kernel.git/drivers/scsi/libsas, branch linux-3.8.y

SCSI: libsas: fix handling vacant phy in sas_set_ex_phy()

2013-04-17T04:48:28Z

commit d4a2618fa77b5e58ec15342972bd3505a1c3f551 upstream. If a result of the SMP discover function is PHY VACANT, the content of discover response structure (dr) is not valid. It sometimes happens that dr->attached_sas_addr can contain even SAS address of other phy. In such case an invalid phy is created, what causes NULL pointer dereference during destruction of expander's phys. So if a result of SMP function is PHY VACANT, the content of discover response structure (dr) must not be copied to phy structure. This patch fixes the following bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [] sysfs_find_dirent+0x12/0x90 Call Trace: [] sysfs_get_dirent+0x35/0x80 [] sysfs_unmerge_group+0x1e/0xb0 [] dpm_sysfs_remove+0x24/0x90 [] device_del+0x44/0x1d0 [] sas_rphy_delete+0x9/0x20 [scsi_transport_sas] [] sas_destruct_devices+0xe6/0x110 [libsas] [] process_one_work+0x16c/0x350 [] worker_thread+0x17a/0x410 [] kthread+0x96/0xa0 [] kernel_thread_helper+0x4/0x10 Signed-off-by: Lukasz Dorau Signed-off-by: Pawel Baldysiak Reviewed-by: Maciej Patelczyk Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

treewide: fix typo of "suport" in various comments and Kconfig

2012-11-19T13:16:09Z

Signed-off-by: Masanari Iida Signed-off-by: Jiri Kosina

[SCSI] libsas, ipr: cleanup ata_host flags initialization via ata_host_init

2012-08-24T09:10:24Z

libsas and ipr pass flags to ata_host_init that are meant for the port. ata_host flags: ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ ATA_HOST_STARTED = (1 << 1), /* Host started */ ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */ ATA_HOST_IGNORE_ATA = (1 << 3), /* Ignore ATA devices on this host. */ flags passed by libsas: ATA_FLAG_SATA = (1 << 1), ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ The only one that aliases is ATA_HOST_STARTED which is a 'don't care' in the libsas and ipr cases since ata_hosts from these sources are not registered with libata. Reported-by: Hannes Reinecke Signed-off-by: Dan Williams Acked-by: Brian King Acked-by: Jeff Garzik Signed-off-by: James Bottomley

[SCSI] libsas: suspend / resume support

2012-08-24T09:10:23Z

libsas power management routines to suspend and recover the sas domain based on a model where the lldd is allowed and expected to be "forgetful". sas_suspend_ha - disable event processing allowing the lldd to take down links without concern for causing hotplug events. Regardless of whether the lldd actually posts link down messages libsas notifies the lldd that all domain_devices are gone. sas_prep_resume_ha - on the way back up before the lldd starts link training clean out any spurious events that were generated on the way down, and re-enable event processing sas_resume_ha - after the lldd has started and decided that all phys have posted link-up events this routine is called to let libsas start it's own timeout of any phys that did not resume. After the timeout an lldd can cancel the phy teardown by posting a link-up event. Storage for ex_change_count (u16) and phy_change_count (u8) are changed to int so they can be set to -1 to indicate 'invalidated'. Signed-off-by: Dan Williams Reviewed-by: Jacek Danecki Tested-by: Maciej Patelczyk Acked-by: Alan Stern Signed-off-by: James Bottomley

[SCSI] async: introduce 'async_domain' type

2012-07-20T08:05:54Z

This is in preparation for teaching async_synchronize_full() to sync all pending async work, and not just on the async_running domain. This conversion is functionally equivalent, just embedding the existing list in a new async_domain type. The .registered attribute is used in a later patch to distinguish between domains that want to be flushed by async_synchronize_full() versus those that only expect async_synchronize_{full|cookie}_domain to be used for flushing. [jejb: add async.h to scsi_priv.h for struct async_domain] Signed-off-by: Dan Williams Acked-by: Arjan van de Ven Acked-by: Mark Brown Tested-by: Eldad Zack Signed-off-by: James Bottomley

[SCSI] libsas: trim sas_task of slow path infrastructure

2012-07-20T07:58:54Z

The timer and the completion are only used for slow path tasks (smp, and lldd tmfs), yet we incur the allocation space and cpu setup time for every fast path task. Cc: Xiangliang Yu Acked-by: Jack Wang Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] libsas: drop sata port multiplier infrastructure

2012-07-20T07:58:53Z

On the way to add a new sata_device field, noticed that libsas is carrying port multiplier infrastructure that is explicitly disabled by sas_discover_sata(). The aic94xx touches the unused port_no, so leave that field in case there was some use for it. Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] libsas: fix sas_discover_devices return code handling

2012-07-20T07:58:53Z

commit 198439e4 [SCSI] libsas: do not set res = 0 in sas_ex_discover_dev() commit 19252de6 [SCSI] libsas: fix wide port hotplug issues The above commits seem to have confused the return value of sas_ex_discover_dev which is non-zero on failure and sas_ex_join_wide_port which just indicates short circuiting discovery on already established ports. The result is random discovery failures depending on configuration. Calls to sas_ex_join_wide_port are the source of the trouble as its return value is errantly assigned to 'res'. Convert it to bool and stop returning its result up the stack. Cc: Tested-by: Dan Melnic Reported-by: Dan Melnic Signed-off-by: Dan Williams Reviewed-by: Jack Wang Signed-off-by: James Bottomley

[SCSI] libsas: continue revalidation

2012-07-20T07:58:52Z

Continue running revalidation until no more broadcast devices are discovered. Fixes cases where re-discovery completes too early in a domain with multiple expanders with pending re-discovery events. Servicing BCNs can get backed up behind error recovery. Cc: Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] libsas: sas_rediscover_dev did not look at the SMP exec status.

2012-07-20T07:58:52Z

The discovery function "sas_rediscover_dev" had two bugs: 1) it did not pay attention to the return status from the SMP task execution; 2) the stack variable used for the returned SAS address was compared against 0 without being initialized. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams Signed-off-by: James Bottomley