kernel.git/drivers/phy/renesas, branch linux-6.16.y

Merge tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

2025-06-05T15:20:21Z

Pull phy updates from Vinod Koul: "As usual featuring couple of new driver and bunch of new device support and some driver changes to Freescale, rockchip driver along with couple of yaml binding conversions. New Support: - Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver - Rockchip usb2 support for RK3562, RK3036 usb2 phy support - Samsung exynos2200 eusb2 phy support and driver refactoring for this support, exynos7870 USBDRD support - Mediatek MT7988 xs-phy support - Broadcom BCM74110 usb phy support - Renesas RZ/V2H(P) usb2 phy support Updates: - Freescale phy rate claculation updates, i.MX95 tuning support - Better error handling for amlogic pcie phy - Rockchip color depth configuration and management support - Yaml binding conversion for RK3399 Type-C and PCIe Phy" * tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits) phy: tegra: p2u: Broaden architecture dependency phy: rockchip: inno-usb2: Add usb2 phy support for rk3562 dt-bindings: phy: rockchip,inno-usb2phy: add rk3562 phy: rockchip: inno-usb2: add phy definition for rk3036 dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P) phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller phy: phy-snps-eusb2: add support for exynos2200 phy: phy-snps-eusb2: refactor reference clock init phy: phy-snps-eusb2: make reset control optional phy: phy-snps-eusb2: make repeater optional phy: phy-snps-eusb2: split phy init code phy: phy-snps-eusb2: refactor constructs names phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory ...

phy: renesas: rcar-gen3-usb2: Set timing registers only once

2025-05-14T11:25:09Z

phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common to all PHYs. There is no need to set them every time a PHY is initialized. Set timing register only when the 1st PHY is initialized. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul

phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off

2025-05-14T11:25:09Z

Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul

phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data

2025-05-14T11:25:09Z

The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul

phy: renesas: rcar-gen3-usb2: Move IRQ request in probe

2025-05-14T11:25:09Z

Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration to init") moved the IRQ request operation from probe to struct phy_ops::phy_init API to avoid triggering interrupts (which lead to register accesses) while the PHY clocks (enabled through runtime PM APIs) are not active. If this happens, it results in a synchronous abort. One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which calls free_irq() on driver removal. Move the IRQ request and free operations back to probe, and take the runtime PM state into account in IRQ handler. This commit is preparatory for the subsequent fixes in this series. Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul

phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind

2025-05-14T11:25:09Z

It has been observed on the Renesas RZ/G3S SoC that unbinding and binding the PHY driver leads to role autodetection failures. This issue occurs when PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt associated with the USB2_INT_ENABLE register (as rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called to initialize OTG without enabling PHY interrupts. To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in role_store(), role_show(), and rcar_gen3_init_otg(). At the same time, rcar_gen3_init_otg() is only called when initialization for a PHY with interrupt bits is in progress. As a result, the struct rcar_gen3_phy::otg_initialized is no longer needed. Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul

phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)

2025-05-14T11:14:59Z

Add USB2.0 PHY support for RZ/V2H(P) SoC. On the RZ/V2H(P) SoC we need to configure the UTMI to a specific value as compared to other SoCs (which doesn't need configuring it). Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20250414145729.343133-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Vinod Koul

phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number

2025-05-14T11:14:59Z

Reorder the compatible entries in `rcar_gen3_phy_usb2_match_table` to maintain sorting based on SoC part numbers. Keep the entries ordered numerically while ensuring the existing generic compatible strings remain at the bottom. Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20250414145729.343133-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Vinod Koul

phy: Switch back to struct platform_driver::remove()

2024-10-17T15:03:03Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/phy/ to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. While touching these files, make indention of the struct initializer consistent in several files. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20241009065307.504930-2-u.kleine-koenig@baylibre.com Signed-off-by: Vinod Koul

phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC

2024-08-30T08:03:44Z

Add support for the Renesas RZ/G3S SoC. The support is similar with the rest of RZ/G2 devices with the except that the RZ/G3S needs bus initialization due to hardware limitation. Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20240822152801.602318-13-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul