kernel.git/drivers/s390/crypto, branch linux-2.6.35.y

[S390] avoid default_llseek in s390 drivers

2010-05-17T08:00:16Z

Use nonseekable_open for a couple of s390 device drivers. This avoids the use of default_llseek function which has a dependency on the BKL. Signed-off-by: Martin Schwidefsky

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

[S390] seq_file: convert drivers/s390/

2010-02-26T21:37:32Z

Signed-off-by: Alexey Dobriyan Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

[S390] zcrypt: Do not remove coprocessor for error 8/72

2010-01-27T09:12:49Z

In a case where the number of the input data is bigger than the modulus of the key, the coprocessor adapters will report an 8/72 error. This case is not caught yet, thus the adapter will be taken offline. To prevent this, we return an -EINVAL instead. Signed-off-by: Felix Beck Signed-off-by: Martin Schwidefsky

[S390] zcrypt: add sanity check before copy_from_user()

2010-01-13T19:44:46Z

It's not obvious that copy_from_user() is called with a sane length parameter here. Even though it currently seems to be correct better add a check to prevent stack corruption / exploits. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

[S390] zcrypt: remove BKL

2009-12-07T11:51:39Z

Signed-off-by: Martin Schwidefsky

[S390] zcrypt: Do not simultaneously schedule hrtimer

2009-12-07T11:51:36Z

Protect the hrtimer ap_poll_timer from being scheduled at the same time from several processes. Signed-off-by: Felix Beck Signed-off-by: Martin Schwidefsky

[S390] zcrypt: adjust speed rating of cex3 adapters

2009-12-07T11:51:36Z

Cex3 needs a lower speed rating. Otherwise cex2 adapters will be prefered. Signed-off-by: Felix Beck Signed-off-by: Martin Schwidefsky

[S390] zcrypt: adjust speed rating between cex2 and pcixcc

2009-12-07T11:51:35Z

Cards with lower speed rating are prefered. Thus change adjust the speed rating of cex2c adapters to be prefered before pcixcc, although they should not appear in the same machine anyway. Signed-off-by: Felix Beck Signed-off-by: Martin Schwidefsky

[S390] zcrypt: use definitions for cex3

2009-12-07T11:51:35Z

New definitions are added for CEX3 device types. They will be set in the according probe functions. CEX3 device types will be handled in the same modules as CEX2 device types. In the first step they are the same as CEX2 types, but they can be adjusted for further characteristics of CEX3 easily. Signed-off-by: Felix Beck Signed-off-by: Ralph Wuerthner Signed-off-by: Martin Schwidefsky