kernel.git/drivers/scsi/fnic, branch linux-5.4.y

scsi: fnic: Return error if vmalloc() failed

2024-01-25T22:34:25Z

[ Upstream commit f5f27a332a14f43463aa0075efa3a0c662c0f4a8 ] In fnic_init_module() exists redundant check for return value from fnic_debugfs_init(), because at moment it only can return zero. It make sense to process theoretical vmalloc() failure. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 9730ddfb123d ("scsi: fnic: remove redundant assignment of variable rc") Signed-off-by: Artem Chernyshev Link: https://lore.kernel.org/r/20231128111008.2280507-1-artem.chernyshev@red-soft.ru Reviewed-by: Karan Tilak Kumar Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: fnic: Fix memleak in vnic_dev_init_devcmd2

2021-02-07T14:35:48Z

[ Upstream commit d6e3ae76728ccde49271d9f5acfebbea0c5625a3 ] When ioread32() returns 0xFFFFFFFF, we should execute cleanup functions like other error handling paths before returning. Link: https://lore.kernel.org/r/20201225083520.22015-1-dinghao.liu@zju.edu.cn Acked-by: Karan Tilak Kumar Signed-off-by: Dinghao Liu Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: fnic: Fix error return code in fnic_probe()

2020-12-30T10:51:21Z

[ Upstream commit d4fc94fe65578738ded138e9fce043db6bfc3241 ] Return a negative error code from the error handling case instead of 0 as done elsewhere in this function. Link: https://lore.kernel.org/r/1607068060-31203-1-git-send-email-zhangchangzhong@huawei.com Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA") Reported-by: Hulk Robot Reviewed-by: Karan Tilak Kumar Signed-off-by: Zhang Changzhong Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: fnic: fix use after free

2020-10-01T11:17:14Z

[ Upstream commit ec990306f77fd4c58c3b27cc3b3c53032d6e6670 ] The memory chunk io_req is released by mempool_free. Accessing io_req->start_time will result in a use after free bug. The variable start_time is a backup of the timestamp. So, use start_time here to avoid use after free. Link: https://lore.kernel.org/r/1572881182-37664-1-git-send-email-bianpan2016@163.com Signed-off-by: Pan Bian Reviewed-by: Satish Kharat Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: fnic: do not queue commands during fwreset

2020-02-05T21:22:49Z

[ Upstream commit 0e2209629fec427ba75a6351486153a9feddd36b ] When a link is going down the driver will be calling fnic_cleanup_io(), which will traverse all commands and calling 'done' for each found command. While the traversal is handled under the host_lock, calling 'done' happens after the host_lock is being dropped. As fnic_queuecommand_lck() is being called with the host_lock held, it might well be that it will pick the command being selected for abortion from the above routine and enqueue it for sending, but then 'done' is being called on that very command from the above routine. Which of course confuses the hell out of the scsi midlayer. So fix this by not queueing commands when fnic_cleanup_io is active. Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.de Signed-off-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: fnic: fix invalid stack access

2020-01-23T07:22:35Z

commit 42ec15ceaea74b5f7a621fc6686cbf69ca66c4cf upstream. gcc -O3 warns that some local variables are not properly initialized: drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify': drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized] vdev->args[0] = *a0; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here u64 a0, a1; ^~ drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized] vdev->args[1] = *a1; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here u64 a0, a1; ^~ drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr': drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized] vdev->args[1] = *a1; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here u64 a0, a1; ^~ Apparently the code relies on the local variables occupying adjacent memory locations in the same order, but this is of course not guaranteed. Use an array of two u64 variables where needed to make it work correctly. I suspect there is also an endianness bug here, but have not digged in deep enough to be sure. Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA") Fixes: mmtom ("init/Kconfig: enable -O3 for all arches") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.de Signed-off-by: Arnd Bergmann Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: fnic: fix msix interrupt allocation

2019-09-07T19:29:12Z

pci_alloc_irq_vectors() returns number of vectors allocated. Fix the check for error condition. Fixes: cca678dfbad49 ("scsi: fnic: switch to pci_alloc_irq_vectors") Link: https://lore.kernel.org/r/20190827211340.1095-1-gvaradar@cisco.com Signed-off-by: Govindarajulu Varadarajan Acked-by: Satish Kharat Signed-off-by: Martin K. Petersen

scsi: fnic: print port speed only at driver init or speed change

2019-08-30T07:32:35Z

Port speed printing was added by commit d948e6383ec3 ("scsi: fnic: Add port speed stat to fnic debug stats"). As currently configured, this will cause the port speed to be printed to syslog every 2 seconds. To prevent log spamming, only print the vnic port speed at driver initialization and if the speed changes. Also clean up a small typo in fnic_trace.c. Fixes: d948e6383ec3 ("scsi: fnic: Add port speed stat to fnic debug stats") Signed-off-by: John Pittman Reviewed-by: Satish Kharat Signed-off-by: Martin K. Petersen

scsi: fnic: remove redundant assignment of variable rc

2019-08-20T01:51:00Z

Variable ret is initialized to a value that is never read and it is re-assigned later and immediately returns. Clean up the code by removing rc and just returning 0. [mkp: typo] Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King Acked-by: Karan Tilak Kumar Signed-off-by: Martin K. Petersen

scsi: fnic: Remove set but not used variable 'vdev'

2019-01-29T06:16:09Z

Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/fnic/vnic_wq.c: In function 'vnic_wq_alloc_bufs': drivers/scsi/fnic/vnic_wq.c:50:19: warning: variable 'vdev' set but not used [-Wunused-but-set-variable] drivers/scsi/fnic/vnic_rq.c: In function 'vnic_rq_alloc_bufs': drivers/scsi/fnic/vnic_rq.c:30:19: warning: variable 'vdev' set but not used [-Wunused-but-set-variable] Never used since introduction. Signed-off-by: YueHaibing Acked-by: Satish Kharat Signed-off-by: Martin K. Petersen