kernel.git/drivers/s390/char/Makefile, branch linux-4.20.y

s390/kasan: avoid instrumentation of early C code

2018-10-09T09:21:17Z

Instrumented C code cannot run without the kasan shadow area. Exempt source code files from kasan which are running before / used during kasan initialization. Reviewed-by: Martin Schwidefsky Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390/decompressor: avoid reusing uncompressed image objects

2018-06-25T08:14:39Z

Re-compile ebcdic.c and sclp_early_core.c for the decompressor, using proper decompressor CFLAGS. This also allows to potentially use instrumentation for those files when built for the main kernel image. With kbuild there is no easy way to re-compile a source file from another directory. Bypass ugly rules and Makefile meta-programming with relative path includes of original files. Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390: introduce compile time check for empty .bss section

2018-05-09T08:55:01Z

Introduce compile time check for files which should avoid using .bss section, because of the following reasons: - .bss section has not been zeroed yet, - initrd has not been moved to a safe location and could be overlapping with .bss section. Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390/sclp: Add support for Store Data SCLP interface

2018-02-22T14:31:23Z

Add functions to retrieve data associated with an SCLP Store Data entity. Automatically retrieve data for the "config" entity during boot and make that data available to user-space via sysfs: /sys/firmware/sclp_sd/config/data Reading from this file will return config data contents. /sys/firmware/sclp_sd/config/reload Writing to this file will cause the latest version of data related to the config entity to be read from the SCLP interface. Generate a KOBJ_CHANGE whenever new data is retrieved. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky

s390: introduce execute-trampolines for branches

2018-02-07T14:57:02Z

Add CONFIG_EXPOLINE to enable the use of the new -mindirect-branch= and -mfunction_return= compiler options to create a kernel fortified against the specte v2 attack. With CONFIG_EXPOLINE=y all indirect branches will be issued with an execute type instruction. For z10 or newer the EXRL instruction will be used, for older machines the EX instruction. The typical indirect call basr %r14,%r1 is replaced with a PC relative call to a new thunk brasl %r14,__s390x_indirect_jump_r1 The thunk contains the EXRL/EX instruction to the indirect branch __s390x_indirect_jump_r1: exrl 0,0f j . 0: br %r1 The detour via the execute type instruction has a performance impact. To get rid of the detour the new kernel parameter "nospectre_v2" and "spectre_v2=[on,off,auto]" can be used. If the parameter is specified the kernel and module code will be patched at runtime. Signed-off-by: Martin Schwidefsky

s390/sclp: disable FORTIFY_SOURCE for early sclp code

2017-12-13T15:57:02Z

Michal Suchánek reported the following compile error with FORTIFY_SOURCE enabled: drivers/s390/char/sclp_early_core.o: In function `memcpy': include/linux/string.h:340: undefined reference to `fortify_panic' To fix this simply disable FORTIFY_SOURCE on the early sclp code as well, which I forgot on the initial commit. Fixes: 79962038dffa ("s390: add support for FORTIFY_SOURCE") Reported-by: Michal Suchánek Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

s390/sclp: move early printk code to drivers

2017-02-08T13:13:17Z

Move the early sclp printk code to the drivers folder where also the rest of the sclp code can be found. This way it is possible to use the sclp private header files for further cleanups. Reviewed-by: Peter Oberparleiter Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/sclp: move pci related commands to separate file

2016-04-15T16:16:38Z

sclp commands only used by the PCI code shouldn't be build for !CONFIG_PCI. Instead of adding more ifdefs to sclp_cmd.c just move them to a new file. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

s390/sclp_cpi: remove sclp_cpi module in favor of sysfs interface

2015-11-27T08:24:16Z

Since commit c05ffc4f2b20 ("[S390] sclp: sysfs interface for SCLP cpi"), which was made 2008 the user can specify a system and sysplex name through the /sys/firmware/cpi interface. In addition to sysplex and system name, the user can also override the system type and system version. Because the syfs interface is easier to use and allows the settings to be updated, the sclp_cpi module becomes obsolete and can be removed. Signed-off-by: Hendrik Brueckner Acked-by: Christian Borntraeger Acked-by: Heiko Carstens Signed-off-by: Martin Schwidefsky