kernel.git/drivers/scsi/lpfc, branch linux-4.16.y

scsi: lpfc: Fix frequency of Release WQE CQEs

2018-05-25T14:46:14Z

[ Upstream commit 04673e38f56b30cd39b1fa0f386137d818b17781 ] The driver controls when the hardware sends completions that communicate consumption of elements from the WQ. This is done by setting a WQEC bit on a WQE. The current driver sets it on every Nth WQE posting. However, the driver isn't clearing the bit if the WQE is reused. Thus, if the queue depth isn't evenly divisible by N, with enough time, it can be set on every element, creating a lot of overhead and risking CQ full conditions. Correct by clearing the bit when not setting it on an Nth element. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix IO failure during hba reset testing with nvme io.

2018-05-25T14:46:14Z

[ Upstream commit 91455b850956bc13708a074bd1400f54aae74890 ] A stress test repeatedly resetting the adapter while performing io would eventually report I/O failures and missing nvme namespaces. The driver was setting the nvmefc_fcp_req->private pointer to NULL during the IO completion routine before upcalling done(). If the transport was also running an abort for that IO, the driver would fail the abort with message 6140. Failing the abort is not allowed by the nvme-fc transport, as it mandates that the io must be returned back to the transport. As that does not happen, the transport controller delete has an outstanding reference and can't complete teardown. The NULL-ing of the private pointer should be done only when the io is considered complete. It's complete when the adapter returns the exchange with the "exchange busy" flag clear. Move the NULL'ing of the structure to the done case. This leaves the io contexts set while it is busy and until the subsequent XRI_ABORTED completion which returns the exchange is received. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing

2018-05-25T14:46:14Z

[ Upstream commit 161df4f09987ae2e9f0f97f0b38eee298b4a39ff ] During link bounce testing in a point-to-point topology, the host may enter a soft lockup on the lpfc_worker thread: Call Trace: lpfc_work_done+0x1f3/0x1390 [lpfc] lpfc_do_work+0x16f/0x180 [lpfc] kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 The driver was simultaneously setting a combination of flags that caused lpfc_do_work()to effectively spin between slow path work and new event data, causing the lockup. Ensure in the typical wq completions, that new event data flags are set if the slow path flag is running. The slow path will eventually reschedule the wq handling. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix nonrecovery of NVME controller after cable swap.

2018-05-25T14:46:14Z

[ Upstream commit 815a9c437617e221842d12b3366ff6911b3df628 ] In a test that is doing large numbers of cable swaps on the target, the nvme controllers wouldn't reconnect. During the cable swaps, the targets n_port_id would change. This information was passed to the nvme-fc transport, in the new remoteport registration. However, the nvme-fc transport didn't update the n_port_id value in the remoteport struct when it reused an existing structure. Later, when a new association was attempted on the remoteport, the driver's NVME LS routine would use the stale n_port_id from the remoteport struct to address the LS. As the device is no longer at that address, the LS would go into never never land. Separately, the nvme-fc transport will be corrected to update the n_port_id value on a re-registration. However, for now, there's no reason to use the transports values. The private pointer points to the drivers node structure and the node structure is up to date. Therefore, revise the LS routine to use the drivers data structures for the LS. Augmented the debug message for better debugging in the future. Also removed a duplicate if check that seems to have slipped in. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix issue_lip if link is disabled

2018-05-25T14:46:14Z

[ Upstream commit 2289e9598dde9705400559ca2606fb8c145c34f0 ] The driver ignored checks on whether the link should be kept administratively down after a link bounce. Correct the checks. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix NVME Initiator FirstBurst

2018-05-25T14:46:14Z

[ Upstream commit 0709263abe0de70a798dcdf481d5dd489ca4752e ] First Burst support was not properly indicated in NVMe PRLI. Correct the bit position and the logic to check and set first burst support. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2018-02-01T18:00:28Z

Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-01-31T19:23:28Z

Pull SCSI updates from James Bottomley: "This is mostly updates of the usual driver suspects: arcmsr, scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas, hisi_sas. We also have a rework of the libsas hotplug handling to make it more robust, a slew of 32 bit time conversions and fixes, and a host of the usual minor updates and style changes. The biggest potential for regressions is the libsas hotplug changes, but so far they seem stable under testing" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (313 commits) scsi: qla2xxx: Fix logo flag for qlt_free_session_done() scsi: arcmsr: avoid do_gettimeofday scsi: core: Add VENDOR_SPECIFIC sense code definitions scsi: qedi: Drop cqe response during connection recovery scsi: fas216: fix sense buffer initialization scsi: ibmvfc: Remove unneeded semicolons scsi: hisi_sas: fix a bug in hisi_sas_dev_gone() scsi: hisi_sas: directly attached disk LED feature for v2 hw scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw scsi: megaraid_sas: NVMe passthrough command support scsi: megaraid: use ktime_get_real for firmware time scsi: fnic: use 64-bit timestamps scsi: qedf: Fix error return code in __qedf_probe() scsi: devinfo: fix format of the device list scsi: qla2xxx: Update driver version to 10.00.00.05-k scsi: qla2xxx: Add XCB counters to debugfs scsi: qla2xxx: Fix queue ID for async abort with Multiqueue scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event() scsi: qla2xxx: Fix warning during port_name debug print scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout() ...

treewide: Use DEVICE_ATTR_WO

2018-01-09T15:34:35Z

Convert DEVICE_ATTR uses to DEVICE_ATTR_WO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*$\s*(\w+)\s*,\s*\(?(?:\s*S_IWUSR\s*|\s*0200\s*)$?\s*,\s*NULL\s*,\s*\s_store\s*\)/DEVICE_ATTR_WO(\1)/g; print;}' Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman

treewide: Use DEVICE_ATTR_RO

2018-01-09T15:34:34Z

Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*$\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)$?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}' Signed-off-by: Joe Perches Acked-by: Rafael J. Wysocki Acked-by: Robert Jarzmik Acked-by: Sagi Grimberg Acked-by: Zhang Rui Acked-by: Harald Freudenberger Acked-by: Jani Nikula Acked-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman