kernel.git/drivers/scsi/sd.c, branch linux-5.4.y

scsi: sd: Free scsi_disk device via put_device()

2021-10-09T12:39:49Z

[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ] After a device is initialized via device_initialize() it should be freed via put_device(). sd_probe() currently gets this wrong, fix it up. Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Ming Lei Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: sd: Suppress spurious errors when WRITE SAME is being disabled

2021-01-27T10:47:43Z

[ Upstream commit e5cc9002caafacbaa8dab878d17a313192c3b03b ] The block layer code will split a large zeroout request into multiple bios and if WRITE SAME is disabled because the storage device reports that it does not support it (or support the length used), we can get an error message from the block layer despite the setting of RQF_QUIET on the first request. This is because more than one request may have already been submitted. Fix this by setting RQF_QUIET when BLK_STS_TARGET is returned to fail the request early, we don't need to log a message because we did not actually submit the command to the device, and the block layer code will handle the error by submitting individual write bios. Link: https://lore.kernel.org/r/20201207221021.28243-1-emilne@redhat.com Reviewed-by: Christoph Hellwig Signed-off-by: Ewan D. Milne Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: sd: Fix optimal I/O size for devices that change reported values

2020-04-01T09:02:01Z

commit ea697a8bf5a4161e59806fab14f6e4a46dc7dcb0 upstream. Some USB bridge devices will return a default set of characteristics during initialization. And then, once an attached drive has spun up, substitute the actual parameters reported by the drive. According to the SCSI spec, the device should return a UNIT ATTENTION in case any reported parameters change. But in this case the change is made silently after a small window where default values are reported. Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size") validated the reported optimal I/O size against the physical block size to overcome problems with devices reporting nonsensical transfer sizes. However, this validation did not account for the fact that aforementioned devices will return default values during a brief window during spin-up. The subsequent change in reported characteristics would invalidate the checking that had previously been performed. Unset a previously configured optimal I/O size should the sanity checking fail on subsequent revalidate attempts. Link: https://lore.kernel.org/r/33fb522e-4f61-1b76-914f-c9e6a3553c9b@gmail.com Cc: Bryan Gurney Cc: Reported-by: Bernhard Sulzer Tested-by: Bernhard Sulzer Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: sd: enable compat ioctls for sed-opal

2020-01-17T18:48:51Z

commit 142b2ac82e31c174936c5719fa12ae28f51a55b7 upstream. The sed_ioctl() function is written to be compatible between 32-bit and 64-bit processes, however compat mode is only wired up for nvme, not for sd. Add the missing call to sed_ioctl() in sd_compat_ioctl(). Fixes: d80210f25ff0 ("sd: add support for TCG OPAL self encrypting disks") Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI

2020-01-17T18:48:42Z

commit 465f4edaecc6c37f81349233e84d46246bcac11a upstream. If an attached disk with protection information enabled is reformatted to Type 0 the revalidation code does not clear the original protection type and subsequent accesses will keep setting RDPROTECT/WRPROTECT. Set the protection type to 0 if the disk reports PROT_EN=0 in READ CAPACITY(16). [mkp: commit desc] Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type") Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Xiang Chen Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-11-02T18:15:52Z

Pull SCSI fixes from James Bottomley: "Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4] and one core change in sd that fixes an I/O failure on DIF type 3 devices" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: stop timer in shutdown path scsi: sd: define variable dif as unsigned int instead of bool scsi: target: cxgbit: Fix cxgbit_fw4_ack() scsi: qla2xxx: Fix partial flash write of MBI scsi: qla2xxx: Initialized mailbox to prevent driver load failure scsi: lpfc: Honor module parameter lpfc_use_adisc scsi: ufs-bsg: Wake the device before sending raw upiu commands scsi: lpfc: Check queue pointer before use scsi: qla2xxx: fixup incorrect usage of host_byte

scsi: sd: define variable dif as unsigned int instead of bool

2019-10-25T00:34:10Z

Variable dif in function sd_setup_read_write_cmnd() is the return value of function scsi_host_dif_capable() which returns dif capability of disks. If define it as bool, even for the disks which support DIF3, the function still return dif=1, which causes IO error. So define variable dif as unsigned int instead of bool. Fixes: e249e42d277e ("scsi: sd: Clean up sd_setup_read_write_cmnd()") Link: https://lore.kernel.org/r/1571725628-132736-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Xiang Chen Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-10-15T19:19:08Z

Pull SCSI fixes from James Bottomley: "Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS (qla2xxx) and two in the core. The last two are mostly about removing incorrect messages from the kernel log: the resid message is definitely wrong and the sync cache on protected drive problem is arguably wrong" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Update qla2xxx driver scsi: zfcp: fix reaction on bit error threshold notification scsi: core: save/restore command resid for error handling scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry() scsi: sd: Ignore a failure to sync cache due to lack of authorization

scsi: sd: Ignore a failure to sync cache due to lack of authorization

2019-10-01T03:52:14Z

I've got a report about a UAS drive enclosure reporting back Sense: Logical unit access not authorized if the drive it holds is password protected. While the drive is obviously unusable in that state as a mass storage device, it still exists as a sd device and when the system is asked to perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If that fails due to password protection, the error must be ignored. Cc: Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.com Signed-off-by: Oliver Neukum Signed-off-by: Martin K. Petersen

Merge tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block

2019-09-24T23:31:50Z

Pull more block updates from Jens Axboe: "Some later additions that weren't quite done for the first pull request, and also a few fixes that have arrived since. This contains: - Kill silly pktcdvd warning on attempting to register a non-scsi passthrough device (me) - Use symbolic constants for the block t10 protection types, and switch to handling it in core rather than in the drivers (Max) - libahci platform missing node put fix (Nishka) - Small series of fixes for BFQ (Paolo) - Fix possible nbd crash (Xiubo)" * tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block: block: drop device references in bsg_queue_rq() block: t10-pi: fix -Wswitch warning pktcdvd: remove warning on attempting to register non-passthrough dev ata: libahci_platform: Add of_node_put() before loop exit nbd: fix possible page fault for nbd disk nbd: rename the runtime flags as NBD_RT_ prefixed block, bfq: push up injection only after setting service time block, bfq: increase update frequency of inject limit block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1 block, bfq: update inject limit only after injection occurred block: centralize PI remapping logic to the block layer block: use symbolic constants for t10_pi type