kernel.git/drivers/regulator/of_regulator.c, branch linux-4.18.y

regulator: Fix 'do-nothing' value for regulators without suspend state

2018-10-03T23:59:19Z

commit 3edd79cf5a44b12dbb13bc320f5788aed6562b36 upstream. Some regulators don't have all states defined and in such cases regulator core should not assume anything. However in current implementation of of_get_regulation_constraints() DO_NOTHING_IN_SUSPEND enable value was set only for regulators which had suspend node defined, otherwise the default 0 value was used, what means DISABLE_IN_SUSPEND. This lead to broken system suspend/resume on boards, which had simple regulator constraints definition (without suspend state nodes). To avoid further mismatches between the default and uninitialized values of the suspend enabled/disabled states, change the values of the them, so default '0' means DO_NOTHING_IN_SUSPEND. Fixes: 72069f9957a1: regulator: leave one item to record whether regulator is enabled Signed-off-by: Marek Szyprowski Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

regulator: core: Parse coupled regulators properties

2018-05-17T07:05:48Z

On Odroid XU3/4 and other Exynos5422 based boards there is a case, that different devices on the board are supplied by different regulators with non-fixed voltages. If one of these devices temporarily requires higher voltage, there might occur a situation that the spread between devices' voltages is so high, that there is a risk of changing 'high' and 'low' states on the interconnection between devices powered by those regulators. Add new structure "coupling_desc" to regulator_dev, which contains pointers to all coupled regulators including the owner of the structure, number of coupled regulators and counter of currently resolved regulators. Add of_functions to parse all data needed in regulator coupling. Provide method to check DTS data consistency. Check if each coupled regulator's max_spread is equal and if their lists of regulators match. Signed-off-by: Maciej Purski Signed-off-by: Mark Brown

regulator: of: add support for allowed modes configuration

2018-05-17T05:11:19Z

Add support for configuring the machine constraints valid_modes_mask element based on a list of allowed modes specified via a device tree property. Signed-off-by: David Collins Signed-off-by: Mark Brown

regulator: Don't return or expect -errno from of_map_mode()

2018-04-20T11:45:36Z

In of_get_regulation_constraints() we were taking the result of of_map_mode() (an unsigned int) and assigning it to an int. We were then checking whether this value was -EINVAL. Some implementers of of_map_mode() were returning -EINVAL (even though the return type of their function needed to be unsigned int) because they needed to signal an error back to of_get_regulation_constraints(). In general in the regulator framework the mode is always referred to as an unsigned int. While we could fix this to be a signed int (the highest value we store in there right now is 0x8), it's actually pretty clean to just define the regulator mode 0x0 (the lack of any bits set) as an invalid mode. Let's do that. Fixes: 5e5e3a42c653 ("regulator: of: Add support for parsing initial and suspend modes") Suggested-by: Javier Martinez Canillas Signed-off-by: Douglas Anderson Reviewed-by: Javier Martinez Canillas Signed-off-by: Mark Brown

regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'

2018-02-12T12:05:31Z

If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must release the reference on the current 'child' node before returning. Signed-off-by: Christophe JAILLET Signed-off-by: Mark Brown

Merge branch 'topic/suspend' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-core

2018-01-26T17:40:03Z

regulator: core: Move of_find_regulator_by_node() to of_regulator.c

2018-01-26T15:48:07Z

As of_find_regulator_by_node() is an of function it should be moved from core.c to of_regulator.c. It provides better separation of device tree functions from the core and allows other of_functions in of_regulator.c to resolve device_node to regulator_dev. This will be useful for implementation of parsing coupled regulators properties. Declare of_find_regulator_by_node() function in internal.h as well as regulator_class and dev_to_rdev(), as they are needed by of_find_regulator_by_node(). Signed-off-by: Maciej Purski Signed-off-by: Mark Brown

regulator: add PM suspend and resume hooks

2018-01-26T14:43:55Z

In this patch, consumers are allowed to set suspend voltage, and this actually just set the "uV" in constraint::regulator_state, when the regulator_suspend_late() was called by PM core through callback when the system is entering into suspend, the regulator device would act suspend activity then. And it assumes that if any consumer set suspend voltage, the regulator device should be enabled in the suspend state. And if the suspend voltage of a regulator device for all consumers was set zero, the regulator device would be off in the suspend state. This patch also provides a new function hook to regulator devices for resuming from suspend states. Signed-off-by: Chunyan Zhang Signed-off-by: Mark Brown

regulator: leave one item to record whether regulator is enabled

2018-01-26T14:43:46Z

The items "disabled" and "enabled" are a little redundant, since only one of them would be set to record if the regulator device should keep on or be switched to off in suspend states. So in this patch, the "disabled" was removed, only leave the "enabled": - enabled == 1 for regulator-on-in-suspend - enabled == 0 for regulator-off-in-suspend - enabled == -1 means do nothing when entering suspend mode. Signed-off-by: Chunyan Zhang Signed-off-by: Mark Brown

Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-09-05T19:19:08Z

Pull power management updates from Rafael Wysocki: "This time (again) cpufreq gets the majority of changes which mostly are driver updates (including a major consolidation of intel_pstate), some schedutil governor modifications and core cleanups. There also are some changes in the system suspend area, mostly related to diagnostics and debug messages plus some renames of things related to suspend-to-idle. One major change here is that suspend-to-idle is now going to be preferred over S3 on systems where the ACPI tables indicate to do so and provide requsite support (the Low Power Idle S0 _DSM in particular). The system sleep documentation and the tools related to it are updated too. The rest is a few cpuidle changes (nothing major), devfreq updates, generic power domains (genpd) framework updates and a few assorted modifications elsewhere. Specifics: - Drop the P-state selection algorithm based on a PID controller from intel_pstate and make it use the same P-state selection method (based on the CPU load) for all types of systems in the active mode (Rafael Wysocki, Srinivas Pandruvada). - Rework the cpufreq core and governors to make it possible to take cross-CPU utilization updates into account and modify the schedutil governor to actually do so (Viresh Kumar). - Clean up the handling of transition latency information in the cpufreq core and untangle it from the information on which drivers cannot do dynamic frequency switching (Viresh Kumar). - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek cpufreq driver and update its DT bindings (Sean Wang). - Modify the cpufreq dt-platdev driver to autimatically create cpufreq devices for the new (v2) Operating Performance Points (OPP) DT bindings and update its whitelist of supported systems (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley Xiao). - Add support for Ux500 to the cpufreq-dt driver and drop the obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann). - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem Nguyen). - Fix and clean up assorted issues in the cpufreq drivers and core (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva, Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla). - Update the IO-wait boost handling in the schedutil governor to make it less aggressive (Joel Fernandes). - Rework system suspend diagnostics to make it print fewer messages to the kernel log by default, add a sysfs knob to allow more suspend-related messages to be printed and add Low Power S0 Idle constraints checks to the ACPI suspend-to-idle code (Rafael Wysocki, Srinivas Pandruvada). - Prefer suspend-to-idle over S3 on ACPI-based systems with the ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM interface present in the ACPI tables (Rafael Wysocki). - Update documentation related to system sleep and rename a number of items in the code to make it cleare that they are related to suspend-to-idle (Rafael Wysocki). - Export a variable allowing device drivers to check the target system sleep state from the core system suspend code (Florian Fainelli). - Clean up the cpuidle subsystem to handle the polling state on x86 in a more straightforward way and to use %pOF instead of full_name (Rafael Wysocki, Rob Herring). - Update the devfreq framework to fix and clean up a few minor issues (Chanwoo Choi, Rob Herring). - Extend diagnostics in the generic power domains (genpd) framework and clean it up slightly (Thara Gopinath, Rob Herring). - Fix and clean up a couple of issues in the operating performance points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz). - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Fix the usage of notifiers in CPU power management on some platforms (Alex Shi). - Update the pm-graph system suspend/hibernation and boot profiling utility (Todd Brandt). - Make it possible to run the cpupower utility without CPU0 (Prarit Bhargava)" * tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits) cpuidle: Make drivers initialize polling state cpuidle: Move polling state initialization code to separate file cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol cpufreq: imx6q: Fix imx6sx low frequency support cpufreq: speedstep-lib: make several arrays static, makes code smaller PM: docs: Delete the obsolete states.txt document PM: docs: Describe high-level PM strategies and sleep states PM / devfreq: Fix memory leak when fail to register device PM / devfreq: Add dependency on PM_OPP PM / devfreq: Move private devfreq_update_stats() into devfreq PM / devfreq: Convert to using %pOF instead of full_name PM / AVS: rockchip-io: add io selectors and supplies for RV1108 cpufreq: ti: Fix 'of_node_put' being called twice in error handling path cpufreq: dt-platdev: Drop few entries from whitelist cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 ARM: ux500: don't select CPUFREQ_DT cpuidle: Convert to using %pOF instead of full_name cpufreq: Convert to using %pOF instead of full_name PM / Domains: Convert to using %pOF instead of full_name cpufreq: Cap the default transition delay value to 10 ms ...