kernel.git/drivers/platform/x86/Makefile, branch linux-2.6.37.y

IBM Real-Time "SMI Free" mode driver -v7

2010-10-21T14:10:46Z

After a period of RFC for this driver, I think it is ready for inclusion in the platform-driver-x86 tree, hopefully to be staged in the next merge window into Linus's tree. --Vernon ------------------------------------------------------------ IBM Real-Time "SMI Free" mode driver This driver supports the Real-Time Linux (RTL) BIOS feature. The RTL feature allows non-fatal System Management Interrupts (SMIs) to be disabled on supported IBM platforms and is intended to be coupled with a user-space daemon to monitor the hardware in a way that can be prioritized and scheduled to better suit the requirements for the system. The Device is presented as a special "_RTL_" table to the OS in the Extended BIOS Data Area. There is a simple protocol for entering and exiting the mode at runtime. This driver creates a simple sysfs interface to allow a simple entry and exit from RTL mode in the UFI/BIOS. Since the driver is specific to IBM SystemX hardware (x86- based servers) it only builds on x86 builds. To reduce the risk of loading on the wrong hardware, the module uses DMI information and checks a list of servers that are known to work. Signed-off-by: Vernon Mauery Signed-off-by: Matthew Garrett

Add OLPC XO-1 rfkill driver

2010-10-21T14:10:44Z

Add a software rfkill switch for the WLAN interface in the OLPC XO-1 laptop. It uses the OLPC embedded controller to cut/restore power to the Marvell WLAN chip on the motherboard. Signed-off-by: Daniel Drake Signed-off-by: Matthew Garrett

Move hdaps driver to platform/x86

2010-10-21T14:10:43Z

The hdaps driver isn't a hardware monitoring driver, so it shouldn't live under driver/hwmon. drivers/platform/x86 seems much more appropriate, as the driver is only useful on x86 laptops. Signed-off-by: Jean Delvare Cc: Guenter Roeck Cc: Matthew Garrett Cc: Frank Seidel Signed-off-by: Matthew Garrett

ideapad-laptop: Fix Makefile

2010-10-21T13:36:51Z

The makefile didn't get updated when the driver changed name, which broke the build. Signed-off-by: Matthew Garrett

ideapad: Change the driver name to ideapad-laptop

2010-10-21T13:36:51Z

Since the platform drivers doing more for laptops than just using specific ACPI device. It will be good to change the name from *_acpi to *-laptop. Reference: http://lkml.org/lkml/2010/8/14/154 Signed-off-by: Ike Panhc Acked-by: Len Brown Signed-off-by: Matthew Garrett

Add Lenovo ideapad driver

2010-08-10T23:01:21Z

Signed-off-by: David Woodhouse

gpio: Add PMIC GPIO block support

2010-08-03T13:49:09Z

Moorestown has PMIC chip which contains GPIO blocks. The PMIC chip is connected to Langwell by SPI interface. So this GPIO driver will be regarded as SPI GPIO expander though the actual GPIO access is through IPC and SRAM. The SPI master contoller will probe this device driver by parsing SPIB table. Cleaned up for new IPC, GPE removed and some printk and other tidying by Alan Cox. Fixes for points noted by Matthew Garrett Signed-off-by: Alek Du Signed-off-by: Alan Cox Signed-off-by: Matthew Garrett

rar: Move the RAR driver into the right place as its now clean

2010-08-03T13:48:50Z

We exit staging rar! rar! rar!... Signed-off-by: Alan Cox Signed-off-by: Matthew Garrett Acked-by: Greg Kroah-Hartman

x86 platform driver: intelligent power sharing driver

2010-08-03T13:48:45Z

Intel Core i3/5 platforms with integrated graphics support both CPU and GPU turbo mode. CPU turbo mode is opportunistic: the CPU will use any available power to increase core frequencies if thermal headroom is available. The GPU side is more manual however; the graphics driver must monitor GPU power and temperature and coordinate with a core thermal driver to take advantage of available thermal and power headroom in the package. The intelligent power sharing (IPS) driver is intended to coordinate this activity by monitoring MCP (multi-chip package) temperature and power, allowing the CPU and/or GPU to increase their power consumption, and thus performance, when possible. The goal is to maximize performance within a given platform's TDP (thermal design point). Signed-off-by: Jesse Barnes Signed-off-by: Matthew Garrett

IPC driver for Intel Mobile Internet Device (MID) platforms

2010-05-17T16:06:07Z

The IPC (inter processor communications) is used to provide the communications between kernel and system control units on some embedded Intel x86 platforms. (Various bits of clean up and restructuring by Alan Cox) Signed-off-by: Sreedhara DS Signed-off-by: Alan Cox