kernel.git/drivers/scsi/libfc/fc_disc.c, branch linux-2.6.36.y

[SCSI] libfc: don't require a local exchange for incoming requests

2010-07-28T14:06:02Z

Incoming requests shouldn't require a local exchange if we're just going to reply with one or two frames and don't expect anything further. Don't allocate exchanges for such requests until requested by the upper-layer protocol. The sequence is always NULL for new requests, so remove that as an argument to request handlers. Also change the first argument to lport->tt.seq_els_rsp_send from the sequence pointer to the received frame pointer, to supply the exchange IDs and destination ID info. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley

[SCSI] libfc: add discovery-private pointer for LLD

2010-07-28T14:05:52Z

For VN_port to VN_port mode, FIP will do discovery and needs a way to find its state from the local port or discovery structure. It seems that any other LLD that implements its own discovery would also need something like this. Replace disc->lport with disc->priv, and use container_of to find the lport. We could use disc->priv for that, but container_of is smaller and faster. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley

[SCSI] libfc: convert rport lookup to be RCU safe

2010-07-28T14:05:48Z

To allow LLD to do lookups on rports without grabbing a mutex, make them RCU-safe. The caller of lport->tt.rport_lookup will have the choice of holding disc_mutex or the rcu_read_lock(). Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley

[SCSI] libfc: Move the port_id into lport

2010-05-17T02:22:34Z

This patch creates a port_id member in struct fc_lport. This allows libfc to just deal with fc_lport instances instead of calling into the fc_host to get the port_id. This change helps in only using symbols necessary for operation from the libfc structures. libfc still needs to change the fc_host_port_id() if the port_id changes so the presentation layer (scsi_transport_fc) can provide the user with the correct value, but libfc shouldn't rely on the presentation layer for operational values. Signed-off-by: Robert Love Signed-off-by: James Bottomley

[SCSI] libfc, fcoe: normalize format specifies for world wide names

2010-04-11T19:02:42Z

Print all world wide node names (node, port and fabric) with the same format specifier of "%16.16llx". That makes sure they all print as a 16 character hex string, with lower case letters, no 0x prefix, and without stripping off any leading 0s. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley

[SCSI] libfc: set both precision and field with when printing FC IDs

2010-04-11T19:02:41Z

Most of the prints of fabric IDs were specified as %6x, which will not print any leading 0s. It's nice to see leading 0s for identifiers like this, which are a fixed length. This patch sets the precision modifier as well, making the specifier %6.6x, which forces the printing of leading 0s. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

[SCSI] libfc fcoe: increase ELS and CT timeouts

2009-12-04T18:01:27Z

The FC-LS spec. says ELS timeouts should be 2 x R_A_TOV. The FC-GS spec. says CT timeouts should be 3 x R_A_TOV. We've been using E_D_TOV for both of those. Change for all ELS and CT requests except FLOGI, which we leave at 2 seconds (using E_D_TOV). One could argue that R_A_TOV is locally determined until after FLOGI succeeds. This does change FLOGI for vports which becomes FDISC. This does not change the REC/SRR timeout which is 2 seconds. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley

[SCSI] libfc: Formatting cleanups across libfc

2009-12-04T18:01:07Z

This patch makes a variety of cleanup changes to all libfc files. This patch adds kernel-doc headers to all functions lacking them and attempts to better format existing headers. It also add kernel-doc headers to structures. This patch ensures that the current naming conventions for local ports, remote ports and remote port private data is upheld in the following manner. struct instance (i.e. variable name) -------------------------------------------------- fc_lport lport fc_rport rport fc_rport_libfc_priv rpriv fc_rport_priv rdata I also renamed dns_rp and ptp_rp to dns_rdata and ptp_rdata respectively. I used emacs 'indent-region' and 'tabify' on all libfc files to correct spacing alignments. I feel sorry for anyone attempting to review this patch. Signed-off-by: Robert Love Signed-off-by: James Bottomley

[SCSI] libfc: Add libfc/fc_libfc.[ch] for libfc internal routines

2009-12-04T18:00:55Z

include/scsi/libfc.h is currently loaded with common code shared between libfc's sub-modules as well as shared between libfc and fcoe. Previous patches attempted to move out non-common code. This patch creates two files for common libfc routines that will not be shared with fcoe, fnic or any other LLDs. Signed-off-by: Robert Love Signed-off-by: James Bottomley