kernel.git/drivers/scsi/sd.c, branch linux-4.15.y

scsi: core: Fix a scsi_show_rq() NULL pointer dereference

2017-12-12T02:56:48Z

Avoid that scsi_show_rq() triggers a NULL pointer dereference if called after sd_uninit_command(). Swap the NULL pointer assignment and the mempool_free() call in sd_uninit_command() to make it less likely that scsi_show_rq() triggers a use-after-free. Note: even with these changes scsi_show_rq() can trigger a use-after-free but that's a lesser evil than e.g. suppressing debug information for T10 PI Type 2 commands completely. This patch fixes the following oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: scsi_format_opcode_name+0x1a/0x1c0 CPU: 1 PID: 1881 Comm: cat Not tainted 4.14.0-rc2.blk_mq_io_hang+ #516 Call Trace: __scsi_format_command+0x27/0xc0 scsi_show_rq+0x5c/0xc0 __blk_mq_debugfs_rq_show+0x116/0x130 blk_mq_debugfs_rq_show+0xe/0x10 seq_read+0xfe/0x3b0 full_proxy_read+0x54/0x90 __vfs_read+0x37/0x160 vfs_read+0x96/0x130 SyS_read+0x55/0xc0 entry_SYSCALL_64_fastpath+0x1a/0xa5 [mkp: added Type 2] Fixes: 0eebd005dd07 ("scsi: Implement blk_mq_ops.show_rq()") Reported-by: Ming Lei Signed-off-by: Bart Van Assche Cc: James E.J. Bottomley Cc: Martin K. Petersen Cc: Ming Lei Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Johannes Thumshirn Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-11-15T00:23:44Z

Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor updates. There's no major behaviour change or additions to the core in all of this, so the potential for regressions should be small (biggest potential being in the scsi error handler changes)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: lpfc: Fix hard lock up NMI in els timeout handling. scsi: mpt3sas: remove a stray KERN_INFO scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event() scsi: aacraid: use timespec64 instead of timeval scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair() scsi: mpt3sas: fix dma_addr_t casts scsi: be2iscsi: Use kasprintf scsi: storvsc: Avoid excessive host scan on controller change scsi: lpfc: fix kzalloc-simple.cocci warnings scsi: mpt3sas: Update mpt3sas driver version. scsi: mpt3sas: Fix sparse warnings scsi: mpt3sas: Fix nvme drives checking for tlr. scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives. scsi: mpt3sas: scan and add nvme device after controller reset scsi: mpt3sas: Set NVMe device queue depth as 128 scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware. scsi: mpt3sas: API's to remove nvme drive from sml scsi: mpt3sas: API 's to support NVMe drive addition to SML ...

scsi: sd: change manage_start_stop to bool in sysfs interface

2017-10-17T05:26:25Z

/sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0 unexpectly by writing an invalid string. Signed-off-by: weiping zhang Signed-off-by: Martin K. Petersen

scsi: sd: change allow_restart to bool in sysfs interface

2017-10-17T05:26:03Z

/sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0 unexpectedly by writing an invalid string such as the following: echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart Signed-off-by: weiping zhang Signed-off-by: Martin K. Petersen

scsi: sd: Do not override max_sectors_kb sysfs setting

2017-10-03T02:16:25Z

A user may lower the max_sectors_kb setting in sysfs to accommodate certain workloads. Previously we would always set the max I/O size to either the block layer default or the optional preferred I/O size reported by the device. Keep the current heuristics for the initial setting of max_sectors_kb. For subsequent invocations, only update the current queue limit if it exceeds the capabilities of the hardware. Cc: Reported-by: Don Brace Reviewed-by: Martin Wilck Tested-by: Don Brace Signed-off-by: Martin K. Petersen

scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP

2017-10-03T02:16:18Z

SBC-4 states: "A MAXIMUM UNMAP LBA COUNT field set to a non-zero value indicates the maximum number of LBAs that may be unmapped by an UNMAP command" "A MAXIMUM WRITE SAME LENGTH field set to a non-zero value indicates the maximum number of contiguous logical blocks that the device server allows to be unmapped or written in a single WRITE SAME command." Despite the spec being clear on the topic, some devices incorrectly expect WRITE SAME commands with the UNMAP bit set to be limited to the value reported in MAXIMUM UNMAP LBA COUNT in the Block Limits VPD. Implement a blacklist option that can be used to accommodate devices with this behavior. Cc: Reported-by: Bill Kuzeja Reported-by: Ewan D. Milne Reviewed-by: Ewan D. Milne Tested-by: Laurence Oberman Signed-off-by: Martin K. Petersen

scsi: sd: Align maximum write same blocks to physical block size

2017-09-25T19:36:40Z

Reporting a maximum number of blocks that is not aligned on the device physical size would cause a large write same request to be split into physically unaligned chunks by __blkdev_issue_write_zeroes() and __blkdev_issue_write_same(), even if the caller of these functions took care to align its request to physical sectors. Make sure the maximum reported is aligned to the device physical block size. This is only an optional optimization for regular disks, but this is mandatory to avoid failure of large write same requests directed at sequential write required zones of host-managed ZBC disks. [mkp: tweaked commit message] Signed-off-by: Damien Le Moal Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: sd: Remove unnecessary condition in sd_read_block_limits()

2017-09-15T19:14:28Z

After series of changes around WRITE_SAME and UNMAP setup we ended up with leftover unnecessary condition. Remove it. Signed-off-by: Lukas Czerner Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

Merge branch 'fixes' into misc

2017-09-07T19:12:43Z

scsi: sd: remove duplicated setting of gd->minors

2017-08-25T21:26:08Z

gd->minors has been set when call alloc_disk() in sd_probe. Signed-off-by: weiping zhang Signed-off-by: Martin K. Petersen