kernel.git/drivers/scsi/scsi_lib.c, branch linux-4.4.y

scsi: core: Retry I/O for Notify (Enable Spinup) Required error

2021-07-20T14:22:36Z

commit 104739aca4488909175e9e31d5cd7d75b82a2046 upstream. If the device is power-cycled, it takes time for the initiator to transmit the periodic NOTIFY (ENABLE SPINUP) SAS primitive, and for the device to respond to the primitive to become ACTIVE. Retry the I/O request to allow the device time to become ACTIVE. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210629155826.48441-1-quat.le@oracle.com Reviewed-by: Bart Van Assche Signed-off-by: Quat Le Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: return correct blkprep status code in case scsi_init_io() fails.

2020-06-20T08:23:15Z

commit e7661a8e5ce10b5321882d0bbaf3f81070903319 upstream. When instrumenting the SCSI layer to run into the !blk_rq_nr_phys_segments(rq) case the following warning emitted from the block layer: blk_peek_request: bad return=-22 This happens because since commit fd3fc0b4d730 ("scsi: don't BUG_ON() empty DMA transfers") we return the wrong error value from scsi_prep_fn() back to the block layer. [mkp: silenced checkpatch] Signed-off-by: Johannes Thumshirn Fixes: fd3fc0b4d730 scsi: don't BUG_ON() empty DMA transfers Cc: Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen [iwamatsu: - backport for 4.4.y and 4.9.y - Use rq->nr_phys_segments instead of blk_rq_nr_phys_segments] Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Greg Kroah-Hartman

scsi: use 'scsi_device_from_queue()' for scsi_dh

2017-03-12T05:37:26Z

commit 857de6e00778738dc3d61f75acbac35bdc48e533 upstream. The device handler needs to check if a given queue belongs to a scsi device; only then does it make sense to attach a device handler. [mkp: dropped flags] Signed-off-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: don't BUG_ON() empty DMA transfers

2017-02-23T16:43:09Z

commit fd3fc0b4d7305fa7246622dcc0dec69c42443f45 upstream. Don't crash the machine just because of an empty transfer. Use WARN_ON() combined with returning an error. Found by Dmitry Vyukov and syzkaller. [ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON() might still be a cause of excessive log spamming. NOTE! If this warning ever triggers, we may end up leaking resources, since this doesn't bother to try to clean the command up. So this WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is much worse. People really need to stop using BUG_ON() for "this shouldn't ever happen". It makes pretty much any bug worse. - Linus ] Signed-off-by: Johannes Thumshirn Reported-by: Dmitry Vyukov Cc: James Bottomley Cc: Al Viro Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands

2016-06-24T17:18:16Z

commit a621bac3044ed6f7ec5fa0326491b2d4838bfa93 upstream. When SCSI was written, all commands coming from the filesystem (REQ_TYPE_FS commands) had data. This meant that our signal for needing to complete the command was the number of bytes completed being equal to the number of bytes in the request. Unfortunately, with the advent of flush barriers, we can now get zero length REQ_TYPE_FS commands, which confuse this logic because they satisfy the condition every time. This means they never get retried even for retryable conditions, like UNIT ATTENTION because we complete them early assuming they're done. Fix this by special casing the early completion condition to recognise zero length commands with errors and let them drop through to the retry code. Reported-by: Sebastian Parschauer Signed-off-by: James E.J. Bottomley Tested-by: Jack Wang Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIM

2015-11-07T01:50:42Z

__GFP_WAIT was used to signal that the caller was in atomic context and could not sleep. Now it is possible to distinguish between true atomic context and callers that are not willing to sleep. The latter should clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing __GFP_WAIT behaves differently, there is a risk that people will clear the wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly indicate what it does -- setting it allows all reclaim activity, clearing them prevents it. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mel Gorman Acked-by: Michal Hocko Acked-by: Vlastimil Babka Acked-by: Johannes Weiner Cc: Christoph Lameter Acked-by: David Rientjes Cc: Vitaly Wool Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

blk-mq: fix racy updates of rq->errors

2015-10-01T08:10:55Z

blk_mq_complete_request may be a no-op if the request has already been completed by others means (e.g. a timeout or cancellation), but currently drivers have to set rq->errors before calling blk_mq_complete_request, which might leave us with the wrong error value. Add an error parameter to blk_mq_complete_request so that we can defer setting rq->errors until we known we won the race to complete the request. Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Signed-off-by: Jens Axboe

scsi_dh: kill struct scsi_dh_data

2015-08-28T20:14:57Z

Add a ->handler and a ->handler_data field to struct scsi_device and kill this indirection. Also move struct scsi_device_handler to scsi_dh.h so that changes to it don't require rebuilding every SCSI LLDD. Signed-off-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Reviewed-by: Hannes Reinecke Signed-off-by: James Bottomley

scsi: Add ALUA state change UA handling

2015-08-26T14:19:57Z

Log the ALUA state change unit attention correctly with the message log and emit an event to allow user-space tools to react to it. Signed-off-by: Hannes Reinecke Reviewed-by: Ewan D. Milne Reviewed-by: Bart Van Assche Signed-off-by: James Bottomley

scsi: retry MODE SENSE on unit attention

2015-07-30T19:37:20Z

The 'sd' driver is calling scsi_mode_sense() to figure out internal details. But scsi_mode_sense() never checks for any pending unit attentions, so we're getting annoying error messages like: MODE SENSE: unimplemented page/subpage: 0x00/0x00 and a possible wrong decision for device cache handling. Reviewed-by: Ewan Milne Signed-off-by: Hannes Reinecke Signed-off-by: James Bottomley