kernel.git/drivers/pci/setup-bus.c, branch linux-2.6.24.y

PCI: remove transparent bridge sizing

2007-10-12T22:03:17Z

Remove transparent bridge sizing. Due to code in pci_read_bridge_bases() [drivers/pci/probe.c] the child bus of a transparent bridge already has access to the parent bus resources so transparent bridge sizing appears unnecessary. The bridge sizing includes alignment and granularity adjustments that can cause significantly more memory to be reserved from the parant bus than required by devices on the child bus and allotted by _CRS. Signed-off-by: Gary Hade Signed-off-by: Greg Kroah-Hartman

PCI: ROUND_UP macro cleanup in drivers/pci

2007-07-11T23:02:11Z

ROUND_UP macro cleanup, use ALIGN where ever appropriate Signed-off-by: Milind Arun Choudhary Acked-by: Scott Murray Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

pci: do not mark exported functions as __devinit

2007-05-03T02:02:35Z

Functions marked __devinit will be removed after kernel init. But being exported they are potentially called by a module much later. So the safer choice seems to be to keep the function even in the non CONFIG_HOTPLUG case. This silence the follwoing section mismatch warnings: WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_device from __ksymtab_gpl between '__ksymtab_pci_bus_add_device' (at offset 0x20) and '__ksymtab_pci_walk_bus' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_create_bus from __ksymtab_gpl between '__ksymtab_pci_create_bus' (at offset 0x40) and '__ksymtab_pci_stop_bus_device' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_max_busnr from __ksymtab_gpl between '__ksymtab_pci_bus_max_busnr' (at offset 0xc0) and '__ksymtab_pci_assign_resource_fixed' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_claim_resource from __ksymtab_gpl between '__ksymtab_pci_claim_resource' (at offset 0xe0) and '__ksymtab_pcie_port_bus_type' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_devices from __ksymtab between '__ksymtab_pci_bus_add_devices' (at offset 0x70) and '__ksymtab_pci_bus_alloc_resource' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_scan_bus_parented from __ksymtab between '__ksymtab_pci_scan_bus_parented' (at offset 0x90) and '__ksymtab_pci_root_buses' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_assign_resources from __ksymtab between '__ksymtab_pci_bus_assign_resources' (at offset 0x4d0) and '__ksymtab_pci_bus_size_bridges' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_size_bridges from __ksymtab between '__ksymtab_pci_bus_size_bridges' (at offset 0x4e0) and '__ksymtab_pci_setup_cardbus' Signed-off-by: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

PCI: Make CARDBUS_MEM_SIZE and CARDBUS_IO_SIZE boot options

2007-02-16T23:30:10Z

CARDBUS_MEM_SIZE was increased to 64MB on 2.6.20-rc2, but larger size might result in allocation failure for the reserving itself on some platforms (for example typical 32bit MIPS). Make it (and CARDBUS_IO_SIZE too) customizable by "pci=" option for such platforms. Signed-off-by: Atsushi Nemoto Cc: Daniel Ritz Cc: Ralf Baechle Cc: Ivan Kokshaysky Cc: Dominik Brodowski Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

[PATCH] increase CARDBUS_MEM_SIZE

2006-12-22T16:55:51Z

Linus sayeth: Google knows everything, and finds, on MS own site no less: "Windows 2000 default resources: One 4K memory window One 2 MB memory window Two 256-byte I/O windows" which is clearly utterly bogus and insufficient. But Microsoft apparently realized this, and: "Windows XP default resources: Because one memory window of 4K and one window of 2 MB are not sufficient for CardBus controllers in many configurations, Windows XP allocates larger memory windows to CardBus controllers where possible. However, resource windows are static (that is, the operating system does not dynamically allocate larger memory windows if new devices appear.) Under Windows XP, CardBus controllers will be assigned the following resources: One 4K memory window, as in Windows 2000 64 MB memory, if that amount of memory is available. If 64 MB is not available the controller will receive 32 MB; if 32 MB is not available, the controller will receive 16 MB; if 16 MB is not available, the bridge will receive 8 MB; and so on down to a minimum assignment of 1 MB in configurations where memory is too constrained for the operating system to provide a larger window. Two 256-byte I/O windows" So I think we have our answer. Windows uses one 4k window, and one 64MB window. And they are no more dynamic than we are (we _could_ try to do it dynamically, but let's face it, it's fairly painful to dynamically expand PCI bus resources - you may need to reprogram everything up to the root, so it would be absolutely crazy to do that unless you have some serious masochistic tendencies). So let's just increase our default value to 64M too. Cc: Markus Rechberger Cc: Daniel Ritz Cc: Dominik Brodowski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] fix "PCI: assign ioapic resource at hotplug"

2006-10-04T14:55:14Z

Roland Dreier wrote: > The change "PCI: assign ioapic resource at hotplug" (commit > 23186279658cea6d42a050400d3e79c56cb459b4 in Linus's tree) makes > networking stop working on my system (SuperMicro H8QC8 with four > dual-core Opteron 885 CPUs). In particular, the on-board NIC stops > working, probably because it gets assigned the wrong IRQ (225 in the > non-working case, 217 in the working case) > > With that patch applied, e1000 doesn't work. Reverting just that > patch (shown below) from Linus's latest tree fixes things for me. > The cause of this problem might be an wrong assumption that the 'start' member of resource structure for ioapic device has non-zero value if the resources are assigned by firmware. The 'start' member of ioapic device seems not to be set even though the resources were actually assigned to ioapic devices by firmware. Cc: Kenji Kaneshige Cc: MUNEDA Takahiro Cc: Satoru Takeuchi Cc: Kristen Carlson Accardi Cc: Greg Kroah-Hartman Cc: Roland Dreier Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

PCI: assign ioapic resource at hotplug

2006-09-27T00:43:54Z

We need to assign resources to ioapics being hot-added. This patch changes pbus_assign_resources_sorted() to assign resources if the ioapic has no assigned resources. Signed-off-by: Kenji Kaneshige Signed-off-by: MUNEDA Takahiro Signed-off-by: Satoru Takeuchi Signed-off-by: Kristen Carlson Accardi Signed-off-by: Greg Kroah-Hartman

[PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers

2006-06-27T16:23:58Z

This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal Cc: Vivek Goyal Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

[PATCH] PCI: don't move ioapics below PCI bridge

2006-06-21T19:00:00Z

A recent Stratus x86_64 platform uses a system ioapic that is a PCI device located below a PCI bridge. Other platforms like this may exist. This patch fixes a problem wherein the kernel's PCI setup code moves the ioapic to an address other than that assigned by the BIOS. It simply adds another exclusion (which already includes classless devices and host bridges) to the function pbus_assign_resources_sorted so that it will not move the ioapic. If the ioapic is moved, the fixmap mapping to it is broken, so the OS should leave it alone. From: Kimball Murray Signed-off-by: Greg Kroah-Hartman

cardbus: limit IO windows to 256 bytes

2005-10-23T23:31:16Z

That's what we've always historically done, and bigger windows seem to confuse some cardbus bridges. Or something. Alan reports that this makes the ThinkPad 600x series work properly again: the 4kB IO window for some reason made IDE DMA not work, which makes IDE painfully slow even if it works after DMA timeouts. Signed-off-by: Linus Torvalds