kernel.git/drivers/scsi/aacraid/commsup.c, branch linux-3.16.y

scsi: aacraid: Fix memory leak in fib init path

2017-06-05T20:17:14Z

commit 1bff5abca65d4b9761fcc992ab6288243220003d upstream. aac_fib_map_free frees misaligned fib dma memory, additionally it does not free up the whole memory. Fixed by changing the code to free up the correct and full memory allocation. Fixes: e8b12f0fb835223 ([SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller family) Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen [bwh: Backported to 3.16: s/max_cmd_size/max_fib_size/] Signed-off-by: Ben Hutchings

aacraid: Fix for aac_command_thread hang

2016-08-22T21:37:52Z

commit fc4bf75ea300a5e62a2419f89dd0e22189dd7ab7 upstream. Typically under error conditions, it is possible for aac_command_thread() to miss the wakeup from kthread_stop() and go back to sleep, causing it to hang aac_shutdown. In the observed scenario, the adapter is not functioning correctly and so aac_fib_send() never completes (or time-outs depending on how it was called). Shortly after aac_command_thread() starts it performs aac_fib_send(SendHostTime) which hangs. When aac_probe_one /aac_get_adapter_info send time outs, kthread_stop is called which breaks the command thread out of it's hang. The code will still go back to sleep in schedule_timeout() without checking kthread_should_stop() so it causes aac_probe_one to hang until the schedule_timeout() which is 30 minutes. Fixed by: Adding another kthread_should_stop() before schedule_timeout() Signed-off-by: Raghava Aditya Renukunta Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen Signed-off-by: Ben Hutchings

aacraid: Relinquish CPU during timeout wait

2016-08-22T21:37:52Z

commit 07beca2be24cc710461c0b131832524c9ee08910 upstream. aac_fib_send has a special function case for initial commands during driver initialization using wait < 0(pseudo sync mode). In this case, the command does not sleep but rather spins checking for timeout.This loop is calls cpu_relax() in an attempt to allow other processes/threads to use the CPU, but this function does not relinquish the CPU and so the command will hog the processor. This was observed in a KDUMP "crashkernel" and that prevented the "command thread" (which is responsible for completing the command from being timed out) from starting because it could not get the CPU. Fixed by replacing "cpu_relax()" call with "schedule()" Signed-off-by: Raghava Aditya Renukunta Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen Signed-off-by: Ben Hutchings

aacraid: Fix memory leak in aac_fib_map_free

2016-04-30T22:05:50Z

commit f88fa79a61726ce9434df9b4aede36961f709f17 upstream. aac_fib_map_free() calls pci_free_consistent() without checking that dev->hw_fib_va is not NULL and dev->max_fib_size is not zero.If they are indeed NULL/0, this will result in a hang as pci_free_consistent() will attempt to invalidate cache for the entire 64-bit address space (which would take a very long time). Fixed by adding a check to make sure that dev->hw_fib_va and dev->max_fib_size are not NULL and 0 respectively. Fixes: 9ad5204d6 - "[SCSI]aacraid: incorrect dma mapping mask during blinked recover or user initiated reset" Signed-off-by: Raghava Aditya Renukunta Reviewed-by: Johannes Thumshirn Reviewed-by: Tomas Henzl Signed-off-by: Martin K. Petersen Signed-off-by: Ben Hutchings

drivers: avoid parsing names as kthread_run() format strings

2013-07-03T23:07:41Z

Calling kthread_run with a single name parameter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents. Signed-off-by: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[SCSI] aacraid: Series 7 Async. (performance) mode support

2012-07-20T07:59:04Z

- Series 7 Async. (performance) mode support added - New scatter/gather list format for Series 7 - Driver converts s/g list to a firmware suitable list for best performance on Series 7, this can be disabled with driver parameter "aac_convert_sgl" for testing purposes - New container read/write command structure for Series 7 - Fast response support for the SCSI pass-through path added - Async. status response buffer changes Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley

[SCSI] aacraid: Relax the tight timeout loop on fib commands

2012-07-20T07:58:44Z

The loop that waited for syncronous fib commands was causing a CPU stall when a timeout actually occured. 1) Switch to using a more accurate timeout mechanism. 2) Do not pace the loop with udelay(). Use cpu_relax() to allow for scheduling to occur. Signed-off-by: Ben Collins Acked-by: Achim Leubner Signed-off-by: James Bottomley

[SCSI] aacraid: Added Sync.mode to support series 7/8/9 controllers

2012-02-19T14:09:01Z

Added Sync. mode to support Series 7/8/9 controller families: This is a compatibility mode for all these controller families. The Async. (Performance) mode can be changed in the future. First Async. mode version added for Series 7; Controller parameter aac_sync_mode added Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley

[SCSI] aacraid: reset should disable MSI interrupt

2011-09-22T07:17:32Z

scsi reset on hardware with enabled MSI interrupts generates WARNING message [11027.798722] aacraid: Host adapter abort request (0,0,0,0) [11027.798814] aacraid: Host adapter reset request. SCSI hang ? [11087.762237] aacraid: SCSI bus appears hung [11135.082543] ------------[ cut here ]------------ [11135.082646] WARNING: at drivers/pci/msi.c:658 pci_enable_msi_block+0x251/0x290() Signed-off-by: Vasily Averin Acked-by: Mark Salyzyn Cc: stable@kernel.org Signed-off-by: James Bottomley

Fix common misspellings

2011-03-31T14:26:23Z

Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi