kernel.git/drivers/s390/char, branch linux-4.8.y

s390/vmlogrdr: fix IUCV buffer allocation

2017-01-09T07:21:55Z

commit 5457e03de918f7a3e294eb9d26a608ab8a579976 upstream. The buffer for iucv_message_receive() needs to be below 2 GB. In __iucv_message_receive(), the buffer address is casted to an u32, which would result in either memory corruption or an addressing exception when using addresses >= 2 GB. Fix this by using GFP_DMA for the buffer allocation. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390/con3270: fix insufficient space padding

2016-10-31T11:02:12Z

commit 6cd997db911f28f2510b771691270c52b63ed2e6 upstream. con3270 contains an optimisation that reduces the amount of data to be transmitted to the 3270 terminal by putting a Repeat to Address (RA) order into the data stream. The RA order itself takes up space, so con3270 only uses it if there's enough space left in the line buffer. Otherwise it just pads out the line manually. For lines that were _just_ short enough that the RA order still fit in the line buffer, the line was instead padded with an insufficient amount of spaces. This was caused by examining the size of the allocated line buffer rather than the length of the string to be displayed. For con3270_cline_end(), we just compare against the line length. For con3270_update_string() however that isn't available anymore, so we check whether the Repeat to Address order is present. Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Tested-by: Jing Liu Tested-by: Yang Chen Signed-off-by: Sascha Silbe Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390/con3270: fix use of uninitialised data

2016-10-31T11:02:12Z

commit c14f2aac7aa147861793eed9f41f91dd530f0be1 upstream. con3270 contains an optimisation that reduces the amount of data to be transmitted to the 3270 terminal by putting a Repeat to Address (RA) order into the data stream. The RA order itself takes up space, so con3270 only uses it if there's enough space left in the line buffer. Otherwise it just pads out the line manually. For lines too long to include the RA order, one byte was left uninitialised. This was caused by an off-by-one bug in the loop that pads out the line. Since the buffer is allocated from a common pool, the single byte left uninitialised contained some previous buffer content. Usually this was just a space or some character (which can result in clutter but is otherwise harmless). Sometimes, however, it was a Repeat to Address order, messing up the entire screen layout and causing the display to send the entire buffer content on every keystroke. Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Reported-by: Liu Jing Tested-by: Jing Liu Tested-by: Yang Chen Signed-off-by: Sascha Silbe Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2016-08-02T20:11:27Z

Pull KVM updates from Paolo Bonzini: - ARM: GICv3 ITS emulation and various fixes. Removal of the old VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits) KVM: PPC: Introduce KVM_CAP_PPC_HTM MIPS: Select HAVE_KVM for MIPS64_R{2,6} MIPS: KVM: Reset CP0_PageMask during host TLB flush MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX() MIPS: KVM: Sign extend MFC0/RDHWR results MIPS: KVM: Fix 64-bit big endian dynamic translation MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase MIPS: KVM: Use 64-bit CP0_EBase when appropriate MIPS: KVM: Set CP0_Status.KX on MIPS64 MIPS: KVM: Make entry code MIPS64 friendly MIPS: KVM: Use kmap instead of CKSEG0ADDR() MIPS: KVM: Use virt_to_phys() to get commpage PFN MIPS: Fix definition of KSEGX() for 64-bit KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD kvm: x86: nVMX: maintain internal copy of current VMCS KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures KVM: arm64: vgic-its: Simplify MAPI error handling KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers KVM: arm64: vgic-its: Turn device_id validation into generic ID validation ...

s390/console: Make preferred console handling more consistent

2016-07-13T08:58:07Z

Use the same code structure when determining preferred consoles for Linux running as KVM guest as with Linux running in LPAR and z/VM guest: - Extend the console_mode variable to cover vt220 and hvc consoles - Determine sensible console defaults in conmode_default() - Remove KVM-special handling in set_preferred_console() Ensure that the sclp line mode console is also registered when the vt220 console was selected to not change existing behavior that someone might be relying on. As an externally visible change, KVM guest users can now select the 3270 or 3215 console devices using the conmode= kernel parameter, provided that support for the corresponding driver was compiled into the kernel. Signed-off-by: Peter Oberparleiter Signed-off-by: Jing Liu Reviewed-by: Cornelia Huck Signed-off-by: Martin Schwidefsky

s390/ipl: rename diagnose enums

2016-06-13T13:58:26Z

Rename DIAG308_IPL and DIAG308_DUMP to DIAG308_LOAD_CLEAR and DIAG308_LOAD_NORMAL_DUMP to better reflect the associated IPL functions. Suggested-by: Cornelia Huck Suggested-by: Christian Borntraeger Signed-off-by: Heiko Carstens Acked-by: Michael Holzheu Reviewed-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky

s390/cpuinfo: show dynamic and static cpu mhz

2016-06-13T13:58:17Z

Show the dynamic and static cpu mhz of each cpu. Since these values are per cpu this requires a fundamental extension of the format of /proc/cpuinfo. Historically we had only a single line per cpu and a summary at the top of the file. This format is hardly extendible if we want to add more per cpu information. Therefore this patch adds per cpu blocks at the end of /proc/cpuinfo: cpu : 0 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 cpu : 1 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 cpu : 2 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 cpu : 3 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 Right now each block contains only the dynamic and static cpu mhz, but it can be easily extended like on every other architecture. This extension is supposed to be compatible with the old format. Signed-off-by: Heiko Carstens Acked-by: Sascha Silbe Signed-off-by: Martin Schwidefsky

s390/keyboard: use memdup_user_nul()

2016-06-13T13:58:12Z

Use memdup_user_nul to duplicate a memory region from user-space to kernel-space and terminate with a NULL, instead of open coding using kmalloc + copy_from_user and explicitly NULL terminating. Signed-off-by: Muhammad Falak R Wani [heiko.carstens@de.ibm.com: remove comment] Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/sclp: detect storage-key facility

2016-06-10T10:07:30Z

Let's correctly detect that facility. Reviewed-by: Christian Borntraeger Signed-off-by: David Hildenbrand Signed-off-by: Christian Borntraeger

s390/sclp: detect interlock-and-broadcast-suppression facility

2016-06-10T10:07:24Z

Let's detect that facility. Reviewed-by: Christian Borntraeger Signed-off-by: David Hildenbrand Signed-off-by: Christian Borntraeger