kernel.git/drivers/s390/scsi, branch linux-2.6.34.y

[SCSI] zfcp: Fix tracing of requests with error status

2010-04-11T18:31:20Z

When a FSF request is returned with an error it should be reported through blktrace for the ziomon tools, but the latency information should not be read. Fix this by also calling zfcp_fsf_req_trace for the error case, but skip reading the latencies inside the function. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

[S390] remove unused qdio flags in zfcp and qeth

2010-03-08T11:25:30Z

zfcp and qeth are setting flags for the qdio-layer, but these flags are not used in qdio. Patch removes the flag definitions from qdio and their settings in zfcp and qeth. Cc: Jan Glauber Cc: Christof Schmitt Signed-off-by: Ursula Braun Signed-off-by: Martin Schwidefsky

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

2010-02-27T00:55:27Z

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (158 commits) [SCSI] Fix printing of failed 32-byte commands [SCSI] Fix printing of variable length commands [SCSI] libsrp: fix bug in ADDITIONAL CDB LENGTH interpretation [SCSI] scsi_dh_alua: Add IBM Power Virtual SCSI ALUA device to dev list [SCSI] scsi_dh_alua: add netapp to dev list [SCSI] qla2xxx: Update version number to 8.03.02-k1. [SCSI] qla2xxx: EEH: Restore PCI saved state during pci slot reset. [SCSI] qla2xxx: Add firmware ETS burst support. [SCSI] qla2xxx: Correct loop-resync issues during SNS scans. [SCSI] qla2xxx: Correct use-after-free issue in terminate_rport_io callback. [SCSI] qla2xxx: Correct EH bus-reset handling. [SCSI] qla2xxx: Proper clean-up of BSG requests when request times out. [SCSI] qla2xxx: Initialize payload receive length in failure path of vendor commands [SCSI] fix duplicate removal on error path in scsi_sysfs_add_sdev [SCSI] fix refcounting bug in scsi_get_host_dev [SCSI] fix memory leak in scsi_report_lun_scan [SCSI] lpfc: correct PPC build failure [SCSI] raid_class: add raid1e [SCSI] mpt2sas: Do not call sas_is_tlr_enabled for RAID volumes. [SCSI] zfcp: Introduce header file for qdio structs and inline functions ...

[SCSI] zfcp: Introduce header file for qdio structs and inline functions

2010-02-17T23:46:35Z

Move the qdio related structs and some helper functions to a new zfcp_qdio.h header file. While doing this, rename the struct zfcp_queue_req to zfcp_qdio_req to adhere to the naming scheme used in zfcp. This allows a better seperation of the qdio code and inlining the helper functions will save some function calls. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley

[SCSI] zfcp: Replace FC4 constants with information from exchange port

2010-02-17T23:46:33Z

The FC4 types are already available from exchange port. Use this for reporting the FC4 types, instead of having the value hardcoded in zfcp. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley

[SCSI] zfcp: Move scsi result tracing decision to zfcp_dbf.h

2010-02-17T23:46:31Z

Move the decision which trace tag and trace level to use for the scsi result trace to zfcp_dbf.h. zfcp_dbf_scsi_result is already an inline function, so move the trace code there, simplifying the response handling in zfcp_fsf.c. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley

[SCSI] zfcp: Rename sysfs_device attribute to dev in zfcp_unit and zfcp_port

2010-02-17T23:46:30Z

Kernel code uses dev as short name for the struct device. Rename the sysfs_device in zfcp_unit and zfcp_port to match this convention. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley

[SCSI] zfcp: Remove duplicate assignment of req_seq_no

2010-02-17T23:46:28Z

zfcp_fsf_req_create assigns the same value twice to req_seq_no. Remove one assignment and move the req_id and seq_no assignments to one place. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley

[SCSI] zfcp: Dont use 0 to indicate invalid LUN in rec trace

2010-02-17T23:46:27Z

0 is a valid value for a LUN. It is slightly confusing to also see 0 in the trace entries relating to adapter and port. Change this to use 0xFFFFFFFFFFFFFFFF in the LUN field when the trace entry does not relate to a LUN or unit. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley