kernel.git/drivers/scsi/lpfc, branch linux-4.15.y

scsi: lpfc: Fix issues connecting with nvme initiator

2018-03-24T10:02:51Z

[ Upstream commit e06351a002214d152142906a546006e3446d1ef7 ] In the lpfc discovery engine, when as a nvme target, where the driver was performing mailbox io with the adapter for port login when a NVME PRLI is received from the host. Rather than queue and eventually get back to sending a response after the mailbox traffic, the driver rejected the io with an error response. Turns out this particular initiator didn't like the rejection values (unable to process command/command in progress) so it never attempted a retry of the PRLI. Thus the host never established nvme connectivity with the lpfc target. By changing the rejection values (to Logical Busy/nothing more), the initiator accepted the response and would retry the PRLI, resulting in nvme connectivity. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled

2018-03-24T10:02:51Z

[ Upstream commit 9de416ac67b54d666327ba927a190f4b7259f4a0 ] When enabled for both SCSI and NVME support, and connected pt2pt to a SCSI only target, the driver nodelist entry for the remote port is left in PRLI_ISSUE state and no SCSI LUNs are discovered. Works fine if only configured for SCSI support. Error was due to some of the prli points still reflecting the need to send only 1 PRLI. On a lot of fabric configs, targets were NVME only, which meant the fabric-reported protocol attributes were only telling the driver one protocol or the other. Thus things worked fine. With pt2pt, the driver must send a PRLI for both protocols as there are no hints on what the target supports. Thus pt2pt targets were hitting the multiple PRLI issues. Complete the dual PRLI support. Track explicitly whether scsi (fcp) or nvme prli's have been sent. Accurately track protocol support detected on each node as reported by the fabric or probed by PRLI traffic. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix crash during driver unload with running nvme traffic

2018-03-19T08:09:55Z

[ Upstream commit 3386f4bdd243ad5a9094d390297602543abe9902 ] When the driver is unloading, the nvme transport could be in the process of submitting new requests, will send abort requests to terminate associations, or may make LS-related requests. The driver's abort and request entry points currently is ignorant of the unloading state and is starting the requests even though the infrastructure to complete them continues to teardown. Change the entry points for new requests to check whether unloading and if so, reject the requests. Abort routines check unloading, and if so, noop the request. An abort is noop'd as the teardown paths are already aborting/terminating the io outstanding at the time the teardown initiated. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix crash after bad bar setup on driver attachment

2018-02-16T19:07:01Z

commit e4b9794efdce13242f4af6682f3ed48ce3864a87 upstream. In test cases where an instance of the driver is detached and reattached, the driver will crash on reattachment. There is a compound if statement that will skip over the bar setup if the pci_resource_start call is not successful. The driver erroneously returns success to its bar setup in this scenario even though the bars aren't properly configured. Rework the offending code segment for proper initialization steps. If the pci_resource_start call fails, -ENOMEM is now returned. Sample stack: rport-5:0-10: blocked FC remote port time out: removing rport BUG: unable to handle kernel NULL pointer dereference at (null) ... lpfc_sli4_wait_bmbx_ready+0x32/0x70 [lpfc] ... ... RIP: 0010:... ... lpfc_sli4_wait_bmbx_ready+0x32/0x70 [lpfc] Call Trace: ... lpfc_sli4_post_sync_mbox+0x106/0x4d0 [lpfc] ... ? __alloc_pages_nodemask+0x176/0x420 ... ? __kmalloc+0x2e/0x230 ... lpfc_sli_issue_mbox_s4+0x533/0x720 [lpfc] ... ? mempool_alloc+0x69/0x170 ... ? dma_generic_alloc_coherent+0x8f/0x140 ... lpfc_sli_issue_mbox+0xf/0x20 [lpfc] ... lpfc_sli4_driver_resource_setup+0xa6f/0x1130 [lpfc] ... ? lpfc_pci_probe_one+0x23e/0x16f0 [lpfc] ... lpfc_pci_probe_one+0x445/0x16f0 [lpfc] ... local_pci_probe+0x45/0xa0 ... work_for_cpu_fn+0x14/0x20 ... process_one_work+0x17a/0x440 Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Use after free in lpfc_rq_buf_free()

2017-11-29T04:46:06Z

The error message dereferences "rqb_entry" so we need to print it first and then free the buffer. Fixes: 6c621a2229b0 ("scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context") Signed-off-by: Dan Carpenter Acked-by: Dick Kennedy Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-11-15T00:23:44Z

Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor updates. There's no major behaviour change or additions to the core in all of this, so the potential for regressions should be small (biggest potential being in the scsi error handler changes)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: lpfc: Fix hard lock up NMI in els timeout handling. scsi: mpt3sas: remove a stray KERN_INFO scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event() scsi: aacraid: use timespec64 instead of timeval scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair() scsi: mpt3sas: fix dma_addr_t casts scsi: be2iscsi: Use kasprintf scsi: storvsc: Avoid excessive host scan on controller change scsi: lpfc: fix kzalloc-simple.cocci warnings scsi: mpt3sas: Update mpt3sas driver version. scsi: mpt3sas: Fix sparse warnings scsi: mpt3sas: Fix nvme drives checking for tlr. scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives. scsi: mpt3sas: scan and add nvme device after controller reset scsi: mpt3sas: Set NVMe device queue depth as 128 scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware. scsi: mpt3sas: API's to remove nvme drive from sml scsi: mpt3sas: API 's to support NVMe drive addition to SML ...

Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-block

2017-11-14T23:32:19Z

Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...

lpfc: tie in to new dev_loss_tmo interface in nvme transport

2017-11-11T02:53:25Z

This patch calls the new nvme transport routine for dev_loss_tmo whenever the SCSI fc transport calls the lldd to make a dynamic change to a remote ports dev_loss_tmo. Signed-off-by: James Smart Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

scsi: lpfc: Fix hard lock up NMI in els timeout handling.

2017-11-08T23:25:12Z

System crashed due to a hard lockup at lpfc_els_timeout_handler+0x128. The els ring's txcmplq list is corrupted: the last element in the list does not point back the the head causing a loop. Issue is the els processing path for sli4 hbas are using the hbalock instead of the ring_lock for removing elements from the txcmplq list. Use the adapter SLI_REV to determine which lock should be used for removing iocbqs from the els rings txcmplq. note: the future refactoring will address this so that we don't have this ugly type-based lock code. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen

scsi: lpfc: fix kzalloc-simple.cocci warnings

2017-11-03T16:26:09Z

drivers/scsi/lpfc/lpfc_debugfs.c:5460:22-29: WARNING: kzalloc should be used for phba -> nvmeio_trc, instead of kmalloc/memset drivers/scsi/lpfc/lpfc_debugfs.c:2230:20-27: WARNING: kzalloc should be used for phba -> nvmeio_trc, instead of kmalloc/memset Use kzalloc rather than kmalloc followed by memset with 0 Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Signed-off-by: Vasyl Gomonovych Acked-by: James Smart Signed-off-by: Martin K. Petersen