_delay_before_dme_cmd() always introduces a delay of MIN_DELAY_BEFORE_DME_CMDS_US between DME commands even when it's not required. The delay is added when the UFS host controller supplies the quirk UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS. Fix the logic to update hba->last_dme_cmd_tstamp to ensure subsequent DME commands have the correct delay in the range of 0 to MIN_DELAY_BEFORE_DME_CMDS_US. Update the timestamp at the end of the function to ensure it captures the latest time after any necessary delay has been applied. Signed-off-by: Vamshi Gajjela Link: https://lore.kernel.org/r/20240724135126.1786126-1-vamshigajjela@google.com Fixes: cad2e03d8607 ("ufs: add support to allow non standard behaviours (quirks)") Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: ufs: core: Perform read back after disabling UIC_COMMAND_COMPL

2024-06-16T11:28:34Z

[ Upstream commit 4bf3855497b60765ca03b983d064b25e99b97657 ] Currently, the UIC_COMMAND_COMPL interrupt is disabled and a wmb() is used to complete the register write before any following writes. wmb() ensures the writes complete in that order, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring this bit has taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 Let's do that to ensure the bit hits the device. Because the wmb()'s purpose wasn't to add extra ordering (on top of the ordering guaranteed by writel()/readl()), it can safely be removed. Fixes: d75f7fe495cf ("scsi: ufs: reduce the interrupts for power mode change requests") Reviewed-by: Bart Van Assche Reviewed-by: Can Guo Reviewed-by: Manivannan Sadhasivam Signed-off-by: Andrew Halaney Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-9-181252004586@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Perform read back after disabling interrupts

2024-06-16T11:28:34Z

[ Upstream commit e4a628877119bd40164a651d20321247b6f94a8b ] Currently, interrupts are cleared and disabled prior to registering the interrupt. An mb() is used to complete the clear/disable writes before the interrupt is registered. mb() ensures that the write completes, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring these bits have taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 Let's do that to ensure these bits hit the device. Because the mb()'s purpose wasn't to add extra ordering (on top of the ordering guaranteed by writel()/readl()), it can safely be removed. Fixes: 199ef13cac7d ("scsi: ufs: avoid spurious UFS host controller interrupts") Reviewed-by: Manivannan Sadhasivam Reviewed-by: Bart Van Assche Reviewed-by: Can Guo Signed-off-by: Andrew Halaney Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-8-181252004586@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: cdns-pltfrm: Perform read back after writing HCLKDIV

2024-06-16T11:28:33Z

[ Upstream commit b715c55daf598aac8fa339048e4ca8a0916b332e ] Currently, HCLKDIV is written to and then completed with an mb(). mb() ensures that the write completes, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring this bit has taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 Let's do that to ensure the bit hits the device. Because the mb()'s purpose wasn't to add extra ordering (on top of the ordering guaranteed by writel()/readl()), it can safely be removed. Fixes: d90996dae8e4 ("scsi: ufs: Add UFS platform driver for Cadence UFS") Reviewed-by: Manivannan Sadhasivam Signed-off-by: Andrew Halaney Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-6-181252004586@redhat.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: qcom: Perform read back after writing reset bit

2024-06-16T11:28:33Z

[ Upstream commit c4d28e06b0c94636f6e35d003fa9ebac0a94e1ae ] Currently, the reset bit for the UFS provided reset controller (used by its phy) is written to, and then a mb() happens to try and ensure that hit the device. Immediately afterwards a usleep_range() occurs. mb() ensures that the write completes, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring this bit has taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 Let's do that to ensure the bit hits the device. By doing so and guaranteeing the ordering against the immediately following usleep_range(), the mb() can safely be removed. Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms") Reviewed-by: Manivannan Sadhasivam Reviewed-by: Can Guo Signed-off-by: Andrew Halaney Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-1-181252004586@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Leave space for '\0' in utf8 desc string

2023-11-20T09:30:13Z

[ Upstream commit a75a16c62a2540f11eeae4f2b50e95deefb652ea ] utf16s_to_utf8s does not NULL terminate the output string. For us to be able to add a NULL character when utf16s_to_utf8s returns, we need to make sure that there is space for such NULL character at the end of the output buffer. We can achieve this by passing an output buffer size to utf16s_to_utf8s that is one character less than what we allocated. Other call sites of utf16s_to_utf8s appear to be using the same technique where they artificially reduce the buffer size by one to leave space for a NULL character or line feed character. Fixes: 4b828fe156a6 ("scsi: ufs: revamp string descriptor reading") Reviewed-by: Mars Cheng Reviewed-by: Bart Van Assche Reviewed-by: Yen-lin Lai Signed-off-by: Daniel Mentz Link: https://lore.kernel.org/r/20231017182026.2141163-1-danielmentz@google.com Reviewed-by: Avri Altman Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: core: Add soft dependency on governor_simpleondemand

2023-04-05T09:16:39Z

[ Upstream commit 2ebe16155dc8bd4e602cad5b5f65458d2eaa1a75 ] The ufshcd driver uses simpleondemand governor for devfreq. Add it to the list of ufshcd softdeps to allow userspace initramfs tools like dracut to automatically pull the governor module into the initramfs together with UFS drivers. Link: https://lore.kernel.org/r/20230220140740.14379-1-athierry@redhat.com Signed-off-by: Adrien Thierry Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: host: Hold reference returned by of_parse_phandle()

2022-08-03T09:59:38Z

commit a3435afba87dc6cd83f5595e7607f3c40f93ef01 upstream. In ufshcd_populate_vreg(), we should hold the reference returned by of_parse_phandle() and then use it to call of_node_put() for refcount balance. Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com Fixes: aa4976130934 ("ufs: Add regulator enable support") Reviewed-by: Bart Van Assche Signed-off-by: Liang He Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman