kernel.git/drivers/scsi/aacraid/linit.c, branch linux-4.4.y

aacraid: Start adapter after updating number of MSIX vectors

2018-11-10T15:41:36Z

[ Upstream commit 116d77fea02e2a5aded7d29ba4c692774cb339f1 ] The adapter has to be started after updating the number of MSIX Vectors Fixes: ecc479e00db8 (aacraid: Set correct MSIX count for EEH recovery) Cc: stable@vger.kernel.org Signed-off-by: Raghava Aditya Renukunta Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: aacraid: Insure command thread is not recursively stopped

2018-05-30T05:49:07Z

[ Upstream commit 1c6b41fb92936fa5facea464d5d7cbf855966d04 ] If a recursive IOP_RESET is invoked, usually due to the eh_thread handling errors after the first reset, be sure we flag that the command thread has been stopped to avoid an Oops of the form; [ 336.620256] CPU: 28 PID: 1193 Comm: scsi_eh_0 Kdump: loaded Not tainted 4.14.0-49.el7a.ppc64le #1 [ 336.620297] task: c000003fd630b800 task.stack: c000003fd61a4000 [ 336.620326] NIP: c000000000176794 LR: c00000000013038c CTR: c00000000024bc10 [ 336.620361] REGS: c000003fd61a7720 TRAP: 0300 Not tainted (4.14.0-49.el7a.ppc64le) [ 336.620395] MSR: 9000000000009033 CR: 22084022 XER: 20040000 [ 336.620435] CFAR: c000000000130388 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1 [ 336.620435] GPR00: c00000000013038c c000003fd61a79a0 c0000000014c7e00 0000000000000000 [ 336.620435] GPR04: 000000000000000c 000000000000000c 9000000000009033 0000000000000477 [ 336.620435] GPR08: 0000000000000477 0000000000000000 0000000000000000 c008000010f7d940 [ 336.620435] GPR12: c00000000024bc10 c000000007a33400 c0000000001708a8 c000003fe3b881d8 [ 336.620435] GPR16: c000003fe3b88060 c000003fd61a7d10 fffffffffffff000 000000000000001e [ 336.620435] GPR20: 0000000000000001 c000000000ebf1a0 0000000000000001 c000003fe3b88000 [ 336.620435] GPR24: 0000000000000003 0000000000000002 c000003fe3b88840 c000003fe3b887e8 [ 336.620435] GPR28: c000003fe3b88000 c000003fc8181788 0000000000000000 c000003fc8181700 [ 336.620750] NIP [c000000000176794] exit_creds+0x34/0x160 [ 336.620775] LR [c00000000013038c] __put_task_struct+0x8c/0x1f0 [ 336.620804] Call Trace: [ 336.620817] [c000003fd61a79a0] [c000003fe3b88000] 0xc000003fe3b88000 (unreliable) [ 336.620853] [c000003fd61a79d0] [c00000000013038c] __put_task_struct+0x8c/0x1f0 [ 336.620889] [c000003fd61a7a00] [c000000000171418] kthread_stop+0x1e8/0x1f0 [ 336.620922] [c000003fd61a7a40] [c008000010f7448c] aac_reset_adapter+0x14c/0x8d0 [aacraid] [ 336.620959] [c000003fd61a7b00] [c008000010f60174] aac_eh_host_reset+0x84/0x100 [aacraid] [ 336.621010] [c000003fd61a7b30] [c000000000864f24] scsi_try_host_reset+0x74/0x180 [ 336.621046] [c000003fd61a7bb0] [c000000000867ac0] scsi_eh_ready_devs+0xc00/0x14d0 [ 336.625165] [c000003fd61a7ca0] [c0000000008699e0] scsi_error_handler+0x550/0x730 [ 336.632101] [c000003fd61a7dc0] [c000000000170a08] kthread+0x168/0x1b0 [ 336.639031] [c000003fd61a7e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4 [ 336.645971] Instruction dump: [ 336.648743] 384216a0 7c0802a6 fbe1fff8 f8010010 f821ffd1 7c7f1b78 60000000 60000000 [ 336.657056] 39400000 e87f0838 f95f0838 7c0004ac <7d401828> 314affff 7d40192d 40c2fff4 [ 336.663997] -[ end trace 4640cf8d4945ad95 ]- So flag when the thread is stopped by setting the thread pointer to NULL. Signed-off-by: Dave Carroll Reviewed-by: Raghava Aditya Renukunta Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: aacraid: fix shutdown crash when init fails

2018-05-30T05:48:58Z

[ Upstream commit 00c20cdc79259c6c5bf978b21af96c2d3edb646d ] When aacraid init fails with "AAC0: adapter self-test failed.", shutdown leads to UBSAN warning and then oops: [154316.118423] ================================================================================ [154316.118508] UBSAN: Undefined behaviour in drivers/scsi/scsi_lib.c:2328:27 [154316.118566] member access within null pointer of type 'struct Scsi_Host' [154316.118631] CPU: 2 PID: 14530 Comm: reboot Tainted: G W 4.15.0-dirty #89 [154316.118701] Hardware name: Hewlett Packard HP NetServer/HP System Board, BIOS 4.06.46 PW 06/25/2003 [154316.118774] Call Trace: [154316.118848] dump_stack+0x48/0x65 [154316.118916] ubsan_epilogue+0xe/0x40 [154316.118976] __ubsan_handle_type_mismatch+0xfb/0x180 [154316.119043] scsi_block_requests+0x20/0x30 [154316.119135] aac_shutdown+0x18/0x40 [aacraid] [154316.119196] pci_device_shutdown+0x33/0x50 [154316.119269] device_shutdown+0x18a/0x390 [...] [154316.123435] BUG: unable to handle kernel NULL pointer dereference at 000000f4 [154316.123515] IP: scsi_block_requests+0xa/0x30 This is because aac_shutdown() does struct Scsi_Host *shost = pci_get_drvdata(dev); scsi_block_requests(shost); and that assumes shost has been assigned with pci_set_drvdata(). However, pci_set_drvdata(pdev, shost) is done in aac_probe_one() far after bailing out with error from calling the init function ((*aac_drivers[index].init)(aac)), and when the init function fails, no error is returned from aac_probe_one() so PCI layer assumes there is driver attached, and tries to shut it down later. Fix it by returning error from aac_probe_one() when card-specific init function fails. This fixes reboot on my HP NetRAID-4M with dead battery. Signed-off-by: Meelis Roos Reviewed-by: Dave Carroll Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

aacraid: Set correct msix count for EEH recovery

2016-04-12T16:08:38Z

commit ecc479e00db8eb110b200afe1effcb3df20ca7ae upstream. During EEH recovery number of online CPU's might change thereby changing the number of MSIx vectors. Since each fib is allocated to a vector, changes in the number of vectors causes fib to be sent thru invalid vectors.In addition the correct number of MSIx vectors is not updated in the INIT struct sent to the controller, when it is reinitialized. Fixed by reassigning vectors to fibs based on the updated number of MSIx vectors and updating the INIT structure before sending to controller. Fixes: MSI-X vector calculation for suspend/resume Signed-off-by: Raghava Aditya Renukunta Reviewed-by: Shane Seymour Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

aacraid: IOCTL fix

2015-11-10T00:07:31Z

Driver blocks ioctls once it received shutdown/suspend request during suspend/hybernation. This patch unblocks ioctls on resume path. Reviewed-by: Tomas Henzl Reviewed-by: Murthy Bhat Reviewed-by: Karthikeya Sunkesula Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley

aacraid: Add Power Management support

2015-11-09T23:59:18Z

* .suspend() and .resume() routines implemented in the driver * aac_release_resources() initiates firmware shutdown * aac_acquire_resources re-initializes the host interface Reviewed-by: Tomas Henzl Reviewed-by: Murthy Bhat Reviewed-by: Karthikeya Sunkesula Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley

aacraid: driver version change

2015-04-09T23:57:01Z

Signed-off-by: Mahesh Rajashekhara Reviewed-by: Hannes Reinecke Reviewed-by: Murthy Bhat Signed-off-by: James Bottomley

aacraid: performance improvement changes

2015-04-09T23:55:21Z

Signed-off-by: Mahesh Rajashekhara Reviewed-by: Hannes Reinecke Reviewed-by: Murthy Bhat Signed-off-by: James Bottomley

aacraid: IOCTL fix

2015-04-09T23:54:40Z

After getting the platform shutdown command "VM_CloseAll" response from the firmware, driver was getting configuration IOCTL request from the upper layers and it sends down to firmware. This causes firmware assert issue. This patch fixes the firmware assert issue. During the shutdown, if driver gets commands from the upper layer, driver sends error code to the upper layers. Signed-off-by: Mahesh Rajashekhara Reviewed-by: Hannes Reinecke Reviewed-by: Murthy Bhat Signed-off-by: James Bottomley

aacraid: MSI-x support

2015-04-09T23:48:15Z

Signed-off-by: Mahesh Rajashekhara Reviewed-by: Hannes Reinecke Reviewed-by: Murthy Bhat Signed-off-by: James Bottomley