kernel.git/drivers/scsi/bfa/bfad.c, branch linux-3.2.y

bfa: Chinook quad port 16G FC HBA claim issue

2014-04-01T23:58:39Z

commit dcaf9aed995c2b2a49fb86bbbcfa2f92c797ab5d upstream. Bfa driver crash is observed while pushing the firmware on to chinook quad port card due to uninitialized bfi_image_ct2 access which gets initialized only for CT2 ASIC based cards after request_firmware(). For quard port chinook (CT2 ASIC based), bfi_image_ct2 is not getting initialized as there is no check for chinook PCI device ID before request_firmware and instead bfi_image_cb is initialized as it is the default case for card type check. This patch includes changes to read the right firmware for quad port chinook. Signed-off-by: Vijaya Mohan Guvva Signed-off-by: James Bottomley Signed-off-by: Ben Hutchings

[SCSI] bfa: Add FC-transport based Asynchronous Event Notification support.

2011-07-27T10:41:24Z

- Added support to post vendor unique events on fc_host. - Supports adapter, port, ioc, flash and remote port based AEN events. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: Driver and BSG enhancements.

2011-06-29T22:28:17Z

- Added a new module parameter max_xfer_size to set the max_sectors in the scsi_host template. - Added logic to handle request_irq() failure so that msix vector resource is de-allocated immediately when failure happens. - BSG enhancements to collect vHBA releated info and port log. - Removed the workaround of incrementing the module refcnt on bsg request. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: FCS bug fixes.

2011-06-29T22:12:11Z

- Added logic to initiate a PLOGI to the target, while processing a LOGO from the same target in Direct attach mode. - Added logic to generate a FCCT Reject indicating unsupported command, upon receiving FCCT/FCGS requests. - Added logic to set the fcpim in offline state and avoid any PRLI retries if a PRLI response is a reject with a reason Command Not Supported. - Updated the FDMI Supported/Current speeds. - Added logic to wait for the response from the firmware before sending ACC to PLOGI and transitioning to subsequent states - while processing an Incoming PLOGI in online state. - Added a wait state in the fcs_vport state machine - For case where FDISC is in progress and we get a vport delete request we wait for fdisc response and will transition to the appropriate state based on rsp status, else its causing both driver/fw resources to be not freed. - Remove the fc_credit_recovery module param. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: DMA memory allocation enhancement.

2011-06-29T22:11:09Z

- Modified the design such that each BFA sub-module will provide the amount of DMA and KVA memory needed by it and queues the same request to the global dma and kva info queues. - During the memory allocation we iterate over this queue to allocate the dma and kva memory requested by sub-modules. - The change is needed to avoid requesting the aggregate amount of memory needed by all the BFA sub-modules as one contiguous chunk. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.

2011-06-29T21:59:59Z

- If flash controller is halted unconditionally, this results in illegal write access to flash controller register domain. Since flash controller registers are only accessible once s_clk is started - added logic to check for WGN status and halt flash controller only if it is already running. - Added check to wait for flash controller halt to be completed before proceeding with s_clk/l_clk initializations. - Removed unnecessary reset logic for PMM 1T memory and moved memory initialization after flash access enable. - Disable Brocade-1860 asic MBOX interrupt before PLL initialization. - Remove reset enable for S_CLK/L_CLK after both PLL initializations are complete. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: Enable ASIC block configuration and query.

2011-06-29T21:56:05Z

- Added ASIC block configuration APIs: - to create/delete/update the physical functions - to do adapter/port mode configuration - to query the current ASIC block configuration. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: Driver initialization and model description fix

2011-06-29T20:56:05Z

- Moved FCS initialization, which internally does the im_port creation as well as the scsi_host creation before bfa_init. Once the bfa_init is complete & successful: - Reset the FCS base port cfg params such as pwwn/nwwn and setup fc host params - based on the values learned during the ioc getattr request. - Change needed to support BSG commands even on bfa init failure. - Model description fixes for Brocade adapters. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: FC credit recovery and misc bug fixes.

2011-06-29T20:52:21Z

- Introduce FC credit recovery. - Added module parameter to enable/disable credit recovery. Bug Fixes: - Removed check for ignoring plogi from initiator in switched fabric mode. - The ABTS for PLOGI is going out few millisecs earlier due to FW timer calibration (around 300 miilisecs earlier). So there is a window if an accept comes during this time HBA would have initiated an ABORT. - Added 1 to FC_ELS_TOV for compensating for FW timer. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley

[SCSI] bfa: Brocade-1860 Fabric Adapter 16Gbs support and flash controller fixes.

2011-06-29T20:50:50Z

- Added support for 16Gbps. - Added logic to flush pending mailbox command queue when IOC is disabled. - Fix to Halt the flash controller during fw initialization - since when asic blck is programmed flash controller's continuous access blocks f/w access to flash. - Added new asic based card types and modified IOC get card model routine. - Added PLL init fix to do LPU reset every time we do a memory initialization, since not doing so will cause LPU to be uninitialized during driver load. - Added fix to Halt flash controller before PLL initialization. Signed-off-by: Krishna Gudipati Signed-off-by: James Bottomley