kernel.git/drivers/scsi/ses.c, branch linux-3.2.y

ses: fix additional element traversal bug

2016-01-22T21:40:04Z

commit 5e1033561da1152c57b97ee84371dba2b3d64c25 upstream. KASAN found that our additional element processing scripts drop off the end of the VPD page into unallocated space. The reason is that not every element has additional information but our traversal routines think they do, leading to them expecting far more additional information than is present. Fix this by adding a gate to the traversal routine so that it only processes elements that are expected to have additional information (list is in SES-2 section 6.1.13.1: Additional Element Status diagnostic page overview) Reported-by: Pavel Tikhomirov Tested-by: Pavel Tikhomirov Signed-off-by: James Bottomley Signed-off-by: Ben Hutchings

ses: Fix problems with simple enclosures

2016-01-22T21:40:04Z

commit 3417c1b5cb1fdc10261dbed42b05cc93166a78fd upstream. Simple enclosure implementations (mostly USB) are allowed to return only page 8 to every diagnostic query. That really confuses our implementation because we assume the return is the page we asked for and end up doing incorrect offsets based on bogus information leading to accesses outside of allocated ranges. Fix that by checking the page code of the return and giving an error if it isn't the one we asked for. This should fix reported bugs with USB storage by simply refusing to attach to enclosures that behave like this. It's also good defensive practise now that we're starting to see more USB enclosures. Reported-by: Andrea Gelmini Reviewed-by: Ewan D. Milne Reviewed-by: Tomas Henzl Signed-off-by: James Bottomley Signed-off-by: Ben Hutchings

[SCSI] ses: requesting a fault indication

2011-06-29T17:14:25Z

Noticed that when the sysfs interface of the SCSI SES driver was used to request a fault indication the LED flashed but the buzzer didn't sound. So it was doing what REQUEST IDENT (locate) should do. Changelog: - fix the setting of REQUEST FAULT for the device slot and array device slot elements in the enclosure control diagnostic page - note the potentially defective code that reads the FAULT SENSED and FAULT REQUESTED bits from the enclosure status diagnostic page The attached patch is against git/scsi-misc-2.6 Signed-off-by: Douglas Gilbert Cc: stable@kernel.org Signed-off-by: James Bottomley

[SCSI] ses: add subenclosure support

2011-03-23T16:37:09Z

There have been many complaints that an enclosure with subenclosures isn't attached to by the ses driver. Until now, though, no-one had been willing to provide access to one. Subenclosures are added simply by flattening the tree (i.e. all subenclosure devices show up under the one main device). This may have consequences if the naming is only unique per subenclosure, but that's a bug for another day. The tested array had no page 7, so no device naming at all. It also only had the disk devices on one of its subenclosures (all the others had power, fans, temperature and various sensors), so testing of this is fairly rudimentary. Signed-off-by: James Bottomley

[SCSI] ses: show devices for enclosures with no page 7

2011-03-23T16:35:57Z

enclosure page 7 gives us the "pretty" names of the enclosure slots. Without a page 7, we can still use the enclosure code as long as we make up numeric names for the slots. Unfortunately, the current code fails to add any devices because the check for page 10 is in the wrong place if we have no page 7. Fix it so that devices show up even if the enclosure has no page 7. Cc: stable@kernel.org Signed-off-by: James Bottomley

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

drivers/scsi/ses.c: eliminate double free

2010-03-12T23:52:28Z

The few lines below the kfree of hdr_buf may go to the label err_free which will also free hdr_buf. The most straightforward solution seems to be to just move the kfree of hdr_buf after these gotos. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier E; expression E1; iterator I; statement S; @@ *kfree(E); ... when != E = E1 when != I(E,...) S when != &E *kfree(E); // Signed-off-by: Julia Lawall Cc: James Bottomley Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[SCSI] eliminate potential kmalloc failure in scsi_get_vpd_page()

2010-01-18T16:48:05Z

The best way to fix this is to eliminate the intenal kmalloc() and make the caller allocate the required amount of storage. Signed-off-by: James Bottomley

[SCSI] ses: update enclosure data on hot add

2009-08-22T22:52:14Z

Now that hot add works correctly, if a new device is added, we're still operating on stale enclosure data, so fix that by updating the enclosure diagnostic pages when we get notified of a device hot add Signed-off-by: James Bottomley Signed-off-by: James Bottomley

[SCSI] ses: add support for enclosure component hot removal

2009-08-22T22:52:13Z

Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by: James Bottomley Signed-off-by: James Bottomley