kernel.git/drivers/regulator/lp3971.c, branch linux-3.6.y

regulator: lp3971: Use regulator_list_voltage_table()

2012-06-03T12:25:02Z

Signed-off-by: Axel Lin Signed-off-by: Mark Brown

regulator: core: Use a struct to pass in regulator runtime configuration

2012-04-09T11:37:09Z

Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown

Merge branch 'regulator-register' into regulator-drivers

2012-04-09T11:30:21Z

regulator: lp3971: Constify regulator_desc

2012-04-05T09:41:07Z

Signed-off-by: Axel Lin Signed-off-by: Mark Brown

regulator: lp3971: Convert to module_i2c_driver()

2012-04-04T10:39:17Z

Unusual to see a regulator driver not using subsys_initcall() but with the probe deferral support should be becoming more and more viable. Signed-off-by: Mark Brown

regulator: Convert lp3971 to set_voltage_sel

2012-04-01T10:59:28Z

Signed-off-by: Axel Lin Acked-By: Marek Szyprowski Signed-off-by: Mark Brown

regulator: pass additional of_node to regulator_register()

2011-11-23T18:47:04Z

With device tree support for regulators, its needed that the regulator_dev->dev device has the right of_node attached. To be able to do this add an additional parameter to the regulator_register() api, wherein the dt-adapted driver can then pass this additional info onto the regulator core. Signed-off-by: Rajendra Nayak Signed-off-by: Mark Brown

regulator: Add module.h to drivers/regulator users as required

2011-10-31T23:32:15Z

Another group of drivers that are taking advantage of the implicit presence of module.h -- and will break when we pull the carpet out from under them during a cleanup. Fix 'em now. Signed-off-by: Paul Gortmaker

regulator: Report actual configured voltage to set_voltage()

2011-01-12T14:32:59Z

Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood

regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write()

2010-08-11T10:38:02Z

i2c_smbus_write_byte_data() returns zero or negative value, therefore no need to check if ret is greater than zero or not. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood