kernel.git/drivers/scsi/libiscsi.c, branch linux-5.4.y

scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocated

2025-08-28T14:21:27Z

[ Upstream commit 3ea3a256ed81f95ab0f3281a0e234b01a9cae605 ] In case of an ib_fast_reg_mr allocation failure during iSER setup, the machine hits a panic because iscsi_conn->dd_data is initialized unconditionally, even when no memory is allocated (dd_size == 0). This leads invalid pointer dereference during connection teardown. Fix by setting iscsi_conn->dd_data only if memory is actually allocated. Panic trace: ------------ iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12 iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers BUG: unable to handle page fault for address: fffffffffffffff8 RIP: 0010:swake_up_locked.part.5+0xa/0x40 Call Trace: complete+0x31/0x40 iscsi_iser_conn_stop+0x88/0xb0 [ib_iser] iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi] iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi] iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi] ? netlink_lookup+0x12f/0x1b0 ? netlink_deliver_tap+0x2c/0x200 netlink_unicast+0x1ab/0x280 netlink_sendmsg+0x257/0x4f0 ? _copy_from_user+0x29/0x60 sock_sendmsg+0x5f/0x70 Signed-off-by: Showrya M N Signed-off-by: Potnuri Bharat Teja Link: https://lore.kernel.org/r/20250627112329.19763-1-showrya@chelsio.com Reviewed-by: Chris Leech Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()

2022-01-11T14:23:33Z

[ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ] |- iscsi_if_destroy_conn |-dev_attr_show |-iscsi_conn_teardown |-spin_lock_bh |-iscsi_sw_tcp_conn_get_param |-kfree(conn->persistent_address) |-iscsi_conn_get_param |-kfree(conn->local_ipaddr) ==>|-read persistent_address ==>|-read local_ipaddr |-spin_unlock_bh When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a UAF may be triggered. Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com Reported-by: Lu Tixiong Reviewed-by: Mike Christie Reviewed-by: Lee Duncan Signed-off-by: Lixiaokeng Signed-off-by: Linfeilong Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: iscsi: Fix conn use after free during resets

2021-07-20T14:10:43Z

[ Upstream commit ec29d0ac29be366450a7faffbcf8cba3a6a3b506 ] If we haven't done a unbind target call we can race where iscsi_conn_teardown wakes up the EH thread and then frees the conn while those threads are still accessing the conn ehwait. We can only do one TMF per session so this just moves the TMF fields from the conn to the session. We can then rely on the iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call to remove the target and it's devices, and know after that point there is no device or scsi-ml callout trying to access the session. Link: https://lore.kernel.org/r/20210525181821.7617-14-michael.christie@oracle.com Reviewed-by: Lee Duncan Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: iscsi: Add iscsi_cls_conn refcount helpers

2021-07-20T14:10:43Z

[ Upstream commit b1d19e8c92cfb0ded180ef3376c20e130414e067 ] There are a couple places where we could free the iscsi_cls_conn while it's still in use. This adds some helpers to get/put a refcount on the struct and converts an exiting user. Subsequent commits will then use the helpers to fix 2 bugs in the eh code. Link: https://lore.kernel.org/r/20210525181821.7617-11-michael.christie@oracle.com Reviewed-by: Lee Duncan Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling

2021-03-17T16:03:45Z

[ Upstream commit d28d48c699779973ab9a3bd0e5acfa112bd4fdef ] If iscsi_prep_scsi_cmd_pdu() fails we try to add it back to the cmdqueue, but we leave it partially setup. We don't have functions that can undo the pdu and init task setup. We only have cleanup_task which can clean up both parts. So this has us just fail the cmd and go through the standard cleanup routine and then have the SCSI midlayer retry it like is done when it fails in the queuecommand path. Link: https://lore.kernel.org/r/20210207044608.27585-2-michael.christie@oracle.com Reviewed-by: Lee Duncan Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: iscsi: Ensure sysfs attributes are limited to PAGE_SIZE

2021-03-07T11:20:48Z

commit ec98ea7070e94cc25a422ec97d1421e28d97b7ee upstream. As the iSCSI parameters are exported back through sysfs, it should be enforcing that they never are more than PAGE_SIZE (which should be more than enough) before accepting updates through netlink. Change all iSCSI sysfs attributes to use sysfs_emit(). Cc: stable@vger.kernel.org Reported-by: Adam Nichols Reviewed-by: Lee Duncan Reviewed-by: Greg Kroah-Hartman Reviewed-by: Mike Christie Signed-off-by: Chris Leech Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: libiscsi: Fix NOP race condition

2020-12-02T07:49:49Z

[ Upstream commit fe0a8a95e7134d0b44cd407bc0085b9ba8d8fe31 ] iSCSI NOPs are sometimes "lost", mistakenly sent to the user-land iscsid daemon instead of handled in the kernel, as they should be, resulting in a message from the daemon like: iscsid: Got nop in, but kernel supports nop handling. This can occur because of the new forward- and back-locks, and the fact that an iSCSI NOP response can occur before processing of the NOP send is complete. This can result in "conn->ping_task" being NULL in iscsi_nop_out_rsp(), when the pointer is actually in the process of being set. To work around this, we add a new state to the "ping_task" pointer. In addition to NULL (not assigned) and a pointer (assigned), we add the state "being set", which is signaled with an INVALID pointer (using "-1"). Link: https://lore.kernel.org/r/20201106193317.16993-1-leeman.duncan@gmail.com Reviewed-by: Mike Christie Signed-off-by: Lee Duncan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: iscsi: Fix a potential deadlock in the timeout handler

2019-12-21T10:05:04Z

commit 5480e299b5ae57956af01d4839c9fc88a465eeab upstream. Some time ago the block layer was modified such that timeout handlers are called from thread context instead of interrupt context. Make it safe to run the iSCSI timeout handler in thread context. This patch fixes the following lockdep complaint: ================================ WARNING: inconsistent lock state 5.5.1-dbg+ #11 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/7:1H/206 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff88802d9827e8 (&(&session->frwd_lock)->rlock){+.?.}, at: iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_check_transport_timeouts+0x3e/0x210 [libiscsi] call_timer_fn+0x132/0x470 __run_timers.part.0+0x39f/0x5b0 run_timer_softirq+0x63/0xc0 __do_softirq+0x12d/0x5fd irq_exit+0xb3/0x110 smp_apic_timer_interrupt+0x131/0x3d0 apic_timer_interrupt+0xf/0x20 default_idle+0x31/0x230 arch_cpu_idle+0x13/0x20 default_idle_call+0x53/0x60 do_idle+0x38a/0x3f0 cpu_startup_entry+0x24/0x30 start_secondary+0x222/0x290 secondary_startup_64+0xa4/0xb0 irq event stamp: 1383705 hardirqs last enabled at (1383705): [] _raw_spin_unlock_irq+0x2c/0x50 hardirqs last disabled at (1383704): [] _raw_spin_lock_irq+0x18/0x50 softirqs last enabled at (1383690): [] iscsi_queuecommand+0x76a/0xa20 [libiscsi] softirqs last disabled at (1383682): [] iscsi_queuecommand+0x118/0xa20 [libiscsi] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&session->frwd_lock)->rlock); lock(&(&session->frwd_lock)->rlock); *** DEADLOCK *** 2 locks held by kworker/7:1H/206: #0: ffff8880d57bf928 ((wq_completion)kblockd){+.+.}, at: process_one_work+0x472/0xab0 #1: ffff88802b9c7de8 ((work_completion)(&q->timeout_work)){+.+.}, at: process_one_work+0x476/0xab0 stack backtrace: CPU: 7 PID: 206 Comm: kworker/7:1H Not tainted 5.5.1-dbg+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0xa5/0xe6 print_usage_bug.cold+0x232/0x23b mark_lock+0x8dc/0xa70 __lock_acquire+0xcea/0x2af0 lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] scsi_times_out+0xf4/0x440 [scsi_mod] scsi_timeout+0x1d/0x20 [scsi_mod] blk_mq_check_expired+0x365/0x3a0 bt_iter+0xd6/0xf0 blk_mq_queue_tag_busy_iter+0x3de/0x650 blk_mq_timeout_work+0x1af/0x380 process_one_work+0x56d/0xab0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Fixes: 287922eb0b18 ("block: defer timeouts to a workqueue") Cc: Christoph Hellwig Cc: Keith Busch Cc: Lee Duncan Cc: Chris Leech Cc: Link: https://lore.kernel.org/r/20191209173457.187370-1-bvanassche@acm.org Signed-off-by: Bart Van Assche Reviewed-by: Lee Duncan Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-03-16T19:51:50Z

Pull more SCSI updates from James Bottomley: "This is the final round of mostly small fixes and performance improvements to our initial submit. The main regression fix is the ia64 simscsi build failure which was missed in the serial number elimination conversion" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: ia64: simscsi: use request tag instead of serial_number scsi: aacraid: Fix performance issue on logical drives scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() scsi: libiscsi: Hold back_lock when calling iscsi_complete_task scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port scsi: hisi_sas: Set PHY linkrate when disconnected scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO scsi: hisi_sas: Change return variable type in phy_up_v3_hw() scsi: qla2xxx: check for kstrtol() failure scsi: lpfc: fix 32-bit format string warning scsi: lpfc: fix unused variable warning scsi: target: tcmu: Switch to bitmap_zalloc() scsi: libiscsi: fall back to sendmsg for slab pages scsi: qla2xxx: avoid printf format warning scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check scsi: ufs: hisi: fix ufs_hba_variant_ops passing scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show ...